Quick Start Guide

ManualsBrandsAlphamax ManualsElectronicsNeTV2

Quickstart Guide

NeT V2

Open Video Development Board

Let’s Bring Open Video to the Digital Age

max

libre video

Alphamax LLC https://alphamaxmedia.com

Equipment name: NeTV2

Model Name: NETV2MVP

Serial Model Name: AMAX-NETV2MVP

Contains FCC ID: 2ABCB-RPI3BP

Summary of content (5 pages)

PAGE 1
NeTV2 Open Video Development Board Let’s Bring Open Video to the Digital Age Quickstart Guide Equipment name: NeTV2 Model Name: NETV2MVP Serial Model Name: AMAX-NETV2MVP max Contains FCC ID: 2ABCB-RPI3BP libre video Alphamax LLC https://alphamaxmedia.
PAGE 2
Using your NeTV2 1. DC power plug 2. Video Output 3. Video Input 12V DC 4. (Optional) USB port for configuring wifi via Keyboard/Mouse 1. Plug in 12V DC adapter into DC power plug. 2. Plug TV into the video output port. Maximum supported TV resolution is 1080p. 3. Plug in a suitable video source (such as a DVD player, set top box, game console or laptop) to the video input port.
PAGE 3
Troubleshooting and FAQ • If the overlay UI looks stable but staticky: unplug the video input and plug it back in to re-synchronize ciphers, and the static should go away. • Update the FPGA firmware by plugging in the keyboard and mouse, connecting to the network, typing control-Q, and double clicking on the “Update FPGA” program icon. The screen will blank for about one minute during the update process; do not shut down the device while this happens.
PAGE 4
Regulatory Statements USA: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.