Digital Instant Mobile Photo Printer
Safety Instructions, FCC, etc. CAUTION RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO BATTERY DISPOSAL INSTRUCTIONS. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Safety Instructions, FCC, etc. This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.
Table of Contents Safety Instructions 2 Product Diagram 4 LED Lights 5 Installing and Charging the Battery 6 Installing the Polaroid® Digital Instant ZINK™ Paper 7 Printing: Digital Camera 8 Printing: Camera Cell Phone 9 Troubleshooting 10 About ZINK™ Technology 11 Specifications 12 4
Product Diagram 5
LED Lights 6
Installing and Charging the Battery To install the battery: 1 2 3 Remove battery door cover. Install battery. Replace battery door cover. To charge the battery: 1. Install the battery (see above steps). 2. Connect the AC adapter to the printer and the power source. Notes: • Before using the printer on battery power, fully charge the battery for 3 hours. • The printer is usable while plugged into the power source.
Installing Polaroid® Digital Instant ZINK™ Paper 1 2 Press and release latch on the paper tray door. Unwrap the 10-pack of Polaroid® Digital Instant ZINK™ Photo Paper. 3 4 Slide the 10-pack of Polaroid® Digital Instant ZINK™ Photo Paper into the printer. Make sure the ZINK Smart Sheet™ is placed facedown. Close the printer tray door. Press the POWER button to turn on the printer. The ZINK Smart Sheet™ will automatically eject.
Printing: Digital Camera 1. Connect your digital camera and printer to determine if a print option or printer icon is automatically displayed on the camera screen. 2. If no print icon appears, while the digital camera is in “camera” mode, select “menu” and navigate and confirm that PictBridge is enabled under “settings” or while in “view” mode, select “menu” and navigate to confirm PictBridge is enabled. Note: if “USB” is displayed under “settings” then PictBridge is NOT enabled. 3.
Printing: Camera Cell Phone Passcode: 6000 1. Select the image to print from the stored images on your camera cell phone. In the “options” menu, select “send via Bluetooth.” Select the Polaroid printer and print. 2. If you are unable to print from “send via Bluetooth,” select “connectivity” or “Bluetooth” under the “settings” or “tools” menu. Select the Polaroid printer. Once paired, go back to stored images and select the image you want to print. In the “options” menu, select “beam”.
Troubleshooting PROBLEM The paper jammed while printing (part of the image has already ejected) SOLUTION DO NOT: • Pull out paper. DO: • The paper jammed before printing (nothing has been ejected) Turn power off on printer. Open the paper tray door and remove media. Manually feed the ZINK Smart Sheet™ through the paper feed as far as the paper will go. Turn on printer. The paper jam and ZINK Smart Sheet™ will automatically eject. DO NOT: • Send another image to be printed.
About ZINK™ Technology ZINK™ stands for Zero Ink - a new way to print and experience full color digital images without the need for ink cartridges or ribbons. The ZINK™ Technology encompasses both the ZINK™ Paper and the intelligence embedded in every ZINK™ Enabled device. Over 100 patents and patents pending were generated in the development of this breakthrough technology. ZINK™ Technology is a platform with an endless variety of product and market applications.
Specifications Mobile Printer: Size Weight Battery User Interface AC Adapter Connectivity Print Speed 120mm (4.7”) H X 72mm (2.8”) W X 23.5mm (0.9”) D 8 oz (without paper) includes battery 7.2V rechargeable lithium-ion 15 Prints per charge at 25 C Battery is replaceable 2 Tri-Color LED indicators 9V output Universal Input 100V to 240 VAC Printer will print when pluged into the AC adapter Bluetooth (Class 2) OPP USB 2.