Instruction Manual_IPC128
Contents: Safety Precautions--------------------------------------------------------------------------------------------------------------------------3 Product Description-------------------------------------------------------------------------------------------------------------------------3 Introduction of the Product----------------------------------------------------------------------------------------------------------------4 Installation for Waterproof Shell--------------------------------------------
Safety Precautions 1. This product is IP65 waterproof and shall not be used in water. 2. The working temperature of the product is 0°C~45°C. 3. Please contact the seller for assistance if there is any problem with the product and do not try to disassemble or repair the product without authority. 4. It is normal that the product body temperature goes up when the product is working. 5. Please do not short-circuit the product. 6.
Introduction of the Product 4
1. Power switch (Please switch on the camera when using it) 2. LED working indicator No. 1 2 3 4 5 6 7 8 9 Status Powered off Powered on Network pairing Connected to network Charging Fully Charged Standby Establish encrypted channel Reset Red Offlight On On Off On Off Off Off On Blue Offlight On Flashing On On Off Off On Flashing 3. IR LEDs for night vision (Max. 5 meters) 4. Camera lens 5. PIR sensor (Max. 5 meters) 6. microSD card slot (2GB~32GB / Class 6 or faster) 7.
Installation for Waterproof Shell Waterproof shell installation: Please install the waterproof shell to prevent rainwater directly spilling onto the device. Rotate the waterproof shell clockwise to the main camera body until it is securely fixed. Note: Please tighten the waterproof shell to the camera body for liquid avoidance. It is against the warranty service if the product did not follow the installation instruction. Fixing the camera on the wall 1.
Charging Please charge the device first before using it. Users could use the computer USB interface or adapter (not included) to charge the device.
battery. The charging time of the USB interface would be longer due to the smaller current. microSD card installation This device supports the use of microSD card to storing video files. The support capacity is 8GB to 32GB. It is recommended to use microSD card with Class 6 or faster. Insert the microSD card into the slot of the device as shown below: Turn on/off the device Off mode: The red and blue light each will flash once during activating while the user switches the power switch to ‘ON’.
Obtaining the App This IP camera supports external devices such as mobile phones that the O/S versions are Android 5.0 or later, and iOS 10.0 or later. The App can be obtained by the following two ways. 1. Download the App from Google Play/Android Market or App Store. (a) Android devices: Please search “TuyaSmart” from Google Play/Android Market. (b) iOS devices: Please search “TuyaSmart” from App Store. 2. Use the external device to scan the following QR codes, available for both Android and iOS system.
l Register an account a) Open the App b) Register c) Users could use mobile phone number or email address to create an account.
d) Users will receive a e) Set a password including f) Create family to add 6-digit code from text or alphabets and numbers. devices. email.
l Wi-Fi Connection Preparation 1. Turn on the camera by setting the power switch at “ON”. The LED working indicator will start flashing which suggests that the camera is ready for network connection. 2. Make sure the external device is connected to a Wi-Fi router. l Methods of adding advice a.) Open the App and click ‘+’ as shown in the picture. b.) Select ‘Security & Sensor’, choose ‘Smart Camera’. 12 c.
d.) Enter the Wi-Fi password; Make sure the product and mobile device are in the same Wi-Fi area. e.) Scan with the camera Press ‘Continue’ The connection only support 2.4 GHz Wi-Fi network, 5GHz is not available. 13 f.) There will be a QR code. Hold the IP camera 15 to 20cm in front of the mobile device for the camera to scan the QR code. When the blue light stop flashing, press the ‘Heard the beep’ for the next step. (As to the camera does not have speaker.) .
g.) Connecting It may take a few seconds. (Please make sure the doorbell, mobile device are in the same Wi-Fi router environment.) h.) Device added successfully Users could check the doorbell through your mobile device. Device name could be edited. 14 i.) Users could see all the connected devices on this page.
Live View 1. Device Name 2. Settings 3. Speaker Turn On/Off 4. Image Quality (HD/SD) Switch 5. Switch to Full Screen 6. Speak (NO FUNCTION) 7. Record the view of camera, video will be saved on mobile device. 8. Screenshot of the video, it will be saved in your mobile device. 9. Playback the video which triggered by motion detection or the App.
How to Playback the Saved Files: a) Choose the device, get into the b) Users could review the videos c) Users could choose the date to live view, press the ‘Playback’ that have filmed by the camera. review videos. (Only available when the microSD card inserted.
Settings l Device Name: Users could modify the device name. l Share Device: Users could share the device to your trusted-one. l Device Information: Users could see the device owner, ID…etc. l Power management setting: Battery capacity, low battery alert setting. l Basic function settings: Flip screen, time watermark for video, speech method. l PIR on/off switch: Users could turn on/off the PIR and set the sensibility of PIR.
How to Check the Alert in the App: a) Choose ‘Me’ c) Users could view the d) Users could view the photo which b) Message Center: Red dot alerts from ‘Alarm’, such taken by the camera when someone means that there is a new as ‘Movement detected’. passes through the camera within alert has not been read. Press the message to view the range of 5 meters. the photo. Video could review from Live view ‘Playback’. (microSD card needed.) 18 ‘Click to view’ is to view in real time.
Specification Type Color CMOS Resolution 2.0MP Viewing angle 100-degree Video format .mp4 (H.264) Frame rate 15fps microSD card 2GB~32GB, Class 6 or faster Audio Input Built-in microphone Wireless Wi-Fi 2.4GHz, IEEE 802.11b/g/n Battery Capacity Approx.
FCC STATEMENTS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
connected. - Consult the dealer or an experienced radio/ TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in mobile/fixed (Min 20cm) exposure condition without restriction.