Data Sheet
Product Specification Sheet APS703 - Rev. 07/2013
C333-2 QwikBUS™ Wiring Harness Connector for SP333 with SNT333 and T1240
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS702) Next (APS704) >
Architects' And Engineers'
Specifications
The Wiring Harness Connector(s) shall be
Alpha Communications® / S.T.R.™ QwikBUS™
C333-2 or equivalent.
The C333-2 shall be used in conjunction with
each SP333 QwikBUS™ controller and its
associated SNT333 powers supply and T1240
transformer.
The C333-2 shall easily plug onto the
polarized connector of the associated SP333
QwikBUS™ controller and shall have pigtail
connectors for the screw terminals on the
SNT333 and T1240.
Contractor shall observe all local and national
electrical and building codes.
C333-2 Connector for SP333 to SNT333 and T1240
The Alpha Communications® / S.T.R.™ C333-2 QwikBUS™ Wiring Harness Connectors
are designed to be used in conjunction with the QwikBUS™ SP333 Intelligent
Controller unit.
The polarized plug end of the C333-2 plugs into the SP333 controller and 2 of the
pigtail wires connect to the DC power on the SNT333 power supply. The other 2
pigtail wires connect to the AC voltage on the T1240 transformer.
This provides the SP333 with the AC and DC power it requires to operate properly.
Features
Polarized plug connects to SP333 controller
Pigtail wires connect to SNT333 and T1240
Color-coded connectors
Specifications
Connectors:
Polarized plug-in connector to connect to the SP333 controller unit.
Four (4) pigtail wires to connect to SNT333 power supply and T1240
transformer.