Altec Lansing Moondance Glow Digital Speaker System and Alarm Clock for iPod® M402SR User Guide Guide d’utilisation Guía del usuario Guia do Usuário
Welcome Thank you for purchasing the Altec Lansing Moondance Glow speaker system. Designed specifically to work with your iPod, this system provides high-quality audio and radio performance that brings out the best in your music. This Altec Lansing speaker system is designed to work with: International Distribution International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on your region.
Safety Information The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Contents Welcome.................................................................................................................................................................................................. ii Safety Information................................................................................................................................................................................... 1 Package Contents..................................................................................
Package Contents Altec Lansing Moondance Glow speaker system User Guide and Quick Connect Instructions Enhanced remote Miscellaneous adapters for iPod FM radio antenna Wireless snooze remote en Snooze remote receiver Power supply 3
Getting Started How to Install the Backup Battery How to Install the AC Adapter This Altec Lansing Moondance Glow speaker system uses a backup battery system to provide continuous clock settings in the event of a power failure. With the backup battery (not included) installed, if a power failure occurs or the AC cord is accidentally disconnected, the display will not remain lit and the alarm will not function, but the current time will be temporarily maintained.
Placing and Removing Adapters for the iPod Your Altec Lansing Moondance Glow speaker system includes removable adapters for today’s popular iPod models. These adapters ensure that your iPod properly fits in the speaker system’s dock. As new iPod models are introduced, new adapters will be made available to customers. You may also use the adapters supplied with your iPod or available for purchase at www.apple.com. How to Place an Adapter 1 Select the correct adapter for your iPod.
Speaker Features and Indicators Alarm 2 button Alarm 1 button Track forward button Track back button Volume increase button Snooze remote jack Play/snooze/pause button Clock button Volume decrease button Mood light button Source button Power on/off button LCD display AUX jack AC adapter jack Battery compartment FM antenna Universal docking station for iPod 6
Speaker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started section for more information. Press the button. Turn off your speaker system Press the button. Whenever you are finished using your speaker system, please remember to turn it and your iPod or other MP3 player off to conserve electricity. Change audio source Press the Play a track from your iPod In “iPod” mode, press the information.
Speaker Controls 8 Scan radio stations In “FM” mode, press and hold the information. Listen to a non-docking iPod or MP3 player See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system’s AUX jack. Turn on the mood light Press the Set the clock See the Setting the Clock Display section for detailed instructions on setting the clock.
Enhanced Remote Features The enhanced remote lets you operate many functions of your Altec Lansing Moondance Glow speaker system: Turn on your speaker system Press the button. Turn off your speaker system Press the button. Change audio source Press the button to cycle through and select the audio source: iPod, FM radio or AUX. Play a track from your iPod button. See In “iPod” mode, press the the Listening to Your iPod section for more information.
Enhanced Remote Features Tune radio stations In “FM” mode, use the and buttons. See the Listening to the Radio section for additional information. Seek radio stations In “FM” mode, press and hold the information. Store a radio station In “FM” mode, tune to the station you’d like to store, and then press and hold one of the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for more information.
Wireless Snooze Remote Features The wireless snooze remote lets you operate select functions of your Altec Lansing Moondance Glow speaker system from across the room. There’s no need to aim it at the speaker system. button to activate the Snooze Press the snooze timer. Play a track from your iPod button. In “iPod” mode, press the See the Listening to Your iPod section for more information. Pause your iPod In “iPod” mode, press the Dismiss the alarm Press the sounding. or button.
Listening to Your iPod 1 Dock your iPod in the Altec Lansing Moondance Glow speaker system. 2 Select “iPod” mode. How to Access Additional Features on Your iPod Using the Enhanced Remote Shuffle function Press the P1 button once on the enhanced remote to advance to the next icon is displayed shuffle mode. The when the system is in song shuffle mode. icon is displayed when the The system is in album shuffle mode. The icon disappears when the shuffle function has been turned off.
Charging Your iPod Whenever your iPod is docked and your Altec Lansing Moondance Glow speaker system is plugged into an AC outlet, your iPod is charging (until fully charged) – even if the speaker system is switched off. Listening to the FM Radio 1 Plug the FM radio antenna into the speaker system’s FM ANTENNA jack. The jack is located on the back of the system. 2 3 Extend the FM antenna wire fully for best FM reception. Also, do not strip, alter or attach to other antennas.
Listening to a Non-docking iPod or Other Portable Audio Device If you have a non-iPod MP3 player or other non-docking portable audio device, you can enjoy it through your Altec Lansing Moondance Glow speaker system as well. Just connect it via the AUX jack. Here’s how: 1 Locate a 3.5 mm stereo cable (not included). 2 Plug one end of the stereo cable into your device. Your device should have either a headphone or LINE OUT jack for you to plug into.
Mood Light Your Altec Lansing Moondance Glow speaker system is also equipped with a mood light to help you relax and enjoy the music. 2 Choose the color of the ambient light you’d like. Use the and buttons on your speaker system or the enhanced remote to cycle through all the colors the mood light can emit. When the desired color is projected, press the button again to enter the Mood Light Manual Select menu. 3 Select brightness level.
Setting the Clock Display How to Set the Clock Time and Date 1 4 The CLOCK button is located on the back of your Altec Lansing speaker system. This puts you in the Time/Date Set mode. 2 Select either 12-Hour or 24-Hour Clock mode. Press the or button on your speaker system or the enhanced remote to select either 12-Hour or 24-Hour Clock mode. Then press the CLOCK button to save this setting and enter the Hour Set mode. 3 5 Set AM/PM.
Setting the Clock Display 7 Set the month. Use the and buttons on your speaker system or the enhanced remote to select the month. Press the CLOCK button to save this setting and enter the Date Set mode. Song Information/ If song information is available on your iPod or from Date your radio station, it is displayed. If no song information is available, only the date is displayed. 8 9 Set the date. Song Information Only the song information is displayed, if available.
Setting the Alarm Your Altec Lansing speaker system has two separate alarms. How to Set Alarm 1 1 Press and hold the button for 3 seconds. This puts you in the Alarm Set mode for alarm 1. 2 5 Select AM or PM. Use the and buttons on your speaker system or the enhanced remote to select AM or PM. Then press the button to save this setting and enter the Alarm Day Select mode. Turn Alarm 1 on/off Use the and buttons on your speaker system or the enhanced remote to select alarm ON.
Setting the Alarm 8 7 Press the or button on your speaker system or the enhanced remote to select the snooze duration. The default snooze duration is 9 minutes and can be adjusted from 5 minutes to 60 minutes in increments of 1 minute. Then press the button to save this setting and enter the Alarm Volume Set mode. Set the alarm source. Press the or button on your speaker system or the enhanced remote to select the alarm source (iPod, FM radio or buzzer).
Setting the Sleep Timer Maintaining Your Speaker System Your Altec Lansing speaker system is equipped with a sleep timer that automatically turns off the unit 5 to 90 minutes after it has been set. Place your speaker system on a level surface away from sources of direct sunlight or excessive heat. How to Set the Sleep Timer Protect your furniture with a cloth or other protective material when placing your speaker system on a natural wood or lacquered finish. 1 2 3 Turn on the speaker system.
Troubleshooting Symptom Possible Problem Solution Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system. Speaker system doesn’t respond (no power) AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working.
Troubleshooting Symptom Possible Problem Solution iPod is not installed properly Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod. Then reseat it in the dock. iPod is locked up Please make sure your iPod is working properly before docking into the unit. Please refer to your iPod manual for details.
Troubleshooting Symptom Wireless snooze remote doesn’t work. Possible Problem Solution Battery is weak Replace current battery with a new battery. Snooze remote receiver is not properly plugged into speaker system See How to Connect and Pair the Wireless Snooze Remote section. Wireless snooze remote is not paired See How to Connect and Pair the Wireless Snooze Remote section.
Warranty ALTEC LANSING ONE-YEAR LIMITED WARRANTY What Does the Warranty Cover? Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. What Is the Period of Coverage? This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires.
25
www.alteclansing.com Headquarters Europe 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88. 570-296-4434. • Fax 570-296-6887 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg Asia/Pacific 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008 “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
