R DVA-5205 DVD/VIDEO CD/ CD PLAYER • OWNER’S MANUAL (Page 2-67) Please read this manual- to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. • MODE D’EMPLOI (Page 72-137) Veuillez lire ce mode d’emploi pour tirer pleinement profit des excellentes performances et fonctions de cet appareil, et conservez-le pour toute référence future.
Precautions Warning This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock.
Precautions Caution This symbol means important instructions. Failure to heed them can result in injury or property damage. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY. When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
Precautions Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on. Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
CONTENTS Precautions Warnings and Cautions ............................... 2 Contents ...................................................... 5 Custom setting – Changing the Closed Caption setting .................... 35 Custom setting – Changing the Ai-NET settings .... 36 Custom setting – Changing the H.U. Control settings ........................ 38 Quick Guide About DVDs ................................................. 6 Discs playable on this DVD player ............... 7 When using remote control ..
About DVDs About DVDs Music CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space. • Multi angle function* (page 20) When the DVD contains a movie shot from multiple angles, the desired angle can be selected from the remote control unit. 1.
Discs playable on this DVD player Discs playable on this DVD player • Playable discs The discs listed below can be played on this DVD player. Other discs cannot be played. Mark (logo) Recorded content Disc size • DVD region number (playable region number) This DVD player will play back any disc whose region number is 1 (or All). DVDs with a region number other than those listed below, cannot be played on this DVD player. Max. playing time 1 One-sided disc Approx. 4 hours 12 cm* Two-sided disc Approx.
When using remote control When using remote control • Changing Switch To operate the DVD Player shift the changing switch to the “DVD” side. Operate while viewing the blue characters on the remote control unit. Replacing the batteries Opening the battery cover Push on the cover and slide it as indicated by the arrows then the cover will be removed. DVD / AUDIO Replacing the battery Switching to “AUDIO” makes it possible to operate Alpine audio products as well.
Loading and unloading discs Loading and unloading discs DVD Video CD CD Turn on the power before loading and unloading discs. (Refer to page 10 “Turning the power on and off”.) Loading discs Press the door in gently then slide it downwards. Close the door. Be sure to close the door to prevent dust from getting inside. POW ER OPEN DVD POW ER OPEN DVD Insert the disc with the side containing words or diagrams facing upwards. Once the disc is partially inserted, it is drawn in automatically.
Turning the power on and off N LD VO Turning the power on and off VO LU P Press “POWER”. The power turns on. POWER NTSC/PAL connected with an Alpine Caution When head unit If the DVA-5205 is connected to anything other than the CVA-1005/ IVA-C800, the default DVD setting must be changed. See page 36, “Custom setting – Changing the AiNET settings” to change the SETUP to CD mode before using it. To turn the power off, press “POWER” again.
Switching between NTSC and PAL configuration Adjusting the volume Switching between NTSC and PAL configuration Adjusting the volume Adjust the volume for connecting only with the Digital Audio Processor (PXAH510). Switch the video output configuration to NTSC or PAL according to the type of television and the disc recording method. Press NTSC/PAL for at least 5 seconds. Move the rotary encoder to the right or left. Turn to the right to increase the volume. Turn to the left to decrease the volume.
Playing discs Playing discs DVD Video CD CD • With some DVDs, certain operations Caution are disabled. Such operations are ENT SOURCE SLOW CHG not possible on such DVDs. • The DVD functions described in this manual are not supported by all DVDs. See the individual DVDs instructions for details on the features supported. • Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.
Stopping playback DVD menu Use the “Joystick” or the number keys (“0” to “9” and ”+10”) to select the desired item, then press “ENT” or “ : ”. 1 2 4 ENT 5 6 8 0 or Press “ L ” during playback. 9 OP/ CL ENT CD Press the stop button during playback to stop playback. That position is stored in the memory. ANGLE 7 DVD Video CD 3 SUB T. ON/OFF.
Fast-forwarding/fast-reversing Finding the beginnings of chapters or tracks Fast-forwarding/ fast-reversing During playback, press “c ” (fastreverse) or “ f ” (fast-forward) for at least 2 seconds. DVD Video CD CD A.PROC DEFEAT SOUR CE or SLO W A. PROC MUTE RPT DEFEAT Press “ : ” to return to normal playback. SOURCE SLOW Notes: • No sound or subtitles are played during fastforwarding/fast-reversing.
Playing still frames (pausing) Frame-by-frame playback Slow motion playback Frame-by-frame playback Note: Some DVDs do not have chapters. Supplementary explanation “Chapters” are divisions of movies or musical selections on DVDs. “Tracks” are divisions of movies or musical selections on video and music CDs. In the pause mode, press “ ”. During playback, press “ ” once. Press “ : ” to resume playback. Video CD CD MUTE MUTE The picture advances by one frame each time the button is pressed.
Searching by title number Searching by title number DVD Use this function to easily find positions on the DVD using the DVD’s title menu. ENT LIST GO TO TITLE SOURCE SLOW During playback, press “GO TO”. LIST GO TO TITLE The mode switches each time the button is pressed. Select “TITLE”. BAND RTN V.OUT TITLE CHAPT TIME Normal playback Input the number of the title you want to play using the number keys (“0” to “9” and “+10”).
Searching directly by chapter or track number Press “ : ” or “ENT”. Playback starts from the selected title number. SOURCE SLOW ENT or Notes: • This function cannot be used on discs on which no chapter numbers are recorded. • Press “CLR” to delete the last digit in the chapter/ track number. Press “CLR” for at least 2 seconds to clear “Chapter” and “Track” numbers. • Press “RTN” to cancel the chapter/track search mode and resume normal playback.
Searching by elapsed time Searching by elapsed time DVD Video CD CD Use this function to search by specifying the elapsed time. During playback, press “GO TO”. ENT LIST GO TO TITLE BAND SOURCE The mode switches each time the button is pressed. Select “TIME”. LIST GO TO TITLE RTN SLOW V.OUT DVD Video RPT DISC TITLE CHAPT TIME Normal playback Video-CD/CD TRACK TIME Normal playback Input the elapsed time from which you want to start playback using the number keys (“0” to “9” and “+10”).
Chapter/track/title repeat playback Switching the audio language Switching the audio language Press “ : ” or “ENT”. Playback starts from the specified elapsed time. SOURCE SLOW ENT or DVD Video CD On DVDs including multiple audio modes or multiple audio languages, the audio language can be switched during playback. During playback, press “AUDIO” for at least 2 seconds. 3 The sound switches between the different audio modes recorded on the disc each time the button is pressed.
Switching the angle Switching the subtitles (subtitle language) Switching the angle DVD With DVDs on which images photographed from multiple angles are recorded, the angle can be switched during playback. ENT DISP MENU SET LIST GO TO TITLE SOURCE SLOW During playback, press 5 “ANGLE” for at least 2 seconds. ANGLE The angle switches between the angles recorded on the disc each time the button is pressed. Notes: • Some time may be required for the angle to change.
Displaying the subtitles Displaying the disc status Displaying the subtitles DVD Displaying the disc status DVD With DVDs on which subtitles are recorded, you can select whether to display the subtitles or not during playback. Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD on the screen. During playback, press “– ON/OFF” for at 2 least 2 seconds. ON/OFF During playback, press DISP. TUNER “DISP.”.
Displaying the disc status Displaying the disc status Video CD CD Use the procedure described below to display the status (track number, etc.) of the currently playing video CD or music CD on the screen. LIST GO TO TITLE BAND RTN UT V.O DISP. TUNER During playback, press DISP. TUNER “DISP.”. The playback status is displayed.
Video output ON/OFF Video output ON/OFF (Only when CVA-1005/IVA-C800 is connected) Note: This output is at a fixed level and requires a preamp with a volume control to adjust listening levels. When this unit is used with the CVA-1005/ IVA-C800 + the TME-M750 (Extra Monitor for Rear Seat), the DVD video can be viewed independently of what’s being viewed on the CVA-1005/IVA-C800. For example, DVD video can be monitored on the Rear Monitor, while a Navigation map is displayed on the CVA1005/IVA-C800.
Changing the default settings (setup) SET UP Changing the language settings Changing the default settings (setup) The factory default settings can be changed to suit your personal preferences and usage. ENT In the stop mode, press “SET” for at least 2 seconds. DISP MENU SET BAND RTN DISP MENU SET The default setting menu appears. UT V.O Note: This operation cannot be performed in the PRE-STOP mode. Use the “Joystick” to make the selection, then press “ENT”.
SET UP Changing the language settings ORIGINAL The disc is played with the audio language set as the priority language for the disc. (AUDIO only) Use the “Joystick” to make the selection, then press “ENT”. ENT ENT AUDIO Set the audio language produced from the speakers. SUBTITLE Set the language of the subtitles displayed on the screen. MENU LANGUAGE Set the language used for the menus (title menu, etc.). The setup screen for the selected language is displayed.
SET UP Changing the TV screen settings Changing the TV screen settings Use the procedure described below to set the output screen according to the type of TV monitor being used. ENT Select “TV SCREEN” under “Changing the default settings (SET UP)” on page 24. DISP MENU SET BAND RTN UT V.O Use the “Joystick” to make the selection, then press “ENT”. ENT ENT 4 : 3 LETTERBOX Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor.
Changing the country code setting 16 : 9 WIDE Select this when connected to a wide screen TV. This is selected upon shipment from the factory. Press “ENT” to reset the country code. SET UP ENT Use keys “0” to “9” to input the 4-digit country code, then press “ENT”. Displays the setting contents. 1 2 3 SUB T. ON/OFF. AUDIO 4 5 6 ANGLE 7 8 9 OP/ CL 0 Notes: • For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc’s jacket.
SET UP Setting the rating level (parental lock) Setting the rating level (parental lock) Use this function to restrict the viewing of movies to children of appropriate age levels only. ENT Select “RATING LEVEL” under “Changing the default settings (SET UP)” on page 24. DISP MENU SET Press “ENT”. The password input mode is set. ENT Use keys “0” to “9” to input the 4digit password. The password is set to 1111 is upon shipment from the factory. 1 2 3 SUB T. ON/OFF.
Setting the rating level (parental lock) Use the “Joystick” to select the rating level, then press “ENT”. Select “OFF” to cancel the parental lock or if you do not want to set a rating level. The higher the number, the higher the rating level. SET UP • Changing the rating level temporarily Tips Some discs may request that you change the rating level set in the default settings during playback.
SET UP Changing the down sampling setting Changing the down sampling setting ENT DISP MENU SET Converts linear PCM (LPCM) voice signals recorded on the DVD disc to downsampling 48 kHz/16 bit digital signals and outputs them from the optical cable. Select “DOWN SAMPLING” under “Changing the default settings (SET UP)” on page 24. Move the “Joystick” up and down to choose ON or OFF and, then press “ENT”.
Changing the down sampling setting SET UP Displays the setting contents. Note: Press “RTN” to return to the previous screen. Press “SET” for at least 2 seconds. The settings are stored and the set up mode is canceled.
SET UP Changing the digital output setting Changing the digital output setting Use the following procedure to set the audio signal output from the DVA-5205. ENT DISP MENU SET Select “DIGITAL OUT” under “Changing the default settings (SET UP)” on page 24. Use the “Joystick” to make the selection, then press “ENT”. ENT ENT AUTO The digital output is switched automatically according to the type of audio signals being played.
Changing the digital output setting Displays the setting contents. Press “SET” for at least 2 seconds. The set up are stored and the set up mode is canceled. SET UP DISP MENU SET Note: Press “RTN” to return to the previous screen.
SET UP Changing the LED indicator setting Changing the LED indicator setting Use the following procedure to set whether or not the product’s LED indicators are on or off. ENT Select “LED INDICATOR” under “Changing the default settings (SET UP)” on page 24. DISP MENU SET BAND RTN Use the “Joystick” to select the “ON” or “OFF”, then press “ENT”. UT V.O ENT ENT ON The LED indicators are lit, indicating the product’s operating status. “ON” is selected upon shipment from the factory.
Custom setting – Changing the Closed Caption Displays the setting contents. SET UP Move the “ Joystick” up and down to select “ON” or “OFF”, then press “ENT”. ENT ENT Note: Press “RTN” to return to the previous screen. Press “SET” for at least 2 seconds. DISP MENU SET The settings are stored and the set up mode is canceled. Custom setting – Changing the Closed Caption setting DVD includes so-called “closed captions” which describe the scene to persons with impaired hearing.
SET UP Custom setting – Changing the Ai-NET settings Custom setting – Changing the Ai-NET settings ENT DISP MENU SET The Ai-NET settings are used to output the sound of connected Ai-NET products. Select “CUSTOM SETUP” under “Changing the default settings (SET UP)” on page 24. Use the “Joystick” to select “AiNET SETUP”, then press “ENT”. ENT ENT Use the “Joystick” to select “DVD” or “CD”, then press “ENT”.
Custom setting – Changing the Ai-NET settings DVD Set to “DVD” when connected to the CVA-1005/ IVA-C800. Operations can be performed using the CVA1005/IVA-C800’s main menu screen. For details, refer to the operating instructions of the CVA-1005/IVA-C800. “DVD” is selected upon shipment from the factory. CD Set to “CD” when connected to an Ai-NET product (head unit) other than the CVA-1005/ IVA-C800. Operations can be performed from the head unit.
SET UP Custom setting – Changing the H.U. CONTROL settings Custom setting – Changing the H.U. CONTROL settings When connecting this equipment with an Ai-NET compatible head unit or an AiNET compatible AV head unit (CVA-1005/ IVA-C800), set the equipment so that it is possible to control from the head unit. ENT DISP MENU SET BAND RTN UT V.O Select “CUSTOM SETUP” under “Changing the default settings (SET UP)” on page 24. Move the “Joystick” up and down to select “H.U. CONTROL”, then press “ENT”.
Custom setting – Changing the H.U. CONTROL settings SET UP ON Possible to operate from an Ai-NET compatible head unit or an Ai-NET compatible AV head unit (CVA-1005/IVAC800). OFF Not possible to operate from an Ai-NET compatible head unit or an Ai-NET compatible AV head unit (CVA-1005/IVAC800). Set to OFF at time of shipment from factory. Displays the setting contents. Note: Press “RTN” to return to the previous screen. Press “SET” for at least 2 seconds.
Operating the digital audio processor (optional) Operating the DVD VideoCDCD digital audio processor (optional) When used with a digital audio processor (PXAH510), operation is possible from the remote control unit included with the DVA-5205. Also refer to the PXA-H510’s operating instructions. ENT BAND RTN UT V.O During playback, press “A.PROC”. V. SEL The setting menu appears. A. PROC BAND Use the “Joystick” to make the selection, then press “ENT”. A.
Adjusting the parametric equalizer Adjusting the parametric equalizer Select “PARAMETRIC-EQ” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select the band to be set, then press “ENT”. The band whose frequency is indicated in yellow can be adjusted. The parametric equalizer’s setting screen consists of two pages. Press “BAND” for at least 2 seconds to switch between pages 1 and 2. ENT ENT Use the “Joystick” to select the band width (Q-FACT), then press “ENT”.
Adjusting the surround settings Adjusting the surround settings This adjustment is not possible when Dolby Digital or Pro Logic is turned on for the DVA5205’s audio output. ENT Select “SURROUND” under “Operating the digital audio processor (optional)” on page 40. BAND RTN UT V.O Use the “Joystick” to select the surround mode, then press “ENT”. There are six surround modes. ENT ENT A. PROC BAND Press “ENT”. The level (LV) value turns yellow.
Storing the surround settings Use the “Joystick” to select the time (echo time), then press “ENT”. ENT Use the “Joystick” to select “WRITE”, then press “ENT”. ENT ENT ENT Use the “Joystick” to adjust the time, then press “ENT”. ENT ENT Use the “Joystick” to select the number at which you want to store the settings (“PRIVATE-MEMORY 1” to “PRIVATE-MEMORY 6”), then press “ENT”. Note: Press “RTN” to return to the previous screen. Press “A.PROC” V.
Recalling the surround settings DVD Recalling the surround settings Video CD Select “PRIVATE-MEMORY” under “Operating the digital audio processor (optional)” on page 40. ENT BAND RTN UT V.O Use the “Joystick” to select the number of the settings you wish to recall (“PRIVATE-MEMORY 1” to “PRIVATE-MEMORY 6”), then press “ENT”. ENT ENT A. PROC BAND Note: Press “RTN” to return to the previous screen. Press “A.PROC” V. SEL to close the digital audio processor screen and return to the playback screen.
Adjusting the time compensation Using the Pro Logic mode DVD Adjusting the time compensation Video CD CD Using the Pro Logic mode DVD Video CD CD Select “TIME-CORRECTION” under “Operating the digital audio processor (optional)” on page 40. Select “DOLBY SURROUND MODE” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select the speaker to be adjusted, then press “ENT”. Use the “Joystick” to make the selection, then press “ENT”.
ADJUST – Setting the speaker mode ADJUST – Setting the speaker mode DVD Video CD CD This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. ENT Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40. BAND RTN UT V.O Use the “Joystick” to select the speaker to be set (“FRONT”, “CENTER” or “REAR”), then press “ENT”. ENT ENT A. PROC BAND Use the “Joystick” to switch the mode.
ADJUST – Adjusting the acoustic image Press “A.PROC” V. SEL to close the digital audio processor screen and return to the playback screen. ADJUST – Adjusting the acoustic image Use the “Joystick” to select the level item, then press “ENT”. A. PROC BAND ENT DVD Video CD CD Use the “Joystick” to adjust the level, then press “ENT”. This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.
ADJUST – Mixing the rear audio channels ADJUST – Mixing the rear audio channels DVD Video CD CD Use this function to mix the audio signals for the front to those output from the rear speakers. ENT BAND RTN Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40. UT V.O Use the “Joystick” to select “REAR MIX”, then press “ENT”. ENT ENT A. PROC BAND Use the “Joystick” to select the mode (“ON” or “OFF”), then press “ENT”.
ADJUST – Center speaker time compensation Use the “Joystick” to adjust the level, then press “ENT”. ENT ENT Note: Press “RTN” to return to the previous screen. Press “A.PROC” V. SEL to close the digital audio processor screen and return to the playback screen. ADJUST – DVD Video CD CD Center speaker time compensation Compensation is not possible when the center speaker is set to “OFF”. Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40.
ADJUST – Rear speaker time compensation ADJUST – DVD Video CD CD Rear speaker time compensation Compensation is not possible when the rear speakers are set to “OFF”. ENT Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40. BAND RTN UT V.O Use the “Joystick” to select “REAR DELAY”, then press “ENT”. ENT ENT A. PROC BAND Use the “Joystick” to adjust the level, then press “ENT”. ENT ENT Note: Press “RTN” to return to the previous screen. Press “A.PROC” V.
ADJUST – Achieving powerful sound at low volumes ADJUST – DVD Video CD Achieving powerful sound at low volumes CD This setting is only possible with Dolby Digital outputs. Press “A.PROC” V. SEL to close the digital audio processor screen and return to the playback screen. A. PROC BAND Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select “LISTENING”, then press “ENT”. ENT ENT Use the “Joystick” to select the mode.
ADJUST – Adjusting the speaker level ADJUST – Adjusting the speaker level DVD Video CD CD Select “ADJUST” under “Operating the digital audio processor (optional)” on page 40. ENT BAND RTN UT V.O Press “BAND” for at least 2 seconds to switch the “ADJUST” screen. V. SEL A. PROC BAND A. PROC BAND Use the “Joystick” to select “TEST TONE”, then press “ENT”. ENT ENT Use the “Joystick” to select “ON”, then press “ENT”. Test tones are produced for two seconds from each speaker.
MODE – Adjusting the volume, fader and balance Use the “Joystick” to select the speaker, then press “ENT”. Adjust so that the volume level from the different speakers is the same. MODE – DVD Video CD Adjusting the volume, fader and balance CD When a head unit is connected using Ai-NET connections, adjust the volume, fader and balance from the head unit. ENT ENT Use the “Joystick” to adjust the level, then press “ENT”.
MODE – Adjusting the subwoofer MODE – Adjusting the subwoofer DVD Video CD CD Select “MODE” under “Operating the digital audio processor (optional)” on page 40. ENT BAND RTN UT V.O Use the “Joystick” to select “SUBW”, then press “ENT”. ENT ENT A. PROC BAND Use the “Joystick” to select the mode (“ON” or “OFF”), then press “ENT”. ENT ENT Note: The subwoofer cannot be adjusted when set to “OFF”. Use the “Joystick” to select the level item, then press “ENT”.
MODE – Turning the defeat function on and off Use the “Joystick” to adjust the level, then press “ENT”. ENT ENT Note: Press “RTN” to return to the previous screen. Press “A.PROC” V. SEL to close the digital audio processor screen and return to the playback screen. MODE – DVD Video CD CD Turning the defeat function on and off Select “MODE” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select “DEFEAT”, then press “ENT”. ENT ENT A.
Operating from the head unit CDA-7965 (head unit) DVA-5205 (player) Operating from the head unit The DVA-5205 can also be operated from the head unit. This section describes operations from the CDA-7965 (the recommended head unit). Note that some of the functions cannot be operated from the DVA-5205. Playing DVDs, video CDs and CDs Press “SOURCE” and select the CD (DVA-5205) mode. The mode switches each time the button is pressed.
Operating from the head unit Displaying the CD title Press “TITLE” to display the CD title, etc., on the head unit’s display. Press “TITLE” on the head unit. The display pattern changes each time the button is pressed. Operation display (CDA-7965) TRACK NO./TIME*1 Clock display mode Text display mode Text display mode Title display mode Clock display Disc Name display*2 Track Name display*2 Title display*3 Notes: *1In the TRACK NO./TIME display mode the time display shows 0:00 and does not move.
Operating from the head unit’s remote control unit Operating from the head unit’s remote control unit The DVA-5205 can be operated from the remote control unit included with the head unit.
Operating from the head unit’s remote control unit ENT ENT ENT A.SEL SOURCE AUDIO SEL RUE-4185 RUE-4160 MENU RUE-4165 RUE-4165 Operating DVDs, video CDs and CDs First see “Remote control operations” (page 58). 1 Press “SOURCE” , “AUDIO SEL” or “A. SEL”to set the CD (DVA-5205) mode. The DVA-5205’s power is on when the CD mode is selected, off when other modes are selected. 2 To set the pause mode, press “ 3 Press and hold “c” or “f” continuously to make FF or RW operation.
Terminology Terminology Dolby Digital (AC-3) DTS Dolby Digital (AC-3) is a digital audio compression technology developed by Dolby Laboratories. It is compatible with not only stereo (2-channel) sound, but also 5.1-channel surround sound. The signals for the different channels are completely independent, so large quantities of audio data can be recorded efficiently on discs, and since the sound is digital there is little loss of sound quality.
List of language codes List of language codes (For details, see page 25.
List of language codes List of language codes (Continued) (For details, see page 25.
List of country codes List of country codes Abbreviation AD AE AF AG AI AL AM AN AO AQ AR AS AT AU AW AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW BY BZ CA CC CD Code 6568 6569 6570 6571 6573 6576 6577 6578 6579 6581 6582 6583 6584 6585 6587 6590 6665 6666 6668 6669 6670 6671 6672 6673 6674 6677 6678 6679 6682 6683 6684 6686 6687 6689 6690 6765 6767 6768 CF CG CH CI CK 6770 6771 6772 6773 6775 Country Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherl
List of country codes List of country codes (Continued) 64 Abbreviation GS Code 7183 GT GU GW GY HK HM 7184 7185 7187 7189 7275 7277 HN HR HT HU ID IE IL IN IO 7278 7282 7284 7285 7368 7369 7376 7378 7379 IQ IR IS IT JM JO JP KE KG KH KI KM KN KP 7381 7382 7383 7384 7477 7479 7480 7569 7571 7572 7573 7577 7578 7580 KR KW KY KZ LA 7582 7587 7589 7590 7665 LB LC LI LK LR 7666 7667 7673 7675 7682 Country South Georgia and the South Sandwich Islands Guatemala Guam Guinea-Bissau Guyana Hong Kong H
List of country codes List of country codes (Continued) Abbreviation PH PK PL PM PN PR PT PW PY QA RE RO RU RW SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH Code 8072 8075 8076 8077 8078 8082 8084 8087 8089 8165 8269 8279 8285 8287 8365 8366 8367 8368 8369 8371 8372 8373 8374 8375 8376 8377 8378 8379 8382 8384 8386 8389 8390 8467 8468 8470 8471 8472 Country Abbreviation Philippines TJ Pakistan TK Poland TM Saint Pierre and Miquelon TN Pitcairn TO Puerto Rico TP Portugal TR Palau
In case of difficulty • If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the power off then back on. Alternatively, try the following methods in the order listed until the DVA-5205 returns to normal playbak mode: 1) Change the source from DVD to another source then return to DVD mode. 2) Turn the car’s ignition OFF and back ON again. 3) Press the RESET button on the face of the DVA-5205.
Specifications Signal system .................................... NTSC/PAL Horizontal resolution ......................... 500 lines or greater Video output level .............................. 1Vp-p (75 ohms) Video S/N ratio .................................. DVD: 60 dB Audio S/ N ratio DVD: 95 dB CD: 93 dB Frequency response .........................
Functions of remote control unit buttons Operating the DVA-5205 DVD Video Player When operating the DVA-5205 set the DVD/AUDIO switch to the “DVD” side. VOL UP L DN VO 1 2 q ENT 3 4 DISP MENU SET 5 SOURCE LIST GO TO TITLE BAND RTN SLOW V.OUT A. PROC DEFEAT r DISP. TUNER RPT DISC ; 68 y V. SEL POWER A. PROC BAND NTSC/PAL o CHG t 8 9 p u i e MUTE 6 7 w 1 2 3 a SUB T.
Functions of remote control unit buttons 9 RPT Button Repeat playback. p POWER Button Turns the power ON and OFF. NTSC/PAL Button Press for at least 5 seconds to change between NTSC and PAL. q DVD/AUDIO Switch Used to switch between DVD and Audio operation. w GO TO Button Used to go directly to start of selection. TITLE Button Press for at least 2 seconds to display the Title Menu. e RTN Button Used to return the selection screen just prior to the present screen. V.
Functions of remote control unit buttons Operating audio for the Alpine Ai-NET When operating audio for the Alpine Ai-NET, set the DVD/AUDIO switch to the “AUDIO” side. VOL UP L DN VO 1 2 q ENT 3 4 DISP MENU SET 5 SOURCE LIST GO TO TITLE BAND RTN SLOW V.OUT A. PROC DEFEAT r DISP. TUNER RPT DISC ; y V. SEL POWER A. PROC BAND NTSC/PAL o CHG t 8 9 p u i e MUTE 6 7 w 1 2 3 a SUB T.
Memo 71
R SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE: Alpine Electronics, Inc. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 Alpine Electronics of America, Inc. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) Alpine Electronics of Canada, Inc. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) Alpine Electronics of Australia Pty. Ltd.