ALTICE LABS MANUAL Smart Wi-Fi User Manual D2260G Version 1.
Smart Wi-Fi User Manual Document’s version history Version Q_PDS_DM_09_V1.2 1.
Copyright © Altice Labs, S.A. All rights reserved. This document contains proprietary information belonging to Altice Labs which is legally protected by copyright and industrial property rights and, as such, may not be copied, photocopied, reproduced, translated or converted into electronic format, either partially or in its entirety, without prior written permission from Altice Labs.
Smart Wi-Fi User Manual Contents Document’s version history ......................................................................................................... 3 List of figures ............................................................................................................................... 7 Glossary ...................................................................................................................................... 9 1 Introduction.....................................
Smart Wi-Fi User Manual List of figures Q_PDS_DM_09_V1.2 Figure 1 – The Smart Wi-Fi Scenario .......................................................................................... 13 Figure 2 – The Extenders hardware ............................................................................................ 17 Figure 3 – Smart Wi-Fi, power supply 110V/12V ........................................................................ 24 Figure 4 – Smart Wi-Fi power on ......................................
Smart Wi-Fi User Manual Glossary Internet Service Provider ITU-T International Telecommunication Union-Telecommunications LAN Local Area Network LED Light Emitting Diode MAC Media Access Control MAN Metropolitan Area Network MTBF Mean Time Between Failures OLT Optical Line Terminal AC Alternating Current AC Access Concentrator AES Advanced Encryption Standard AS AP Autonomous System Access point AUTO-MDIX Medium Dependent Interface Crossover Automatic Choice ONT Optical Network T
Smart Wi-Fi User Manual This User Manual is applicable to the equipment Smart Wi-Fi Altice D2260G with the FCC ID: 2ACJF-EXT-D2260G FCC NOTICE This device complies with FCC part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2.
Smart Wi-Fi User Manual 1 Introduction The Altice Labs Smart Wi-Fi is a certified The solution that creates a clear and powerful Wi-Fi signal for any and all environments, in interior coverage scenarios. The solution incorporate the hardware (FGW-FiberGateway and Smart Wi-Fi AP extenders), a mobile APP (Android &iOS) and a Cloud (web-portal) that unifies, configures, manages, and reports the Wi-Fi Mesh Ecosystem, based on Wi-Fi EasyMesh™ from Wi-Fi Alliance® 1.
Smart Wi-Fi User Manual 1.2 Features Unifies FGW and Extenders into a single network Reduces client roaming and association inconsistencies Both wireless and wireline (Ethernet) connections may be used to link FGW and Extenders while FGW acts as a WLAN controller to the extenders Interoperable mesh solution compliant with Wi-Fi Alliance Multi-AP specification Optimal QoS and throughput performance High performance HW solution based on ultimate IEEE 802.
Smart Wi-Fi User Manual Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual 2 System objectives In a whole-home Wi-Fi scenario, there is an Altice Labs Smart Wi-Fi management controller running on the Gateway, providing the control and management of the entire Mesh Wi-Fi ecosystem, allowing to significantly extend the Wi-Fi coverage of the Gateway and improving overall Wi-Fi Quality-of-Experience (QoE). Those networks use centralized controller software that communicates with Agent entities located at each AP.
Smart Wi-Fi User Manual 3 Smart Extender Figure 2 – The Extenders hardware Q_PDS_DM_09_V1.2 3.1 INTERFACES, LEDS AND BUTTONS Ethernet 2x GBE 10/100/1000 BASE-T Wi-Fi Dual-band 2x2 (2.4GHz) + 4x4 (5GHz) Physical buttons Power(On/OFF); Reset (CPU); WPS LEDs Power led: 1 x bi-color backlit power button; Wi-Fi status: 1 x tri-color (2.
Smart Wi-Fi User Manual 3.1.1 LEDS AND BUTTONS Nominal Modes Extender mode LED (from left to right) NAME 1 POWER 2 Wi-Fi 3 WPS Ethernet ports Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual 2 Wi-Fi 3 WPS when downloading a FW Wifi ON Wifi pausing OFF by default during paring paring sucessful WPS session overlap Ethernet ports No link Off Link Link & Traffic Fix Blinking Alarm modes LED ALARM Temperature WPS Wi-Fi POWER WPS Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual Reset long ≥5s short long <5s ≥5s Q_PDS_DM_09_V1.2 3.
Smart Wi-Fi User Manual Management features: • Mobile APPs -Android and IOS APPs to • Performance & Statistics - Rich dashboarding capabilities • configure and optimize the Wi-Fi service; to explore Wi-Fi indicators at several perspectives, network User Cloud - Access to the cloud with topology, KPI management, reports, symptoms detection customer profile to have full visibility of and alerts; mesh Wi-Fi service performance; • Diagnostics & Troubleshooting - Perform real-time analysis, • Self-Care - Integ
Smart Wi-Fi User Manual Items Compliance Description Proprietary 10 -11 (1024QAM) Wireless Security WEP 40bit secure key and 24 bit as defined in 802.11-2007 WPA WPA2 AES Short Guard Interval SGI support encryption/de-encryption coupled to TKIP (as defined in 802.11-2007 and 802.1X) - Space-Time Block Coding STBC support - Transmit Power (e.ir.p.) - Up to +34dBm in the 2.
Smart Wi-Fi User Manual Environmental Standards Relative humidity, maximum EN300019 Acoustic noise ISO 3743 (<45dBa) ETSI EN 300 132-2 V2.1.
Smart Wi-Fi User Manual 3.3 Get Smart Wi-Fi up and running 3.3.1 Package content Figure 3 – Smart Wi-Fi, power supply 110V/12V 3.3.2 PUT THE Smart Wi-Fi IN OPERATION 3.3.2.1 Power on a) Connect the 110V / 12V power supply between the Smart Wi-Fi (1) and the 110V power outlet Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual Figure 4 – Smart Wi-Fi power on 3.3.2.2 Shut down Press the ON / OFF button (2) to turn off the power 3.3.3 PUT THE SMART MESH IN Wi-Fi NETWORK Press the WPS button (2) to connect to the Wi-Fi network. Press the WPS button on Smart Wi-Fi Q_PDS_DM_09_V1.2 and FiberGateway.
Smart Wi-Fi User Manual 4 User interface 4.1 Mobile application initial screen The Smart Wi-Fi application can be obtained from the Google store for android environments and the Apple store for Apple environments. After installing the application in the respective environment, the initial screen is shown in the following figure: Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual 4.2 Login This is the authentication screen in APP. The user name (Username) and the access key (Password) must be entered. There is also in this screen the possibility to retrieve the forgotten password (Forgot password), show password, and login (Log in). Figure 7 – Mobil application Login 4.3 Initial Setup This screen contains the information of the initial procedure for placing the APP on the home network.
Smart Wi-Fi User Manual 4.3.1 Change name or password In this screen is implemented the Change Name (Wi-Fi SSID) and password change functionality. It is possible to choose the possibility that the password can be visible on the screen. If any of the information provided is invalid then the following information is displayed on the screen: "Unable to change name or password. Special characters ar not allowed." Figure 9 – Change name or password 4.3.2 Ready to Smart Wi-Fi Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual 4.3.3 Add extender Ok, this is a good place to put your extender ": This screen is connected to the domestic WiFi network. The network name is the Wi-Fi SSID. After the connection is made, the next step is to identify a good place to place the smart Wi-Fi extender. To proceed to this step, select "Next".
Smart Wi-Fi User Manual 4.3.5 Good place for extender Position your extender, ideally no more than two rooms away from the Gateway. We can see the symbol in the app changing the color from red (bad place for the extender) to yellow (not a very good place) to green. Ok, this is a good place to put your extender. Figure 13 – Good place for extender 4.3.6 Plug your extender Q_PDS_DM_09_V1.2 Plug your extender and wait until the led gets green.
Smart Wi-Fi User Manual 4.3.7 Connect the extender Press the WPS button in your extender and wait until the message connected appear in the App. Figure 15 – Connect the extender 4.3.8 Name your extender Q_PDS_DM_09_V1.2 After the extender is switched on, some additional configurations are possible, such as giving the extender a different name.
Smart Wi-Fi User Manual 4.4 OnBording After all the initial configurations, it is possible to take advantage of all the features of the Wi-Fi smart mesh application. We can group these features into four groups: Extended Wi-Fi network, network access control (parental control), guest network, and user autonomy. Figure 17 – OnBording 4.4.1 Full Wi-Fi coverage Q_PDS_DM_09_V1.
Smart Wi-Fi User Manual 4.4.2 Parental control Create your own profiles and quickly limit or check the internet usage of family members or groups. Figure 19 – Parental control 4.4.3 Guest Network Q_PDS_DM_09_V1.2 Share your network with your guest without losing your device´s privacy.
Smart Wi-Fi User Manual 4.4.4 Customer autonomy Use your Smart Wi-Fi app to optimize your network with total autonomy. Figure 21 – Customer autonomy 4.5 Home Network Q_PDS_DM_09_V1.2 This screen contains two main areas, namely: One with the topology of the home network, and the other with more information about the various elements of the home network, characteristics of the devices, and general information on data traffic. The network topology shows the available Gateway and Extenders.
Smart Wi-Fi User Manual 4.5.1 New topology This screen displays a new network topology. Figure 23 – New topology 4.5.2 Network detail Q_PDS_DM_09_V1.2 By expanding the bottom window, you gain access to a set of features, namely: 1. Display of network speeds, downward / upward 2. Add a new extender 3. Available nodes 4. Connected devices 5. Access control and profiles 6. Restart network By restarting your gateway, your network will be unavailable for about one minute.
Smart Wi-Fi User Manual 4.5.3 Internet Pause n this screen we can execute a set of functionalities regarding the interruption of access to devices on the internet. This access interruption has a time limit previously defined in the “Pause time” button. We can select device by device or a global selection. Note: These features do not affect the device on which the Smart Wi-Fi App is running. Figura 25 – Internet Pause 4.5.
Smart Wi-Fi User Manual 4.5.5 Activate guest network This screen contains the functionality that allows the activation of guests on the network, maintaining the privacy of the devices on the private network. Guests only have access to the gateway's coverage area. Q_PDS_DM_09_V1.
Rua Eng. José Ferreira Pinto Basto 3810-106 Aveiro Portugal Tel.
IN THE BOX HOW TO CONNECT YOUR NEW SMART Wi-Fi EXTENDER 1 MANUAL INSTALLATION IN 2 STEPS 2 Icon Color Off Press this button to turn on On To turn off, press this button until the lights go off Off The WiFi is disabled Flashing red The extender is not paired with the router Flashing white Poor connection between extender and router Red No connection between extender and router White Good connection to the router WPS Off Automatic pairing is not available WPS Flashing white Pairing in p