R EN DHA-S680 DVD/VIDEO CD/CD Changer FR • OWNER'S MANUAL Please read before using this equipment. ES • MODE D'EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. DIGITAL VIDEO ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
ENGLISH Contents Operating Instructions Precautions WARNING .................................................. 2 CAUTION ................................................... 3 PRECAUTIONS ......................................... 4 Before Operation About DVDs ..................................................................... 5 Discs playable on this DVD changer ................................ 6 When using remote control .............................................. 7 Replacing the batteries ..........
Precautions WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions.
CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. CAUTION CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM (Rear side of player) ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring.
Precautions PRECAUTIONS Damaged Disc Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on. Do not attempt to play cracked, warped, or otherwise damaged discs. Playing a bad disc could severely damage the playback mechanism. Proper Handling Storage Handle your disc as shown. Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface.
Before Operation About DVDs Music CDs and DVDs have grooves (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read by a laser beam to play the disc. On DVDs, the density of the tracks and pits is twice that of CDs, so DVDs can contain more data in less space. CDs Moreover, DVDs offer a variety of functions. • Multiple audio* (page 17) Movies can be recorded in up to eight languages.
Before Operation Discs playable on this DVD changer • Playable discs The discs listed below can be played on this DVD changer. Mark (logo) Recorded content Disc size Max. playing time One-sided disc Approx. 4 hours 12 cm* Two-sided disc Approx. 8 hours Audio + Video (Moving pictures) DVD Video One-sided disc Approx. 80 Minutes Two-sided disc Approx. 160 Minutes Video CD DIGITAL VIDEO 12 cm Approx. 74 Minutes DVD-ROMs, DVD-R/DVD-RAMs, CD-ROMs, photo CDs, etc.
* Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. * “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, inc. Replacing the batteries 1 Opening the battery cover Push on the cover and slide it as indicated by the arrows then the cover will be removed.
Before Operation 3 Handling the magazine Grasp the handle on the door and slide fully to the right until the door locks. Turn the power on before loading and unloading discs. (See “Turning the power on and off” on page 10.) Loading discs 1 Pull the tray lever with your finger and draw the disc tray out of the magazine. Be careful not to drop the disc. Magazine Tray lever INS ER T IN Sliding door 4 THI S DIR EC TIO N Check for proper orientation of the magazine (top/bottom and front/back).
Removing discs 1 Grasp the handle on the door and slide fully to the right until the door locks. Sliding door 2 Press the eject button to eject the magazine, then remove the magazine. Eject button INS ERT IN Cautions on using the magazine • The CD magazines or accessories included with the CD changer cannot be used with this product. • Disc trays for the CD changer magazines cannot be used with this product's magazine. Although these trays will fit, using them may damage this product.
Quick Guide 1 VOL UP L DN VO ENT Set the head unit’s source to DVD Changer or CD Changer. The power turns on. NOTE The head unit’s sources vary depending on the head unit connected, system components and Ai-NET setting of DHA-S680. 2 DISP. TUNER RPT DISC DISC DN DISC UP To turn the power off, change the head unit’s source.
Switching between NTSC and PAL configuration Adjusting the volume Adjust the volume when using with a Digital Audio Processor (PXA-H510/PXA-H900). Switch the video output configuration to NTSC or PAL according to the type of television and the disc recording method. 1 1 Press and hold the NTSC/PAL button for at least 5 seconds.
Quick Guide 1 ENT LIST GO TO TITLE DISP MENU SET SOURCE SLOW A. PROC CHG DEFEAT Playing discs 0 9 UP +10 DVD Video CD NOTES • During play, the front panel indicators of this unit flash. Playing a DVD: The DVD VIDEO indicator flashes Playing a video CD: The VIDEO CD indicator flashes Playing a CD: The AUDIO CD indicator flashes • The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.
Stopping playback DVD Video CD CD Press the stop button during playback to stop playback. That position is stored in the memory. 1 Fast-forwarding/ fast-reversing 1 Press the L button during playback. 2 • Using the PRE-STOP function (DVD, Tips Video CD only) When the PRE-STOP function is used, the position at which playback is stopped is stored in the memory, and playback resumes from that position. DVD Video CD CD During playback, press and hold the .;; (fastreverse) or ::.
Quick Guide Playing still frames (pausing) 1 2 ENT DISP MENU SET LIST GO TO TITLE RTN MUTE SLOW DN CLR A. PROC DEFEAT 0 Finding the beginnings of chapters or tracks 1 Press the : CD button once. button to resume playback. NOTES • No sound is played during the still frame mode. • Playback starts automatically if the picture is in still mode (paused) for more than 5 minutes. The picture or sound may be interrupted for an instant, but this is not a failure. BAND V.
Convenient Functions Searching by title number DVD Use this function to easily find positions on the DVD using the DVD’s title menu. 1 During playback, press the GO TO button. The mode switches each time the button is pressed. Select “TITLE”. Searching directly by chapter or track number DVD Video CD CD Use this function to easily move to the beginnings of the chapters or tracks on the disc. 1 During playback, press the GO TO button. The mode switches each time the button is pressed.
Convenient Functions NOTES • To input the elapsed time, the “+10” key is not used. Use the number keys “0” to “9”. • Press the CLR button to delete the last digit in the elapsed time. Press the CLR button for at least 2 seconds to erase all the set times. • Press the RTN button to cancel the elapsed time search mode and resume normal playback. • With DVDs, the precision of the elapsed time search function differs from disc to disc.
Switching the audio tracks DVD Video CD DVDs can have up to 8 different audio tracks. These alternate tracks can be switched during playback. 1 During playback, press and hold the AUDIO button for at least 2 seconds. The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed. NOTES • The alternate track selected becomes the default setting every time the power is turned on or the disc is replaced.
Convenient Functions Displaying the subtitles With DVDs on which subtitles are recorded, you can select whether to display the subtitles or not during playback. ENT DISP MENU SET SOURCE SLOW LIST GO TO TITLE 2 ON/OFF 1 SUB T. DISP. TUNER 0 9 During playback, press and hold the – ON/OFF button for at least 2 seconds. The currently displayed subtitles are turned on and off each time the button is pressed.
Displaying the disc status DVD Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD on the screen. 1 During playback, press the DISP. button. The playback status is displayed. 1 During playback, press the DISP. button. The playback status is displayed.
Convenient Functions 5 After using this function, press and hold the V.OUT button for at least 2 seconds to cancel the video output mode.
Default Settings (SET UP) Changing the language settings The setup screen for the selected language is displayed. The audio language, subtitle language and menu language can be set according to your preferences. AUDIO (audio languages) NOTE When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected.
Default Settings (SET UP) 3 Use the Joystick to make the selection, then press the ENT button. ENT DISP MENU SET BAND RTN V.OUT DN CLR 4 : 3 LETTERBOX CHG 0 9 Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen. The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie.
NOTES • For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc’s jacket.) • Press the RTN button to return to the previous screen. 4 4 Press and hold the SET button for at least 2 seconds. The settings are stored and the set up mode is canceled. US : 8583 Changing the country code setting NOTES • For the country codes, refer to “List of country codes” (Page 60). • Can be erased one digit at a time each time the CLR button is pressed.
Default Settings (SET UP) 3 Press the ENT button. The password input mode is set. ENT DISP MENU SET BAND RTN V.OUT 4 CHG 0 9 Use keys “0” to “9” to input the 4-digit password. The default password is 1111 upon shipment from the factory. Setting the rating level (parental lock) Use this function to restrict the viewing of movies to children of appropriate age levels only. NOTE When the settings are changed, the old settings are overwritten.
6 Use the Joystick to select the rating level, then press the ENT button. Select “OFF” to cancel the parental lock or if you do not want to set a rating level. The higher the number, the higher the rating level. NOTE Press the RTN button to return to the previous screen. 7 Tips • Changing the rating level temporarily Some discs may request that you change the rating level set in the default settings during playback.
Default Settings (SET UP) 3 ON ENT DISP MENU SET Move the Joystick up and down to choose “ON” or “OFF” and, then press the ENT button. The digital signals recorded on the DVD disc with 96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/ 24bit, 48 kHz/20bit sampling are converted into digital signals with 48 kHz/16bits sampling for output from the optical cable. Set to ON at time of shipment from factory. BAND RTN V.
Changing the digital output setting Use the following procedure to set the digital audio signal output from the DHA-S680. 2 3 NOTE When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected. 1 Use the Joystick to select “DIGITAL OUT”, then press the ENT button. Use the Joystick to make the selection, then press the ENT button.
Default Settings (SET UP) 3 Use the Joystick to select the “ON” or “OFF”, then press the ENT button. ON The LED indicators are lit, indicating the product’s operating status. “ON” is selected upon shipment from the factory. ENT DISP MENU SET BAND RTN V.OUT OFF The LED indicators are turned off. When “OFF” is set, the indicators do not light even when the power is on. CHG NOTE Press the RTN button to return to the previous screen.
Custom setting – Changing the Closed Caption setting 4 Move the Joystick up and down to select “ON” or “OFF”, then press the ENT button. DVD includes so-called “closed captions” which describe the scene to persons with impaired hearing. It is possible to turn the closed captions ON and OFF. NOTE When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected.
Default Settings (SET UP) 4 Use the Joystick to select “DVD-CHG” or “CDCHG”, then press the ENT button. ENT DISP MENU SET BAND RTN V.OUT DVD-CHG CHG When connected to an Ai-NET head unit (e.g., CDA-7990, CDA-7977, and CDA-7878) or an AiNET AV head unit (e.g., CVA-1006, CVA-1003, and IVA-C801) that were available after January 2001. DVD-CHG is the factory setting. Custom setting – Changing the AiNET settings CD-CHG 1.
NOTES When the DVD-CHG mode cannot be called at the CVA-1006/CVA-1003/IVA-C801 side • “DVD-CHG” is not displayed on the menu screen at the CVA-1006/CVA-1003/IVA-C801 side The cause of this is that the DHA-S680 Ai-NET setting is “CD-CHG.” Use the following method to change the setting. 1. Press the CVA-1006/CVA-1003/IVA-C801 SOURCE switch and select CD-CHG from the menu. 2. Select “AUX1” with the V.SEL switch. This will display the DHA-S680 screen (when DHA-S680 is connected to AUX1). 3.
Digital Audio Processor (Optional) 3 ENT Use the Joystick to select the band to be set, then press the ENT button. The band whose frequency is indicated in yellow can be adjusted. The parametric equalizer’s setting screen consists of two pages. Press and hold the BAND button for at least 2 seconds to switch between pages 1 and 2. BAND RTN V.OUT A. PROC BAND When used with a digital audio processor (PXAH510/PXA-H900), operation is possible from the remote control unit included with the DHA-S680.
Adjusting the surround settings This adjustment is not possible when Dolby Digital or Pro Logic is turned on for the DHAS680’s audio output. 1 2 3 Storing the surround settings Six kinds of parametric EQ adjustment or setting contents can be memorized. 1 During playback, press the A.PROC button. The setting menu appears. 2 Use the Joystick to select “SURROUND”, then press the ENT button. Use the Joystick to select the surround mode, then press the ENT button. There are six surround modes.
Digital Audio Processor (Optional) Adjusting the time correction (only when connected with PXA-H510) ENT DVD Video CD CD Eliminate time delays resulting from the distance between the listening position and the speakers. 1 BAND RTN V.OUT During playback, press the A.PROC button. The setting menu appears. A. PROC BAND Recalling the surround settings 1 2 3 DVD Video CD 2 CD During playback, press the A.PROC button. The setting menu appears.
Using the Pro Logic mode DVD Video CD CD Switch between the Dolby Digital input and the Pro Logic input. 1 2 3 During playback, press the A.PROC button. The setting menu appears. ADJUST – Setting the speaker mode DVD Video CD CD NOTE This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. 1 During playback, press the A.PROC button. The setting menu appears. Use the Joystick to select “DOLBY SURROUND MODE”, then press the ENT button.
Digital Audio Processor (Optional) 6 Use the Joystick to adjust the level, then press the ENT button. NOTE Press the RTN button to return to the previous screen. ENT 7 BAND RTN Press the A.PROC button to close the digital audio processor screen and return to the playback screen. V.OUT ADJUST – Mixing the rear audio channels A. PROC BAND ADJUST – Adjusting the acoustic image DVD Video CD CD Use this function to mix the audio signals for the front to those output from the rear speakers.
ADJUST – Center speaker time compensation DVD Video CD CD ADJUST – Rear speaker time compensation NOTE Compensation is not possible when the center speaker is set to “OFF”. 1 During playback, press the A.PROC button. The setting menu appears. DVD Video CD CD NOTE Compensation is not possible when the rear speakers are set to “OFF”. 1 During playback, press the A.PROC button. The setting menu appears. FR 2 3 Use the Joystick to select “ADJUST”, then press the ENT button.
Digital Audio Processor (Optional) 5 Press the A.PROC button to close the digital audio processor screen and return to the playback screen. ADJUST – Adjusting the speaker level ENT 1 BAND RTN V.OUT 2 DVD Video CD CD During playback, press the A.PROC button. The setting menu appears. Use the Joystick to select “ADJUST”, then press the ENT button. A.
1 4 During playback, press the A.PROC button. The setting menu appears. Use the Joystick to select the mode (“ON” or “OFF” ), then press the ENT button. NOTE The subwoofer cannot be adjusted when set to “OFF”. 5 6 2 3 Use the Joystick to select “MODE”, then press the ENT button. Use the Joystick to adjust the level, then press the ENT button. NOTE Press the RTN button to return to the previous screen. 7 Use the Joystick to select the item to be adjusted, then press the ENT button.
Other Useful Features SOURCE CDA-7977 (Head unit) Rotary Encoder TITLE Operating from the head unit The DHA-S680 can also be operated from the ALPINE Ai-NET compatible head unit. Refer to the manual of the head unit. Note that some of the functions cannot be operated from the DHA-S680. REPEAT Playing DVDs, video CDs and CDs 1 Changer mode: The power of the DHA-S680 turns ON and playback starts automatically. Other modes: The power of the DHA-S680 turns OFF automatically.
ENT ENT ENT SOURCE A.SEL MENU AUDIO SEL RUE-4187 RUE-4185 RUE-4165 RUE-4160 FR Operating from the head unit’s remote control unit The DHA-S680 can be operated from the remote control unit included with the head unit. Remote control operations Operation Remote Control unit P10 Power on/off ES RUE-4187 RUE-4185 SOURCE SOURCE RUE-4160 A.SEL AUDIO SEL Tilt the joystick in up or down direction.
Installation and Connections Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use. Warning DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Precautions • Be sure to disconnect the cable from the (–) battery post before installing your DHA-S680. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle’s electrical system. • When making connections to the car’s electrical system, be aware of the factory installed components (e.g. on-board computer).
Installation and Connections 4 5 6 When the DHA-S680 is connected with an Alpine Ai-NET products (AV head unit, regular head unit, etc.), it’s system settings (Ai-NET and H.U. Control settings) must be selected. Before finalizing installation, be sure to change the system settings as described on page 48. 3 Mounting the remote control holder • If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box.
1 3 Remove the shipping keys. Three keys are mounted to the DHA-S680’s bottom panel to protect the product during transportation. Be sure to remove these keys before installing the DHA-S680. So as not to lose the keys, store them in the special plastic pouch provided with the DHA-S680 and cover the key holes with the included dust-prevention seals. Change the position of the springs.
Installation and Connections 3 Make X-shaped cuts in the carpet. 4 2 NOTE When installing vertically and using an audio RCA cable, always use an L shaped connector. Using a straight shaped connector could damage the connector and cause a malfunction. Install on top of the carpet using the hexagonal washer faced nuts (M6) 4. Horizontal installation To install vertically, attach to the floor using the hexagonal washer faced self-tapping screws (M5x15) 1.
Connections Cable Color Cable Specifications • Digital Output Terminal (Optical) This terminal is used to connect DHA-S680 to ALPINE digital audio processor (PXA-H510 or PXA-H900). These products include a fiber optic cable that will plug directly into the Digital Output Terminal of the DHA-S680. Yellow • Video Output Connector This connector is used in combination with the video inputs of another video product (AV head unit or TV monitor).
Installation and Connections Changing the System Settings When the DHA-S680 is connected to an Alpine AV head unit or a regular Alpine head unit, its system settings must be made. Be sure to change the system settings before fastening the DHA-S680 in place. • Turning on the power 7 Select “DVD-CHG” or “CD-CHG” using the Joystick, then press the ENT button. Depending on the system components, the DHAS680’s may not turn on. If so, use the procedure described below to turn on the power.
9 Select “ON” or “OFF” using the Joystick, then press the ENT button. Examples of System Upgrades Precautions when Making System Upgrades • • Set to “ON” in the following cases: When the DHA-S680 is connected to an AiNET compatible head unit or an Ai-NET compatible AV head unit. In this case, if set to “OFF” the DHA-S680 cannot be controlled from the head unit, and the sound of external products (CD changer, etc.) cannot be heard. “ON” is set upon shipment from the factory.
Installation and Connections • Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor Remote Control Eye Jack Remote Control Eye DVD Changer DHA-S680 Audio Output Connector Digital Input Terminal (Optical) (Changer) Digital Output Terminal (Optical) Video Output Connector Digital Audio Processor PXA-H510/PXA-H900 (Sold Separately) Head Unit non-compatible Ai-NET (Sold Separately) RCA Extension Cable AUX Video Input Terminal (AUX1) AV-Interface Unit
• Connecting an Ai-NET compatible AV Head Unit (AV Head Units available after January 2001: CVA-1006/CVA-1003/IVA-C801 etc.), and Digital Audio Processor (PXA-H510/PXA-H900) System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
Installation and Connections • Connecting an Ai-NET compatible AV Head Unit (AV Head Units available after January 2001: CVA-1006/CVA-1003/IVA-C801 etc.), DVD Player (DVA-5205) and Digital Audio Processor (PXA-H510/PXA-H900) System Switch Setting of DHA-S680 When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position. The DHA-S680’s system settings must be made after connections are completed.
• Connecting an Ai-NET compatible Head Unit (Head Unit available after January 2001: CDA-7990/CDA-7977/CDA-7878 etc.), Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
Installation and Connections • Connecting an Ai-NET compatible Head Unit (Head Unit available after January 2001: CDA-7990/CDA-7977/CDA-7878 etc.), DVD Player (DVA5205), Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor Monitor TME-M790 etc. (Sold Separately) System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
• Connecting an Ai-NET compatible AV Head Unit (IVA-C800/ CVA-1005), DVD Player (DVA-5205) and Digital Audio Processor (PXA-H510/PXA-H900) System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position EQ/DIV AV Head Unit IVA-C800/CVA-1005 (Sold Separately) Ai-NET Connector AUX Audio Input Terminal (AUX1) Remote Control Output Lead (AUX1) (White/Brown) Ai-NET Cable Setting Item H.U.
Installation and Connections • Precautions when Connecting and Using the DHA-S680 with the Versatile Link Terminal (KCA-410C) When connecting the DHA-S680 with the Versatile Link Terminal (KCA-410C), change the system settings of the DHA-S680 according to the following procedure before connecting the KCA-410C. 1 Make the connections for making the DHA-S680 system settings. NOTE After connecting the DHA-S680 to the KCA-410C, DHA-S680 system setting changes will not be possible.
• Connecting an Ai-NET compatible Head Unit (Head Units available after January 2001, except CDA-7990), DVD Player (DVA-5205), Digital Audio Processor (PXA-H510/PXA-H900) and TV Monitor Monitor TME-M790 etc (Sold Separately) System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position.
Others Terminology Dolby Digital Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1-channel surround sound. The signals for the different channels are completely independent, and since the sound is high quality digital there is no loss of sound quality.
List of language codes (For details, see page 21.
Others List of country codes (For details, see page 23.
Abbreviation PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU RW SA SB SC SD SE SG SH SI Code 8069 8070 8071 8072 8075 8076 8077 8078 8082 8084 8087 8089 8165 8269 8279 8285 8287 8365 8366 8367 8368 8369 8371 8372 8373 Country Abbreviation Peru SJ French Polynesia SK Papua New Guinea SL Philippines SM Pakistan SN Poland SO Saint Pierre and Miquelon SR Pitcairn ST Puerto Rico SV Portugal SY Palau SZ Paraguay TC Qatar TD Reunion TF Romania TG Russian Federation TH Rwanda TJ Saudi Arabia TK Solomon Islands TM
Others In case of difficulty • If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the power off then back on. Alternatively, try the following methods in the order listed until the DHA-S680 returns to normal playback mode: 1) Change the source from DVD to another source then return to DVD mode. 2) Turn the car’s ignition OFF and back ON again. • This guide will help you isolate the problem if the unit is at fault.
Operating the DHA-S680 DVD Video Player When operating the DHA-S680 set the DVD/ AUDIO switch to the “DVD” side. VOL UP L DN VO 1 2 q ENT 3 4 DISP MENU SET 5 SOURCE LIST GO TO TITLE w e BAND RTN SLOW V.OUT A. PROC DEFEAT MUTE r 6 7 8 9 p DISP. TUNER RPT DISC t DISC DN DISC UP 1 A. PROC BAND 2 a 3 SUB T. ON/OFF AUDIO 4 o 5 6 s ANGLE 7 ; y V.
Others Operating audio for the Alpine AiNET When operating audio for the Alpine Ai-NET, set the DVD/AUDIO switch to the “AUDIO” side. VOL UP L DN VO NOTE Some controls may not be possible depending on the audio device being used. 1 2 q ENT 3 4 DISP MENU SET 5 SOURCE LIST GO TO TITLE BAND RTN SLOW A. PROC DEFEAT 7 8 9 p w e V.OUT MUTE r 6 DISP. TUNER RPT DISC CHG t DISC DN DISC UP y V. SEL POWER NTSC/PAL A.