TM User’s Manual
S2000 SERIES & S2300 SERIES COMBO & C2200 2 CONTENTS MAIN FEATURES For your Safety Unpacking General Operation RCU Rear Panel INSTALLATION Connecting to TV using SCART support Connecting to TV & VCR using RCA support Connecting to Digital Amplifier MAIN MENU 1. Edit Channel 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete All 2. Installation 2.1 Satellite Installation (optional) 2.1.1 Antenna Connection 2.1.2 Satellite List 2.1.3 Antenna Setup 2.1.4 Single Satellite Search 2.1.
S2000 SERIES & S2300 SERIES COMBO & C2200 Switch the receiver off whenever it remains out of service for an extended period. Keep the receiver away from flower vases, tubs, sinks, etc. in order to avoid damaging the equipment. Do not block ventilation holes of the receiver so that air can circulate freely. Do not touch the receiver during thunder, since that might create electric-shock hazards. Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface.
S2000 SERIES & S2300 SERIES COMBO & C2200 4 UNPACKING TXT REMOTE CONTROL SLEEP SUB USERS MANUAL AUDIO/VIDEO CABLE (OPTIONAL) PAUSE BATTERIES (OPTIONAL) RECORD V-FORMAT ►, II ◄◄, ►► GENERAL OPERATION • • V-MODE SAT (optional) ZOOM Enter into the sleep in mode Dispay subtitle. Pause: Select for freezing the image. Press once to freeze the image, press again to unfreeze it.
S2000 SERIES & S2300 SERIES COMBO & C2200 5 REAR PANEL (S2000 SERIES) CONNECT TO 12V TO AN EXTERNAL 0/12V SWITCH LNB IN: CONNECT TO SATELLITE ANTENNA LNB OUT:CONNECT TO THE OTHER RECEIVER CONNECT TO A PC FOR S/W UPGRADE CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER POWER ON/OFF CONNECT TO TV USING A SCART CABLE CONNECT TO ADIGITAL AMPLIFIER CONNECT TO USB DEVICE CONNECT TO TV SET DV-OUT INPUT CONNECT TO THE INTERNET (optional) REAR PANEL (C2200) CONNECT TO THE ACOUSTICS CONNECT TO TV USING A SCART CABL
S2000 SERIES & S2300 SERIES COMBO & C2200 6 REAR PANEL (S2300 SERIES COMBO) CONNECT TO A DIGITAL AMPLIFIER CONNECT TO A PC FOR S/W UPGRADE ANT IN: CONNECT TO ANTENNA LOOP OUT: CONNECT TO ANOTHER RECEIVER LNB IN: CONNECT TO SATELLITE ANTENNA LNB OUT:CONNECT TO THE OTHER RECEIVER CONNECT TO TV USING A SCART CABLE CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER CONNECT TO USB DEVICE POWER ON/OFF CONNECT TO THE INTERNET CONNECT TO TV SET DV-OUT INPUT CONNECTING TO TV USING SCART SUPPORT (S2300 SERIES COMBO)
S2000 SERIES & S2300 SERIES COMBO & C2200 7 CONNECTING TO TV USING RCA SUPPORT (OPTIONAL) IN VIDEO AUDIO R Satellite Dish L TV IN TV AUDIO R VIDEO L Alma S2000 Series Alma C2200 CONNECTING TO DIGITAL AMPLIFIER Satellite Dish Alma S2000 Series DIGITAL AUDIO CONVERTOR OR AMPLIFIER DIGITAL AUDIO L R SPEAKER Alma C2200 & Alma S2300 Series Combo
S2000 SERIES & S2300 SERIES COMBO & C2200 8 MAIN MENU Make sure that you have properly installed and connected the cables of the receiver . If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen. During the normal TV/Radio mode, press MENU key on the RCU to enter into the Main Menu window. 1. Edit Channel 1.
S2000 SERIES & S2300 SERIES COMBO & C2200 9 ii. Edit (green colour key) Press green colour key to move the Edit button upward. Select the program and press OK key to pop up the Rename window. In Rename window, press red colour key to switch between capital letter and lower letter; press green colour key to delete the character on the cursor; press keys to move the cursor left or right; press numeric keys (0-9) to input the character, please refer to the down table.
2. Installation 2.1 Satellite Installation (optional) 1. Press OK key or key to pop up the “Input Password” dialogue, you can not enter into the menu unless the correct password is inputted. The default password is “0000”. 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. S2000 SERIES & S2300 SERIES COMBO & C2200 Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name.
S2000 SERIES & S2300 SERIES COMBO & C2200 Suppose that you have selected Fixed Antenna in the Antenna Connection window. 1. Tuner: Show you the LNB selected. 2. Satellite: All selected satellites in the satellite list are displayed in this item. Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. 3. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above. 4.
S2000 SERIES & S2300 SERIES COMBO & C2200 2.1.4 Single Satellite Search 2.1.6 TP List 1. Press PR+,PR- keys to select the proper satellite. 1. Satellite : Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. 2. FTA Only: Press keys to select between Yes and No. 3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio. 4. Network Search: Select between No and Yes.
S2000 SERIES & S2300 SERIES COMBO & C2200 13 2.2 Cable Installation (optional) 2.2.1 Auto Search Press OK key to start searching program quickly. 2.2.2 Manual Search 1. Scan Mode: Press key to select in circle. 2. Ch No: Press key to select. 3. Symbol Rate: Press number key to input certain value or press key to select in circle. 4. Modulation: Press key to select in circle. 5. Network Search: Select between Yes and No. 6. Search: Press OK key to start searching. 3.3 Display Setting 1.
1. Timer mode: The default mode is off. You can set the timer once, daily, weekly, monthly and yearly. 2. Timer Service: Select between Channel or Record. If Channel is selected, the Wakeup Channel is displayed in the following item. If Record is selected, the Wakeup Message is displayed in the following item. In wakeup message, you can select among Birthda y, Anniversary, General. At the same time the duration item turns grey. 3. Wakeup Date, On Time: Use numeric keys to input the valid date.
S2000 SERIES & S2300 SERIES COMBO & C2200 15 Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit. 4.3 Upgrade By RS232 1. Press keys to select among allcode, maincode,card,Radioback,keydate defaultdb, userdb. The default option is allcode. 2. Press OK key at the Start button to start checking serial port. 4.
S2000 SERIES & S2300 SERIES COMBO & C2200 In record list Red key: Press red key to enter the rename window, you can rename the file by press number 0-9 on RCU Green key: Press green key to lock the file you selected Yellow key: Press yellow key to delete the file you selected. 4.9 Remove USB device Press OK on this item it will pop up a dialogue:”You can safely remove USB device now! “, then you can move your USB device safely. 4.
S2000 SERIES & S2300 SERIES COMBO & C2200 17 7.2 EPG (Electronic Program Guide) 5. Game 1. Press OK key or key to enter into the game. 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 4. Select the game that you want to play and press OK key to enter into the window. 6. REC 6.1 PVR Storage Information Show you the information in windows as besides. Red key: Press red key to format the disk.
S2000 SERIES & S2300 SERIES COMBO & C2200 18 7.11 Audio 1. Press AUDIO key to enter into the Audio window. 2. Press keys to select among Left, Right, Stereo, and Mono. 3. Changing the audio mode is only connected with the current channel, not all the channels. 4. Press MENU or EXIT key to close this window. 7.12 Recall Press ← PR key to switch the current channel to the previous channel. 7.13 FAV 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group.
S2000 SERIES & S2300 SERIES COMBO & C2200 19 SPECIFICATIONS Main Features S2000 Series S2300 Series Combo CPU Frequency C2200 400MHz Flash Memory 1PC 32Mbit/8MByte SDRAM Memory 1PC 32Mbit/4MByte SPI FLASH 1PC 64X16Mbit/128Mbyte DDR2 Tuner DVB-S DVB-T DVB-C Tuner Type STV6110A+3501 On board Onboard Tuner IT9133 Frequency Range 950~2150MHz 177.5 ~ 227.5MHz; 474 ~ 858MHz 51 ~ 860MHz LNB Power and Polarization Vertical 13VDC; Horizontal 18VDC @ 400mA (max) 22KHz ± 0.4KHz (0.6V ± 0.