Manual Model Number : WMC-AC01 Wireless AC Module Revision: 1.0 This document contains confidential proprietary information and is the property of Alpha Networks Inc.. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Inc..
Contents 1.0 SCOPE ........................................................................................................................................................................... 3 1.1 DOCUMENT ................................................................................................................................................................. 3 1.2 PRODUCT FEATURES .........................................................................................................................
1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11ac PCI Express. This PCI Express card is based on BCM chip that complied with IEEE 802.11ac from 5GHz, and it is also backward compatible to comply with IEEE 802.11a and IEEE 802.11n standard. 1.2 Product Features Compatible with IEEE 802.11a high rate standard to provide wireless 54Mbps data rate Compatible with IEEE 802.11n draft standard to provide wireless 300Mbps data rate Compatible with IEEE 802.
2.2 General Requirements 2.2.1 IEEE 802.11a Section Feature Detailed Description y y 2.2.1.3 Standard Radio and Modulation Schemes Operating Frequency 2.2.1.4 Channel Numbers 2.2.1.5 2.2.1.6 2.2.1.7 Data Rate Media Access Protocol Transmitter Output Power y y y y y y 2.2.1.1 2.2.1.2 y y y y y y y y y y IEEE 802.11a BPSK, QPSK, 16QAM, 64QAM, with OFDM 5150~5350MHz, 5470~ 5600MHz & 5650MHz ~ 5725MHz, 5725MHz~5850MHz 17 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 7 for 802.11n (HT40), 802.
Feature 2.2.2.7 Detailed Description Transmitter Output Power y y y y y y y y y y Frequency 5150~5350MHz, 5470~ 5600MHz & 5650MHz ~ 5725MHz 802.11a: 145.719mW 802.11n (HT20): 159.813mW 802.11n (HT40): 240.954mW 802.11ac (VHT80): 144.825mW Frequency 5745~5825MHz 802.11a: 499.224mW 802.11n (HT20): 497.682mW 802.11n (HT40): 780.691mW 802.11ac (VHT80): 260.749mW Note: The maximum RF output power setting is different by channel and individual country regulations. 2.2.2.
2.2.3 IEEE 802.11ac Section # Feature Detailed Description 2.2.3.1 2.2.3.2 y y 2.2. 3.3 Standard Radio and Modulation Schemes Operating Frequency 2.2. 3.4 Channel Numbers 2.2. 3.5 2.2. 3.6 2.2.3.7 Data Rate Media Access Protocol Transmitter Output Power y y y y y y y y y y y y y y y y IEEE 802.11ac OFDM 5150~5350MHz, 5470~ 5600MHz & 5650MHz ~ 5725MHz, 5725MHz~5850MHz 17 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 7 for 802.11n (HT40), 802.11ac (VHT40) 3 for 802.
# Feature Detailed Description 2.2. 3..
Configuration Configuration allows you to configure parameters for wireless networking. Security Supports enhanced security WEP, 802.1x, WPA and WPA2. 2.3.1 Security # Feature Detailed Description 2.3.1.1 Encryption 2.3.1.2 WEP Management 2.3.1.3 2.3.1.4 802.
# 2.7.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
This device is intended only for OEM integrators under the following conditions: (For module device use)㩷 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) Module approval valid only when the module is installed in the tested host or compatible series of host As long as 3 conditions above are met, further transmitter test will not be required.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiquͼ dans ce manuel.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
