Alpha Communications® 42 Central Drive Farmingdale NY 11735-1202 Phone: 631-777-5500 Fax: 631-777-5599 Toll-Free 1-800-666-4800 www.AlphaCommunications.com info@alphacommunications.com Installation and Programming Manual Pro700 Communication System Pro700 Installation and Programming Manual PRO700manual (06/2012) A100K10226/04.00 Jul.
Table of Contents 1 GENERAL SYSTEM DESCRIPTION ................................................ 4 1.1 Typical Pro700 System Users.................................................... 4 1.2 Keypad Features ........................................................................ 5 2 STATIONS AND KITS....................................................................... 6 2.1 Categories .................................................................................. 6 2.2 Master Stations .................
5 CONNECTING STATIONS ..............................................................17 5.1 AA711 .......................................................................................17 5.2 AA702, AB708 and AB709........................................................17 5.3 AA703, AA704, AA705, BC735.................................................18 5.4 AA706, AB731, AB731-F, AB731A, AB731A-F ........................19 5.5 Call Annunciation System – CAS..............................................
1 GENERAL SYSTEM DESCRIPTION z z z z z z z z z z Up to 40 subscribers No central exchange One speech channel One program distribution channel Stations with LCD display Hands-free duplex operation Wide range of standard and programmable features Easy to expand Simple installation - bus, loop and/or star cabling Best price/performance on the market 1.
Clear sound reproduction System Features LCD display, 8 digits Loud-speaking hands-free Soft-speaking confidential Privacy Microphone cut-out Volume down Volume up LED indicator Blank: Free line Red: Busy line Green: In conversation Green flash: Call reply Orange: Privacy or Absence Manual control of speech direction (simplex) Soft-speaking Keypad for digit dialing X-key for cancelling calls T-key for manual speech direction Microphone mute Sensitive microphone Camp on busy / queue feature Call
2 STATIONS AND KITS 2.1 Categories Pro700 stations are divided into two categories: MASTER STATIONS - make calls to any stations by dialing its number - receive calls from any station. Master stations are equipped with a standard 15-button keypad. No extra feature buttons are required. SUBSTATIONS - make calls to a limited number of predetermined call numbers with 1 or 3 direct call buttons - receive calls from any station. 2.
AA703 Industrial Master Station z Loud-speaking hands-free communication z Surface mount, splash-proof station designed for humid, dirty and outdoor conditions z Shock resistant casing in durable Bayblend plastic z The front can be removed to allow easy access during installation and service z Internal 3 Watt amplifier z Speaker volume is adjustable with switches inside the station z The unit is prepared for connection of an external speaker z The 10 Watt power amplifier FC740 can be used
AA706 Clean Room Station z Specially designed for hospital clean rooms z Flush or on-wall mounting in optional back box z Foil front with full numeric keypad including volume, simplex and cancel buttons z Front foil is washable using all common cleaning detergents and chemicals z Front material is antimicrobial treated z Built-in microphone and loudspeaker z Inputs for program distribution, remote emergency call and local reset z Outputs for external loudspeaker, ‘door opening’ and CAS cal
AB731, AB731-F Tamper resistant substation z Robust, vandal proof and dust resistant designed for indoor use - AB731 on-wall mounting - AB731-F flush mounting z Aluminum construction with stainless steel front plate for optimal protection - AB731 2 mm plate - AB731-F 3 mm plate z Optional back box BF934 for flush mounting in concrete etc.
BC735 Multipurpose substation z Multipurpose substation without loudspeaker or microphone z Surface mount, splash-proof housing designed for humid, dirty and outdoor conditions z Shock resistant casing in durable Bayblend plastic z The front can be removed to allow easy access during installation and service z Internal 3 Watt amplifier z Speaker volume is adjustable with switches inside the station z Two external speakers must be added, one used as microphone - alternatively, a separate dyn
HD752 Audio, PA and Radio Interface z General interface for connection of various external audio sources to the Pro700 system - public address - closed radio networks - alarm systems and more. z The unit has one input (RX) for receiving and one for transmitting (TX) audio signals. z Built-in relays control the KEY and ON functions. z All Call can be activated by an external closing contact and use an external audio source as input.
PSDC24-1.3, PSDC24-5 and PSDC24-12 Power Supplies One or more 110 VAC mains power supplies are connected to the common power line in the cabling. - PSDC24-1.3 24 VDC / 1.3A max 5 stations - PSDC24-5 24 VDC / 5A max 20 stations - PSDC24-12 27 VDC / 12A max 40 stations BD702 Station Kit Station designs have sometimes to be adapted to meet local requirements. A station kit is available for local production of Pro700 stations.
3 INSTALLATION 3.1 General Information 3.1.1 Stations Up to 40 stations can be connected in one system. A maximum of 16-20 stations is recommended. 3.1.2 Station connection Desk-top master station AA711 is connected to wall sockets via station cords and RJ45 connector. - Various types are available All other stations are connected with screw terminals inside the station. 3.1.3 Power supply The power supply output voltage must be between 12 and 27 VDC.
Maximum cable length The total cable run in a system is limited by a mutual cable capacitance of max. 87 nF. - Standard quality cable: 120 nF/km max. length: 700m (2100 ft) - High quality cable: 47 nF/km max. length: 1700m (5100 ft) 3.1.5 Cable layout STAR CONFIGURATION All stations are normally connected to the system power supply in parallel. Clusters of stations may have their own local supplies.
4 PROGRAMMING 4.1 General All stations in System Pro700 have two 10 switch DIP-switch packages for system configuration and feature programming. ON 1 2 3 4 5 6 7 8 9 10 Some stations have jumpers for additional programming. U3 A station has to be reset after programming. ; Disconnect the power supply or unplug the station cord. ; Press the reset switch SW1 on stations AA703, AA704, AA705, AA706, AB731, AB731A and BC735.
Pro700 Always Privacy 5 Installation and Programming Manual Dir. Dial Number Range Dir. Dial Number Range 9 10 Receive Doorbell call #2 Alert tone when queue Silent Alarm on key 6 Last no. redial on key 6 7 8 9 10 Receive Silent Alarm Yes Receive Doorbell call #1 6 No No No Yes Yes No No No Yes 3 sec. Single Yes Yes T-key scrolls CAS queue 5 OFF No No Master Slave CAS Operator** ON Yes Yes 30 sec.
5 CONNECTING STATIONS 5.1 AA711 Open the lid on the rear of the station to get access to the programming DIP switches and strap jumpers. E F G AB C D 1 2 3 + 24V - Wall socke t RJ45 Default stra p se tting 1 z 8 front vie w 1 2 3 4 5 6 7 8 The station cords BF640/641/642/ 643 are used to terminate this station to an 8-pin modular jack wall socket, KB170 or KB171. Note that some types of wall sockets on the market do not always have the same connection layout.
1 2 3 4 5 6 7 8 External loudspeaker ; Set jumpers to pos 1 – 2, EXT LS. ; Connect a 20 ohm loudspeaker to terminals 1 and 8. - Remote Output function can then not be used. EXT + 24 V Remote Output Door opening (activated by "5" from a priority station during conversation). 30 m A 1 2 3 EXT LS 1 EXT LS REM CON 2 3 REM CON These stations have a 30mA transistor output. ; Set jumpers to pos 2 – 3, REM CON. - External loudspeaker can then not be connected.
Handset GD745 TB3 1 2 3 4 5 6 Mic Ear GND Cradle PTT Common T An external Handset Module can be connected to perform lowspeaking conversations. ; Connect all wires from the handset module GD745 to the TB3 screw terminal block: - Microphone 1-3 - Ear capsule 2-3 - Cradle switch 4-6 - T-button 5-6 10 Watt amplifier FC740 TB4 1 2 3 + 24VAC/DC POW 4 10W A10 W Amplifier Module can be mounted inside the stations according to separate instructions.
5.5 Call Annunciation System – CAS A Call Annunciation System (CAS) consists of up to 39 Call-in stations reporting to 1-3 Operator stations. TB1 . . 9 10 Remote Output z Calls from Call-in stations can queue up in Operator stations and be attended to one by one. z Call-in stations (typically used in cells, lifts and at doors) are normally door stations and tamper resistant substations, but all types of Pro700 stations may be used. The CAS feature is programmed in each station.
5.6 Adjusting Audio Level 5.6.1 Master stations AA711, AA702, AA704, AA706 ; Use the + and – keypad buttons. 5.6.2 Substations AB708 and AB709 ; Turn the variable resistor R20 on the printed circuit board clockwise to increase volume. ON OFF U4 1 2 ; Use switch package U4 on the printed circuit board. - The output level can be fine tuned by resistor R20. VOLUME high low SW1 S W2 ON ON OFF ON ON O FF O FF O FF 5.6.3 Industrial stations AA703 and AA705 Multipurpose Unit BC735 LE VEL 4 3 2 1 5.
6 TYPICAL CONFIGURATIONS The following configurations are just a few examples on how to connect and program Pro700. More examples are found in the Pro700 Configuration sheets 15 911 003 … at www.zenitel.biz/pro700 6.1 Police Station, Guard – Cell Communication AB731 30 AB731 31 z Stations AB731 are located inside cells. z The relay in station no. 30 can open the cell door. - The door opening relay is operated from station no.10 by pressing the “5” button during conversation with no.30.
6.2 Police Station Door – Guard – Cell communication AB731A One AB731 station is located inside a cell. z Two AB731A stations are located outside two entrance doors. - Door station no. 30 has a relay for remote door opening. - Door station no. 31 must be opened manually by a guard. z The relay in no. 30 is operated from guard station no. 10, 11 or 12 by pressing the “5” button during conversation with no.30. z Station no.
6.3 Police Station, Remote radio control RADIO HD752 z Stations no. 10, 11, 12 and 13 can call each other by normal dialing. z The station’s program channel cable is connected to the RX line from the radio. - The officer on duty can leave the radio room and move freely in locations with intercom stations. By dialing “96” (program channel) from any station he can monitor all ongoing radio traffic.
6.4 Supermarket AA711 z All stations are programmed as direct dialing 10-key stations. z All stations are programmed with priority. z The cashier stations are programmed to direct dial no. 20 - 28. z Stations no. 20 - 28 are programmed to direct dial no. 10 - 18. z Emergency call can be made by all stations on button “9”.
6.5 Small Industry z Doorbell station no. 30 can make a call to station no. 12 and 13. - Station no. 12 and 13 can accept the call by button “5”. - Station no. 12 and 13 can open the door by button “5” in conversation. z Station no. 10, 11 and 12 have external loudspeaker for increased output. z Station no. 11 and 13 have optional warning (cancelled by pressing “2”). - Station no. 11 has a light or bell to alert a call in noisy environment - Station no.
7 TECHNICAL SPECIFICATIONS System Pro700 Number of stations Max recommended 40 16 - 20 Extension call numbers 10-49 Conversation channels 1 Program distribution channels Input to program channel aux. line 1 100 mV / 600 ohm Power supply Line specification 18 VDC (12–27) 0.5 or 0.6 mmØ 3 twisted pairs Max. distance between power supply and a station, Ø 0.6 mm cable 12 VDC 100 m (330 ft) 18 VDC 300 m (1000 ft) 24 VDC 500 m (1600 ft) Total cable capacitance max. Max.
