Data Sheet

Product Specification Sheet APS754 - Rev. 07/2013
Stadio Series Double-Wide Call Pushbutton Modules (Golmar)Stadio Series Double-Wide Call Pushbutton Modules (Golmar)
387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]
Web: www.canalalarm.comWeb: www.canalalarm.com
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
3210/A L
10 C a ll Button Mod e l Sho wn
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
The Double-Wire Call Button Module(s) shall be Alpha
Communications® / Golmar Stadio Series, or approved equal.
Module(s) shall be made of 1.8mm thick anodized aluminum and
shall feature metal call pushbuttons on the right and left side of
each module, and built-in protected double nameholder module(s).
Module(s) shall snap together as required to provide the
appropriate number of call pushbuttons needed for each door entry
station.
Contractor shall observe all local and national electrical and
building codes.
Stadio Series Double-Wide Call Button ModulesStadio Series Double-Wide Call Button Modules
The Alpha Communications® / Golmar Stadio Series Double-Wide
Call Button Modules are used when space is limited and you need
to have a maximum amount of call buttons in as small a space as
possible.
Made of 1.8mm thick anodized aluminum, these modules feature
metal call pushbuttons on the right and left side of each module,
and built-in protected double nameholder module(s).
These modules are also used with the model 600/AL closing heads
(end caps) for the Stadio series panels.
FeaturesFeatures
Rugged 1.8mm thick anodized aluminum
Built-in metal call pushbuttons
Built-in protected double nameholder module(s)
SpecificationsSpecifications
Dimensions:
5.30"W (135mm)
4.57"H (117mm)
End Caps Required:
Model 600/AL. Also known as
'closing heads', used on the top and
bottom module(s) when the panels are
assembled.
Models AvailableModels Available
3220/AL: 2 Pushbuttons (1 row high)
3240/AL: 4 Pushbuttons (2 rows high)
3260/AL: 6 Pushbuttons (3 rows high)
3280/AL: 8 Pushbuttons (4 rows high)
3210/AL: 10 Pushbuttons (5 rows high)