Content 1. Important Safeguards and instructions. 2 Ports identification 3. Main Unit Knob instructions: 4. Main Unfit Side Button Instructions 5. Technicolor Specification — 6. Packing List 7. Product Dimension and Installation Tool 8. Installation of Main Unit Installation of Base Plate installation and Disassembly of Main Uri Installation of Water Inlet Pips and T Evasive. Preparation 10.
IMPORTANT SAFEGUARDS ‘when using electrical products, especially when children are present, basic safety precautions should always be followed, Including the following: 1 The appliance ls not to be used by persons (including children} with reduced phys teal, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or Instruction. 2.
IMPORTANT SAFETY INSTRUCTIONS i CAUTION —medicates that allure to follow the Instruction moy souse body Injury or property damage. 1. Do not install or use the product in wet places like showers of steam rooms 2. tls recommended to use water-proof electrical outlet which should be Installed in a place where is not easily to get wet. 3. This product should be used with TIOV-120V, 50/60Hz electrical current only, load current Is at least 15A.
Side Control Knob Instructions 7 1 While seated, tum the Side Control Knob clockwise to start a Rear Wash Rear and Dry cycle. The seat will caplets a full rear wash cycle, then a ful 7 N Wash drying cycle, then stop. OO 2 During the wash, fuming the knob clockwise wil move the nozzle forward. Turning the knob counterclockwise wil move the nozzle backward, 1 While sated, turn the Side Canal Knob counterclockwise a start o Front front | Woh ond Dey cycle.
Toilet Requirements Product Dimensions Recommended Tools 5-74 — * Note: Please musk sure your toffee Is compatible Ope manse before connecting water or electricity. installation of Main Unit *Prehistorical hiss beer pressure tested of the fit tony with satisfied water before shipping Please noe that there may be residual water present, Ths & nom.
Installation of water Inlet hose ond T valve Please select the appropriate installation method according to your actual situation BE Method standard Installation with accessible toilet fll valve. homecoming no sur or ene A hose Forest pd c=" shutoffvakve Existing toilet water supply has Bidet supply hose ® Connect the T valve to the toilet fll valve 6s shown. Ensure the Tuber washer is peasant ot the T valve to toilet connection. @ Connect your existing toilet water supply hose as shown above.
Preparation 1. Turn an the tower supply Slowly open the shut-off valve. Check for leaks ot each threaded connection. If no leaks are present, open the shut-off valve completely and continue monitoring unt sure. If the T valve to toilet connection Is leaking, If's generally because the washer is not present or seated proper. Please double check ond also check to see that the T valve is threaded on straight.
Maintenance Independence of Bidet Sea 1 Unplug the power cord before doing maintenance. 2. Use only a soft, dome cloth with mild soap to clean. Veld using harsh hernial cleaners like bleach, ammonia, and alcohol or the seat will discolor and crack over time. These chemicals degrade plastic. ~ Note: Do not rinse the surface of the product directly with water | during contentedness. al The stainless steel nozzle deans self before and after each wash cycle.
Tum off the stat off valve, 2 Unplug from electrical cutie: 3, Disassemble the cover and unscrew the fighter nonnarcotic cover wht a screwdriver. — 4. Toke out the filter assembly with needle nee pliers. re i 5 Con out he fe sander running wie yang a Torah. ( g 6, Reinstall he Niter an tighten the Over with a screwdriver. 1 \ Nom Note: Be careful not 10 damage the sealing ring, otherwise water moy eck.
Disassembly ond installation of suppl hose Disassembly: Open the clamp cover, rotate it counterclockwise, and use a fiat-blued screwdriver to pry the clamp aut of the slot. BB installation: Push the hose Into the quick-connect fitting on the unit. Secure with provided camp. b. Rotate the clamp until the opening faces down. «.
Troubleshooting Guide Problem Straighten the hose to remove ‘Water supply hose is kinked the kink Ne water from South valve nozzle Shut-off valve is off Turn on the shut-off valve A water allure occurred Restore the water supply Straighten the hose ta remove ‘Water supply hose is kinked The Kink jin shut-off valve snot Tull Turn on the shut-off valve fully Filter Is clogged Clean the filter Low water The water temperature is not set temperature | properly Adjust the water temperature Low seat The set temper