User's Manual

Keyless Function
LOCK Button
UNLOCK Button
How to confirm the certification marking
The label is attached inside of the cover which is readily removed,
thus FCC ID and CE marking can be easily recognized by users.
■CAUTION■
User's Manual
Product name : KEYLESS TRANSMITTER
Type : TWB1G0084
Lithium battery CR1620
Operating temperatur
e
range
-20~＋60 degree C Keyless
Operation Voltage DC 3.0V
Battery
-CAUTION - Danger of explosion if battery is incorrectly replaced.
Weight
・Give a shock.
・Get it wet. If it got wet, wipe and dry up
・Disassembly and modification.
Operation of frequency 433.92MHz
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference
that may cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Replace only with the same or equivalent type
-CAUTION - Do not exposed to excessive heat such as sunshine, fire or the like.
When the user pushes LOCK, UNLOCK, and the PANIC button of HAND
UNIT, the RF electric wave is output, and TUNER receives it, and an
open lock, the close lock of the door, and the signal of the trunk opening
a
r
e
output
.
Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)
Pay attention to the following.
・It may not be operated when using the equipment of the sam
e
frequency band in the vicinity.
7.8g