Jeep SUV z 1/14 HCE-TCAM1-WRA Spare Tire Camera & Light System for Jeep Wrangler Installation Manual z Model: Jeep Wrangler (JK) z Model Year: 2007-UP * The specified vehicles have been tested and have met compatibility specifications at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the vehicles listed above. Introductions z Design and specifications are subject to change without notice for improvement.
Spare Tire Camera & Light System for Jeep Wrangler z 2/14 Warning Types of Precautions Indicates actions that are forbidden (must not be performed) Indicates actions that are mandatory (must be performed) Mandatory Forbidden Indicates that disassembly is forbidden. Marks content that should receive your full attention. Forbidden Warning Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock.
Spare Tire Camera & Light System for Jeep Wrangler z 3/14 Warning When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire. When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire.
Spare Tire Camera & Light System for Jeep Wrangler z 4/14 Installation Kit Parts Accessory List Spare Tire Camera & Light Unit Mounting Base Lug Nut Camera Base Mounting Posts (Short, Mid, Long) M4 Hex Socket Cap Screws (8pcs) Camera & Light Extension Cable (7m) Rubber Grommet Installation Manual Warranty Card and Quick Start Guide Camera & Light T-Harness
Spare Tire Camera & Light System for Jeep Wrangler z 5/14 Tools Required Panel Removing Tool Pliers T25 Torx #2 Phillips Screwdriver Wire Cutters Torque Wrench 10 mm Sockets Socket Extension 19 mm Deep Socket
Spare Tire Camera & Light System for Jeep Wrangler z 6/14 Spare Tire Camera and Light Installation Glove Box Removal Removing B-Pillar Panel 1 2 1 Open the glove box. Push inwards both left and right sides to release the glove box out. 2 3 Remove B-Pillar panel by disengaging 4 clips on both front and rear passenger sides. Using panel removing tool, unclip the B-Pillar. Be careful not to damage the panel. Lift the carpet up on both front and rear passenger sides to expose the OEM cables.
Spare Tire Camera & Light System for Jeep Wrangler z 7/14 Spare Tire Camera and Light Installation Removing Rear Right Side Panel 1 2 3 Using 10mm socket to remove the panel. 4 Unclip the cigarette lighter socket from the harness. 5 Remove the Rear Right Side Panel. Using T25 Torx, remove the screws on the rear right side panel. Using panel removing tools, pry off seatbelt cover[#1] and remove the roll cage cover[#2].
Spare Tire Camera & Light System for Jeep Wrangler z 8/14 Spare Tire Camera and Light Installation Spare Tire and Wheel Removal Camera & Light Extension Cable Installation 1 2 1 Using 19mm socket, extract the lug nuts. Remove the spare tire center cap.
Spare Tire Camera & Light System for Jeep Wrangler z 9/14 Spare Tire Camera and Light Installation - Connection Type C – If connecting to all other HU, cut Camera & Light T-Harness and manually connect to each wire located on the passenger’s kick panel, then connect 6pin black connector to gray connector on the Camera & Light Extension Cable. (See page 14 in detail) G. Secure to the factory cables. Connect ACC and GND properly according to the wiring diagram in page 14.
Spare Tire Camera & Light System for Jeep Wrangler Spare Tire Camera and Light Installation OPTION 2: H. Route the wire out of a rear gate vent behind tire carrier. I. Along and through the centric hub.
Spare Tire Camera & Light System for Jeep Wrangler z 11/14 Spare Tire Camera and Light Installation Spare Tire Camera & Light Unit Installation 1 Choose the length of the mounting post (Short, Mid, Long) based on your wheel depth and offset in order to see entire camera view. DEEP MID SHALLOW WHEEL TYPE CROSS SECTION SHORT MID LONG Camera View Camera View Camera View Do not block downward view by wheel or tire. Post Type Long Mid Short Length 4-1/4 inch (108.0mm) 3.0 inch (76.
Spare Tire Camera & Light System for Jeep Wrangler z 12/14 2 Using M4 hex key, assemble the lug nut camera base, mounting post, mounting base with the harness running along the cutout and inside the post. 3 Position the mounting base assembly over the factory lug nuts. Ensure that no wires are pinched or interfered with any parts or safety equipment. Lug nut camera base Mounting base Mounting post 4 Mount the spare tire back on the hub.
Spare Tire Camera & Light System for Jeep Wrangler z 13/14 5 Connect the Spare Tire Camera and Light unit. Completed Installation Image Do not drop Spare Tire Camera & Light unit on hard surface. Doing so could damage the unit. Before replacing spare tire, place floor mat or carpet on the ground underneath the camera to protect Spare Tire Camera & Light unit from dropping. Place floor mat or carpet on the ground underneath the camera to protect Spare Tire Camera & Light unit from dropping.
Spare Tire Camera & Light System for Jeep Wrangler z 14/14 Wiring Diagram Connection Type A Direct Connection Main Harness (Refer to X109-WRA Installation Manual Page 11: Wiring Diagram) MANUAL TRANSMISSION VEHICLES To HCE-TCAM1-WRA Rear View Camera X109D - DVD/Display White/Gray Manual Transmission Reverse Input For manual transmission vehicles ONLY. Connect the White/Gray wire to the White/Gray wire located on the passenger side kick panel.
SPARE TIRE CAMERA & LIGHT SYSTEM HCE-TCAM1-WRA QUICK REFERENCE GUIDE Please read before using this equipment. GUIDE DE REFERENCE RAPIDE Veuillez lire avant d'utiliser cet appareil. GUIA DE REFERENCIA RAPIDA Leala antes de utilizar el equipo. ALPINE ELECTRONICS MARKETING, INC. 1-7 Yukigaya-Otsukamachi, Ota-ku Tokyo 145-0067, Japan Tel. : 03-5499-4531 ALPINE ELECTRONICS OF AUSTRALIA PlY, LTD. ALPINE ELECTRONICS FRANCE S.A.R.L. 161-165 Princess Highway, Hallam Victoria 3803, Australia Tel.
~WARNING ~CAUTION This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or material property damage. WHEN USING A CAMERA SYSTEM, THE DRIVER MUST VISUALLY CHECK ACTUAL CONDITIONS AROUND THE VEHICLE. MAKE SURE THERE ARE NO PERSONS OR ANIMALS IN THE AREA IN WHICH YOU ARE MANOEUVRING OTHERWISE YOU COULD INJURE THEM.
Spare Tire Camera & light System for Jeep Wrangler (2007 -UP) Product Summary /Spare Tire Replace Instructions Product Summary Product Specifications Compatible Vehicle Power Requirements ........... 9V -16V DC Ground Type ........................ Negative ground type Power Consumption ............ less than 0.7W Output Image ....................... Mirror image, VBS (NTSC Color signal system) Output Drive Capacity ......... 75 ohms Image Sensor .......................
Spare Tire Camera & Light System for Jeep Wrangler (2007 -UP) Completed Installation Image /Product Specifications Spare Tire Replace Instructions Lh CAUTION Need extra careful when you replace the spare tire. • Do not drop Spare Tire Camera & Light unit on hard surface. Doing so could damage the unit. • Do not place wheel on the mounting post. 2 Description Torque Spec.
GARANTIE LIMITEE Fidele a son engagement de ne fournir que des produits de qua lite, ALPINE ELECTRONICS OF AMERICA, INC.(« Alpine») est heureuse de vous offrir cette garantie. Nous vous suggerons dele lire attentivement et en entier. Si vous avez Ia moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine aux numeros listes ci-dessous.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. ("Alpine"), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below. • PRODUCTS COVERED: @You must supply proof of your purchase ofthe product. This Warranty covers Car Audio Products and Related Accessories ("the product").