Data Sheet

Product Specification Sheet APS523 - Rev. 07/2013
APG Series Surface Housings (For modular door stations)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS522) Next (APS524) >
A PG1T (Titanium-shown)
A PG6/2W (White-shown)
APG Series Surface Housings for Modular Series Door
Stations
The APG surface housings are designed to be used with the Alpha
Communications® / S.T.R.™ modular series door entry stations and
system annunciators. There are seven (7) configurations available
in single and double-width varieties.The APG housings are designed
to be used in conjunction with the MT series Modular Frame(s). For
larger configurations, multiple APG housings and MT frames may be
mounted alongside each other. The APG surface housings are
available in three (3) finishes to match the MT frame finishes;
Titanium (suffix-T), White (suffix-W) or Brown (suffix- B).
The APG housings have built-in stand-offs to allow mounting of the
individual modular snap-in component's PC boards, for easy and
neat system wiring.
See chart below for reference of sizes/types and configurations
available.
CONFIGURATIONS AVAILABLE
Model# # of Modules Height Width Depth**
APG1* 1W x 1H 5.67" 5.12" 1.00"
APG2* 1W x 2H 9.60" 5.12" 1.00"
APG3* 1W x 3H 13.55" 5.12" 1.00"
APG4* 1W x 4H 17.50" 5.12" 1.00"
APG4/2* 2W x 2H 9.60" 9.06" 1.00"
APG6/2* 2W x 3H 13.55" 9.06" 1.00"
APG8/2* 2W x 4H 17.50" 9.06" 1.00"
*Titanium (suffix-T), White (suffix-W) or Brown (suffix- B).
**Depth indicates size from front to back of frame only, not
including the APG series housing and/or snap-in module(s)
included.
Architects' And Engineers' Specifications
Surface housing(s) shall be Alpha Communications® / S.T.R.™ APG series or approved equal. Surface housing(s) shall be modular type and
shall be used in conjunction with the proper MT series modular panel frame(s). The APG housing(s) shall contain built-in stand-offs to to
allow mounting of the individual modular snap-in component's PC boards, for easy and neat system wiring.
APG housing(s) shall be made of durable cast aluminum and shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and
shall surface mount onto the finished wall.
Contractor shall observe all local and national electrical and building codes.