Remote Control User Manual wo BE STOP WATER TIP DISTEMPER BEAT TEMP 2 QC EASY WASH LIGHT ATG EYEWASH = PURE BREEZE : ALPHA bear]
Content Installation Preparation 01. Remote control installation Usage Instruction 01 Remote control illustration g3 02. Rear/Front cleansing 04 03. Warm air dryer 04 04. Spray pressure adjustment 05. Nozzle position adjustment 06. Pulse function 05 07. Auto wash / dry 05 08. Eco mode 06 09. User presets 06 10. Temperature adjustment 11. Night light 07 12. Pure breeze 07 13.
instillation Preparation Remote Control Installation Remote control hanger installation (1) Place the remote control wall mount upright where you would like it mounted and mark the two mounting holes with a marker, Drill a hole In each marked position with a émm drill bit with a depth of 35mm If using the anchors. {2} Insert the anchors into the drilled holes. Place the wall mount over the anchors and tighten the screws.
Installation Preparation Remote Control Installation Remote control wall mount installation Option B (tape) (I) Clean and dry the area you wish to install the wall mount. {3) Remove the battery door cover and insert two AAA batteries. Replace the battery cover. — Installation area {2) Remove the adhesive tape cover on the back of the wall mount and press the mount firmly against the wall.
Couscous Instruction Remote Control illustration Rear Wash / Oscillation + REAR A Noes Nozzle Position Forward Increase Spray Pressure POSTILION Front Wash / Oscillation Decreases Spray Pressure Warm Air Dryer User Preset 1 — User Preset 2 indicator lights {only Stop / Eco Mode visible during operation) STOP. Dryer Temperatures — Water Temperature Seat Temperature WATER TEMP DRYER TEMP SEAT TEMP | Nightlight — | Easy Wash .
Usage Instruction Rear / Front Cleansing -While seated, press the Collateralize button to activate a rear wash. The indicator lights will appear, showing the current water temperature setting. If you press the Rear/Oscillate button a second time, the nozzle will oscillate back and forth to provide a wider cleaning area. The nozzle will spray for a full wash cycle and then stop. Press the STOP button anytime to end the wash. -While seated, press the Reconciliation button to activate a front wash.
Usage Instruction Spray Pressure Adjustment During ether a front or rear wash cycle, press the + button to increase the spray pressure, Press the button to decrease the spray pressure. During adjustment, the indicator lights will display the current pressure setting. Nozzle Position Adjustment During either a front or rear wash cycle, press the [ A J button to adjust the nozzle position forward. Press the [Vv ]1o adjust the nozzle position backwards.
Usage Instruction Eco Mode / Energy Saver Press and hold the STOP button for secs to turn on/off Eco Mode, The Indicator light around the side control knob will slowly fade in and out when Eco Mode is active, With Eco Mode enabled, the heated seat temperature will drop to level 1 when idle. The seat will return to the set temperature once a user sits down STOP HOLD TO ECO r L User Presets The two User Preset buttons can be used to save two different setting profiles.
Usage Instruction Temperature Adjustment Water Temperature Press the WATER TEMP button to adjust the water temperature. The Indicator lights will show the current temperature setting. Each press of the WATER TEMP button will cycle through the temperature settings. when the Indicator lights are all off, then the water heating Is turned off. Dryer Temperature Press the DRY TEMP button to adjust the wam air drying temperature. The indicator fights will show the current temperature setting.
Usage instruction Other Operations Remote Control User Code The remote control utilizes IR technology to communicate with the seat. it typically does not pass through walls and households with multiple units generally do not experience interference. In rare cases where interference does occur, you may need to change the remote control user code of the seats. Using the remote control near the seat, press and hold the STOP button and then press the REAR button.