EN 10-INCH ADVANCED NAVI STATION X110 FR 8-INCH ADVANCED NAVI STATION X108U ES 7-INCH ADVANCED NAVI STATION INE-W967HD • OWNER’S MANUAL Please read before using this equipment. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by registering your product now at the following address: www.alpine-usa.com/registration.
For X110/X108U/INE-W967HD For Optional DVE-5300X
ENGLISH Contents Operating Instructions PRECAUTIONS IMPORTANT INFORMATION ........................ 8 WARNING Points to Observe for Safe Usage ........................ 8 WARNING ...................................................... 9 How to Input Characters and Numbers (Keypad) ........................................................... 23 Favorite Function Using the Favorite Function .............................. 24 Editing the Favorite Screen ................................ 24 Registering Items ....
Adjusting the Ring Tone Level ...................... 36 Volume Setting ................................................ 36 Setting Audio Mute On/Off while Backing up ................................................................... 37 Default Sound Settings ................................... 37 About the Crossover ........................................... 37 About Time Correction ...................................... 38 Picture Quality. Setup .........................................
USB Flash drive (Optional) Receiving and Tuning to an Alert ..................... 67 Playback ................................................................ 55 Replay Function .................................................. 67 Repeat Play ........................................................... 55 Parental Lock Function ...................................... 68 Random Play ........................................................ 56 Using Jump Memory and Jump Recall function ..................
Switching the Subtitles (Subtitle Language) .... 77 Info Mode Function ............................................ 77 Switching Display Modes ................................... 77 HDMI Operation Bluetooth Operation Setup Before Using .............................................. 79 About Bluetooth .............................................. 79 About the Hands-free Phone ......................... 79 Before Using Bluetooth ..................................
List of Language Codes ..................................... 104 In Case of Difficulty .......................................... 105 If this Message Appears .................................... 106 Specifications ..................................................... 109 END USER LICENSE AGREEMENT (HERE) ............................................................
Operating Instructions PRECAUTIONS IMPORTANT INFORMATION PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT This product is intended to provide turn by turn instructions to get you to a desired destination. Please make certain that all persons using this navigation system carefully read these precautions and the following instructions fully. • This product is not a substitute for your personal judgment.
WARNING • Operation of the system while driving is dangerous. Users should stop vehicle before operating the software. • Road conditions and regulations take precedence over information contained on the map display: observe actual traffic restrictions and circumstances while driving. • This software is designed for use exclusively in the unit. It cannot and may not be used in conjunction with other hardware. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.
CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience.
CAUTION Alpine accepts no responsibility for lost data, etc., even if data, etc., is lost while using this product. On Handling USB Flash drive • This unit can control a memory storage device that supports the USB Mass Storage Class (MSC) protocol. Playable audio file formats are MP3, WMA, AAC and FLAC. • USB Flash drive function is not guaranteed. Use USB flash drive according to the terms of agreement. Read the USB flash drive Owner’s Manual thoroughly.
Features The screen design used in the Owner’s Manual may differ from the actual screen. Favorite Function Frequently used functions such as the Audio source or Navigation are easily recalled. Register them to the Favorite screen. For details, see “Favorite Function” (page 24). Favorite screen example • Frequently used functions and useful functions can be customized for your convenience. • You can register up to 54 functions. • You cannot register a function more than once.
Switching the Audio Sources Screen to a Dedicated Screen You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the four edges of the screen, or by swiping vertically or horizontally. For details on how to swipe the screen, see “Touch Screen Operation” (page 17). Shortcut Setup Screen (page 19) Dual Screen (page 14) You can set the Sound Setup or Rear Seat Entertainment System. You can switch between the displayed screens on the Dual Screen.
About Dual Screen Dual Screen allows you to display the Navigation and Audio/Visual screens simultaneously. Audio full Screen Touch [ ], or swipe to the right. Touch [ ], or swipe to the left. Touch [ ], or swipe to the right. Touch [ the left. Dual Screen ], or swipe to Navigation full Screen * Touch [ ], or swipe to the left to switch to the Navigation menu screen. For details of navigation operations, refer to “Navigation System OM” in the CD-ROM.
Getting Started Location of Controls For X108U/INE-W967HD MENU/ (Power Off) button Recalls the Menu screen. Press and hold this button for at least 5 seconds to turn the power off. / button Press to seek down/up a station in radio mode or down/up a track, chapter, etc., in other audio/visual sources. RESET switch The system of this unit is reset. (NAVI/NAV) button Recalls the navigation map screen. Press again to switch to Navigation menu screen.
Turning Power On or Off Initial System Start-Up Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations. Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn the ignition key to the ACC or ON position. The system turns on.
Touch Screen Operation Switching Sources You can operate the system by using the touch panel on the screen. Press the • Be sure to touch the onscreen button lightly with the pad of your finger to avoid scratching the display. Switching sources using the Touch operation During audio/visual playback, press the (AUDIO) button repeatedly to switch to the desired source. Touch a button or list item on the screen lightly. • If you touch a button and there is no reaction, remove your finger.
Operating the Function Button on the Audio/ Video Main Screen Using the Function button on the Audio/Visual main screen. Touch [ About Basic Operation for List Screen Basic operations on the Setup list screen and the Search list screen. How to display on the list screen differs depending on the selected item. ] to change to the Function mode. Radio main screen example Function mode Swipe to the right or left to change to the Function mode. To close the Function mode, touch [ ].
About the Shortcut Setup Screen Displaying the Sound Setup screen, or the Shortcut Setup screen of the Rear Seat Entertainment System screen. Touch [ screen. Sound Setup Function Tone Adjustment mode ] or swipe downward in the Audio source BASS ENGINE SQ mode The Sound Setup screen or the Rear Seat Entertainment System Setup Screen is displayed.
Adjusting Bass Level/Treble Level Bass Level and Treble Level can be set for each front seat and for each rear seat by touching [Front] or [Rear]. Setting item: Bass / Treble Setting contents: -14 to +14 (Initial setting: 0) • When the Sound Setup of the Shortcut Setup is selected to “BASS ENGINE SQ,” you cannot perform the set up. • Adjustment cannot be performed when Defeat is set to “On.
Notification List button*1 About the Menu Screen Use to display the Facebook Notification List on the connected smartphone via this unit. (page 28) In the menu screen, you can select the audio source and perform various setups or operations on the unit. Camera button*2 Displays camera images. (page 90) Setup button Press the MENU button. Displays the Setup screen. (page 29) The menu screen is displayed.
About the Indicator Display Opening screen Customization The Indicator Bar at the bottom of the screen displays various types of information, like the current time. You can set a BMP image that is stored on a USB flash drive as the opening screen. This setting requires the following image format, folder name and file name.
How to Input Characters and Numbers (Keypad) The displayed screens and procedures may vary slightly depending on the function used, but the basic input method is the same. Input screen area. Cursor position alteration switch Cancel Keypad mode finishes. (Delete) Returns to the previous character and erases it. Touching here for more than 2 seconds will erase all input characters. Input number is confirmed.
Favorite Function Editing the Favorite Screen You cannot edit the Favorites screen while driving. Using the Favorite Function This unit enables you to recall functions easily by registering frequently used items such as the Audio source, the navigation search function, etc. to the Favorite screen. You can recall any of these items easily. 1 Press the Your vehicle must be parked with the ignition key in the ACC or ON position.
Audio Changing Item Names [Radio]*1 / [USB/iPod] / [iDataLink USB/iPod]*2 / [HDMI] / [Pandora] / [Bluetooth Pandora] / [SiriusXM]*3 or [iDataLink SiriusXM]*2, 3 / [AUX] / [Bluetooth Audio] or [iDataLink Bluetooth Audio]*2 1 Touch the text area of the registered item. *1 You can choose the frequency from Preset 1 - 12, registered into each FM1/FM2/AM band of HD Radio or RBDS.
Changing the Layout Drag and drop the item to the desired location. The item location is changed. • When you move to other pages, switch pages, or when you make a new page and move to another, drag to the end of the screen, and lift your finger after the page changes. Deleting Items When deleting a selected item 1 2 Touch the checkbox at the left of the item you want to delete and place a check ( ) in it. Touch [ ] (Delete). The selected item will be deleted.
Applying Alpine TuneIt App This unit’s sound tuning is programmable from a connected Smartphone. It is also possible to download specific parameters for certain vehicles from Alpine’s TuneIt database stored in the Cloud. Using the Alpine TuneIt App, customized parameters can also be uploaded for others to share and rate. Through this unit, it is also possible to receive and respond to information from Alpine’s Social Network Service (SNS) available through the connected Smartphone.
Displaying Facebook Screen During Notification incoming or Notification List screen, you can switch to Facebook screen. Facebook screen example Message content Poster’s photo Close button: Close the Facebook screen. Touch Poster’s picture or Poster’s name to switch to Facebook screen. The detailed information of Notification is displayed. • Touch [ ] to return to Notifications List screen. • Depending on the status, contents of message and photo may not be displayed.
Setting items: Wireless: See “Wireless (Bluetooth) Setup” (page 30). General: See “General Setup” (page 32). Source: See “Source Setup” (page 42). System: See “System Setup” (page 45). Setup As the X110 is for specialized vehicles, its initial settings differ from the values shown in this manual. Setup Operation To display the Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.