Manualshelf

User Manual

ManualsBrandsAlps Electric ManualsElectronicsBluetooth 2.0 + EDR Modular Transmitter
12345
User Guide Information for UGPZ6-C3 v2.0
June 2, 2008
Copyright © 2007 ALPS ELECTRIC CO., LTD.
page1
User Guide Information to 2.4GHz Bluetooth
TM
Module
Model UGPZ6-C3
Caution: This user guide information is only provided to OEM or module installer.
Do not supply to the end user.
1. Introduction:
The Bluetooth Transceiver module, UGPZ6-C3 with Bluetooth
TM
wireless technology is a radio device that
transmits and receives radio signals in accordance with the spectrum regulations for the 2.4 GHz unlicensed
frequency range.
The following table shows a major function.
Model No. Major Function Remarks
UGPZ6-C3
1. Output Power; Bluetooth™ class 2. 2.5mW (+4dBm) Max.
2. External antennas connected via antenna connector.
3. Voltage regulator built in. Rating of Input voltage: +3.3Vdc, +/-0.2V
4. Flash memory (2M bytes) built in
5. Reference oscillator built in
6. Board to board connection through USB interfaces, V2.0
7.Operating temperature: Nominal; +15 °C to +35 °C
8. Regulatory frequency range
USA, Canada, Europe, Taiwan, Korea, China and Japan: 2400 – 2483.5MHz
Electrical features Contents
Program memory 2M bits (256k bytes x 32 bits) Flash memory
RAM 32k bytes x 16 bits
Reference oscillator Built in
Sub clock oscillator Built in
USB interface USB (V2.0) : OHCI and UHCI)
The UGPZ6-C3 is based on Bluetooth specification, Version 2.0 + EDR.
2. Eligibility requirements for regulatory approval:
As a part of regulatory certification, ALPS will provide an approval for certain countries in the form of modular
approval (MA) .
The regulatory approval is required for each country throughout world where the end-user wishes to use
UGPZ6-C3 into entire end product, if no certification program for the modular approval exists in the country.
The countries that can accept MA include the USA, Canada, and certain European countries.
The conditions for approval of UGPZ6-C3 and related information for each country are described below.
ALPS wishes that our customer for end product would contact with us about what module of UGPZ6-C3 has been
certified for each country.

Summary of content (5 pages)