Installation Manual

Installation Manual

This module board is to be installed only by the professional line operator and used only for

car audio produced by ALPINE ELECTRONICS, INC.. When this Bluetooth Module

Board is installed in the Car Audio, we shall consider the following points;

1. Since “IAM2.1 BT PWB US3”owns its FCC ID/IC Number, we shall affix an exterior label on

the outside of the product if the FCC ID is not visible. The exterior label shall use wording such

as either ”Contains Transmitter Module Board FCC ID: A269ZUA134 / IC: 700B-IAM2103” or

“Contains FCC ID: A269ZUA134 / IC: 700B-IAM2103”.

2. “IAM2.1 BT PWB US3” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules

Part 15 Subpart C. The manual statement 15.19 (a)(3) is included User Guide of the product.

3. “IAM2.1 BT PWB US3” is to be installed only by the professional line operator as shown in

following pictures. (Fig 1 and 2)

Fig 1. Front side of “IAM2.1 BT PWB US3”

BT part

PAGE 1
Installation Manual This module board is to be installed only by the professional line operator and used only for car audio produced by ALPINE ELECTRONICS, INC.. When this Bluetooth Module Board is installed in the Car Audio, we shall consider the following points; 1. Since “IAM2.1 BT PWB US3”owns its FCC ID/IC Number, we shall affix an exterior label on the outside of the product if the FCC ID is not visible.
PAGE 2
Installation Manual Fig 2. Front view of “IAM2.1 BT PWB US3” to be equipped for a Car Audio (example) IAM2.1 BT PWB US3 There isn’t an official user manual for this Bluetooth Module Board “IAM2.1 BT PWB US3”. However, user manuals of final product, which have Bluetooth module board, must contain notification corresponding to the following description. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.