Installation Manual

Installation Manual
This module is to be installed only by the professional line operator and used only with a
Bluetooth Module
for car audio produced by AL
PINE ELECTRONICS, INC.. When this Bluetooth Module is installed in
the Car Audio, we shall consider the following points;
1. Since
G500-8 BT PWB” owns its FCC ID/IC Number, we shall affix an exterior label on the
product if the FCC ID is not visible. The exterior label shall use wording such as either ”Contains
Transmitter Module FCC ID: A269ZUA138 / IC: 700B-G5008” or “Contains FCC ID:
A269ZUA138/ IC: 700B-G5008”.
2. G500-8 BT PWB” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules Part 15
Subpart C. The manual statement 15.19 (a)(3) is included User Guide of the product.
3.
G500-8 BT PWB is to be installed only by the professional line operator as shown in following
pictures. (Fig1, 2, 3, 4 and 5 )
Fig 1. Top View of Bluetooth Transmitter “UGZZC-B###
Fig 2. Reverse View of Display unit that installed Bluetooth Transmitter “UGZZC-B###
Antenna connecter
External Antenna Connector for Bluetooth
Bluetooth antenna
UGZZC-B###

Summary of content (3 pages)