User Guide

Quick start
Quick start
Step 2: Reg�ster your account �n the
app or s�gn �n w�th Google or Apple.
Quick start
Quick start Quick start
User manual
Q: V�deos are hazy or sl�ghtly blacked.
A: Please remove protect�ve f�lm.
Q: Can’t connect the camera.
A: Make sure that your W�F�
network has DHCP server.
The camera doesn’t work w�th publ�c
network or network w�th web
authent�cat�on l�ke �n a�rports or hotels
Reset the camera and try to setup aga�n
us�ng the USB cable, then connect �t
�nto a wall.
FAQ
FAQ
Our customer support phone:
929 552 1361 text
Scan QR by your phone
and watch video tutorials
www.alpha-technics.com
Step 0: Install the app “Tuya Smart”
from AppStore (�OS) or Play Store
(Andro�d).
Quick start
Step 1: Do not �nstall the SD card.
Plug the camera �nto a wall or
connect �t to a power bank.
Step 4: Press “Add Dev�ce”
Step 5: Cl�ck: Add Manually->Secur�ty
& V�deo Surv -> Smart Camera (W�-F�)
Quick start Quick start
Get 24/7 support by ema�l
support@alpha-techn�cs.com
REGISTER YOUR PRODUCT
GET 2 YEAR
EXTENDED WARRANTY
AND BONUS
use the l�nk below
www.alpha-techn�cs.com/warranty
Warranty
Step 3: Allow not�f�cat�ons,
bluetooth and locat�on for setup.
Th�s needed to f�nd your w�f� router.
Press allow to use bluetooth and
allow to use your locat�on
wh�le us�ng app.
The app needs �t to f�nd your W�F�
router.
Reset the camera before setup:
1.Connect the camera us�ng USB
USB cable to a charger.
2.Wa�t for 5 m�nutes, press and hold
the reset button unt�l l�ghts go off.
Your camera should be connected to a charger
dur�ng the reset.
3.Wa�t 2 m�nutes and plug �nto a wall.
Wa�t for 5 m�n, then setup the camera.
You should see a dev�ce “SmartL�fe” �n a
W�F� l�st on your phone.
Do not connect �t r�ght now, follow qu�ck start.
iQCharger
Wireless
Notices:
Remove a protective film before use,
note: the protective film is very thin
Step 6: Cl�ck on the R�ght Top
QR Code and select AP mode
Cl�ck checkbox and then cl�ck Next
Step 7: Select your 2.4G W�F�
network and type password, cl�ck next.
Step 8: Open W�F� sett�ng and select
a dev�ce “SmartL�fe”, sw�tch back to app
Step 8: Cl�ck “Conf�rm hot spot
connect�on, next” �f you get the same
button.
If you camera �s connect�ng, and
you don’t get th�s �nformat�on
please wa�t for connect�on.
The camera doesn't make a prompt tone!