AVIT (AMP-2000/5000) User’s Guide For models available for firmware upgrade and how to upgrade, see related notices and/or resources (Download) at our homepage. www.avitmp3.
p.4 Copyrights Alltec Electronics Co., Ltd. has the copyright of this User’s Guide. No part of this document may be reproduced, copied, or transmitted in any form or by any means –copying of photographs, recording, or storing/playing of information - without the prior written permission of Alltec Electronics Co., Ltd. - As for operating systems (OSs) requiring an installation driver: Windows 98/SE users need only to install the driver once before using this product.
p.5 Precautions For safety We recommend you should AVOID: 1. Putting the MP3 player under direct sunlight or near heat (e.g. around a heater); 2. Putting metallic or flammable foreign substances into the MP3 player; 3. Disassembling or remodeling the MP3 player randomly; 4. Leaving the MP3 player in a damp/dusty/sooty place for long seconds (This may lead to failure); 5. Spreading/pouring water directly on the MP3 player in clearing it; 6. Dropping the MP3 player or give a severe shock to it; 7.
p.
p.8 1. Name of each part 1-1.
p.9 1-2. Left and right side Power ON/OFF (Play/Stop) Recording/Block Repetition setting USB port Volume button (ESC) Hold switch 1-3.
p.10 1-4.
p.11 2. Display configuration and components 2-1. Display configuration 1) Play status 2) File format 3) Equalizer 4) Block repeat 5) Repeat mode 6) Charge mode 7) Battery level 8) Hold function 9) Volume 10) Time 11) Current song title 12) Next song title 13) Playing 14) Current folder 15) Current song index/Total No.
p.12 2-2.
p.13 2-3. About icons Icon type Operation z File play icon Play Starts playing a file. Pause Stops Recording/Play temporarily. Standby The MP3 player is ready to operate in MP3 mode. Stop The MP3 player stops. Recording Recording is performed. Playing A file is playing. z Equalizer icon Standard The equalizer is in Standard mode. Rock The equalizer is in Rock mode. Pop The equalizer is in Pop mode. Jazz The equalizer is in Jazz mode. Classic The equalizer is in Classical mode.
p.14 Icon type Operation Descriptions z Block Repetition mode icon Section AThe starting point for block repetition Block repetition Consecutive play from a set section A to a section B Section B An ending point for block repetition z Others No. of songs Front: Current song’s index Back: Total No.
p.15 3. How to install an installation driver on Windows 98 *. On Windows ME/2000/XP, you don’t have to install this driver. Once connected, the MP3 player will be ready to work. Operation type Operation Descriptions image See “How to connect the MP3 player to the PC” for the connection to the Before installing computer. Insert the driver CD. Put the Installer CD into the CD-ROM drive.
p.16 Operation type Operation Descriptions image Install the driver (3). The driver file is installed and a folder named “alltec” is created in the Program Files folder. Install the driver (4). When connecting the USB port of the MP3 player to your PC, you can see the following screen on the PC. Install the driver (5). Select “Search an appropriate driver for the device” and click “Next”.
p.17 Operation type Operation Descriptions image Install the driver (6). Select “Select a location to search” for search and set the alltec folder in the Program File as the path. Install the driver (7). The screen appears to search the driver. The driver file is completely installed. The screen indicates the installation process gets finished.
p.18 4. How to connect the MP3 player to the PC 4-1. Connecting the MP3 player to the PC and the USB port Operation type Operation Descriptions image Connect the MP3 player to the PC. Connect the USB port seen at the right bottom of the MP3 player to the USB ports of both the PC and the USB HUB. z When the MP3 player is connected to the PC through the USB cable, the product will be automatically charged. z As for the USB port, you need to use a dedicated cable provided by Alltec Electronics only. 4-2.
p.19 Operation type Operation Descriptions image * Cautions When you connect the USB cable to the MP3 player, the “rectangle” figure of the cable port should be seen on the top. The “triangle” figure, on the other hand, should be placed on the bottom. If you force the USB cable into the hole, this may cause product failure. The connection is completed.
p.20 5. How to send a file from the PC to the MP3 player Operation type Operation Descriptions image Before transferring See “How to connect the MP3 player to the PC” for the connection to the computer. Check the removable disk. Double-click My Computer on Desktop to check the new removable disk (storage). Double-click it to open the Explorer window. Copy MP3 and common type files. Open a folder containing MP3 files in the computer and select a file(s) to get the file sent to the removable disk.
p.21 Operation type Operation Descriptions image Disconnect the MP3 player from the computer After the transfer, click the icon in right on Desktop to see a message “Remove hardware”. Click on the message, and the MP3 player will be safely removed from the PC. As for Windows 98, when the file transfer is completed, the MP3 player will be disconnected from the PC with no removal process. The screen appears after the disconnection.
p.22 6. How to turn the MP3 player on/off Operation type LCD display Used button Descriptions Turn on the power. When you press the POWERON/OFF button quickly, the power will be on. Turn off the power. When you press and hold the POWERON/OFF button for about three seconds with the MP3 player on, the power will be off.
p.23 7. How to play a file Operation type LCD display Used button Descriptions Before playing The screen initially appears when the power gets on. Play (PLAY) When you press the POWERON/OFF button quickly, a song will be played. When you press the button quickly again, this will make the MP3 player pause. Select FF (next song) or REW (previous song) in STOP mode When you press the POWERON/OFF button while playing, this will make the MP3 player pause.
p.24 Operation type LCD display Used button Descriptions Select FF (Fast forward) or REW (Fast rewind) in PLAY mode When you quickly roll the MENU button up/down, you can select the next song or the previous song. When you keep rolling the MENU button up/down as seen in the figure below with a song played, the song will go either fast forward or fast backward * Depending on the bit rate type of a file, the initial proceeding time and the actual proceeding time may differ from each other.
p.25 8. How to set up the equalizer Operation type LCD display Used button Descriptions Select a MENU When you quickly press the MENU button in the STOP mode, you can see the MENU mode. * In the MENU mode, if there is no key input for a certain period, the mode will automatically move to the previous mode. Set the equalizer (To find an appropriate sound mode for optimized sound quality of an MP3 file). When you roll the MENU button up in the MENU mode, you can select a menu you want.
p.26 Operation type LCD display Used button Descriptions Select the equalizer (2). Type of EQUALIZER mode 1) Standard 2) Rock 3) Pop 4) Jazz 5) Classical Exit a menu/go to the Main menu. After you select an EQUALIZER mode, the menu will automatically return to the Main menu. When you press the ESC key, the Main menu will appear.
p.27 9. How to set repetition mode Operation type LCD display Used button Descriptions Select a MENU When you quickly press the MENU button in STOP mode, you can see the MENU mode. Repetition setting (For setting file repetition) When you roll the MENU button up and down in MENU mode, you can select a menu you want. If you push the button up twice, you can select the Repetition Setting mode. When the Repetition Setting icon is lit, press the MENU button quickly to enter the Repetition Setting mode.
p.28 Operation type LCD display Used button Descriptions One song 2) Repetition mode for one song – The MP3 player will consecutively play one selected song in a selected folder. All 3) Repetition mode for all songs - The MP3 player will consecutively play all and every song in it. Bookmark 4) Bookmark mode - The MP3 player will consecutively play all of selected songs in a selected folder. * To use this mode, you need to have bookmarked songs.
p.29 Operation type LCD display Used button Descriptions Folder 5) Repetition mode for a folder - The MP3 player will consecutively play all and every song in a selected folder. Bookmark notes If you select a file other than bookmarked ones, the Bookmark mode will be automatically disabled although you selected the Bookmark mode. Set to Bookmark-> Select a file other than bookmarked ones -> Return to Standard mode automatically Exit a menu/go to the Main menu.
p.30 10. How to set Navigation mode Operation type LCD display Used button Descriptions Select a MENU. When you quickly press the MENU button in the STOP mode, you can see the MENU mode. Set the Navigation mode (To promptly search/set/delete a song you want in a convenient way). When you roll the MENU button up and down in MENU mode, you can select a menu you want. If you push the button up thrice times, you can select Navigation mode.
p.31 Operation type LCD display Used button Descriptions Select a Navigation file. This screen initially appears in the file selection mode when you press the MENU button. From the top, you can see a folder name with the MP3 file names in the MP3 player listed below. Select/change a Navigation file. When an MP3 file you want is lit, press the POWER ON/OFF button to select a song. After a file is selected, the screen will go back to the initial MP3 play screen with the selected song played.
p.32 Operation type LCD display Used button Descriptions Shift to Bookmark mode (It helps you select a file(s) you want). This screen initially appears in the Bookmark mode. Press the MENU button to enter the Shift to Bookmark mode. Press the MENU button until a file you want to select is lit, and press the MENU button. Then, the icon will turn to Bookmark icon as seen in the figure, which means the file is bookmarked.
P.33 Operation type LCD display Used button Descriptions Select File deletion mode (To delete some of existing files). Roll the MENU button up and down until the File deletion mode is lit, and press the MENU button to go into the mode. When you are rolling the MENU button up and down until a desired file is lit, press the POWER button to delete the file. Alternate YES/NO. -> Roll the MENU button up and down. Select YES/NO. -> POWER ON/OFF button.
p.34 11. FM radio Operation type LCD display Used button Descriptions FM radio mode (This setting enables you to listen to FM radio broadcasting.) 1) In the Navigation mode, roll the MENU button up and down until the FM radio menu is lit, and press the MENU button to go to the FM radio mode. 2) In the initial MP3 screen, press and hold the MENU button for about three seconds to jump to the FM radio mode. Initial screen of radio mode This screen initially appears in the FM radio mode. Tune the radio.
Operation type LCD display Used button Descriptions Store an FM channel (To automatically/manually save a frequency). In the initial screen, press the MENU button to get channels automatically stored. Alternate YES/NO. -> Roll the MENU button up and down. Select YES/NO. -> Press the MENU button. When you select “YES”, channels are automatically searched to sequentially go to the index. Selecting “NO” makes the menu to turn to the next one. To go to the Main menu, press the ESC button.
p.36 Operation type LCD display Used button Descriptions Select sound setting (To set appropriate sound in listening to FM radio). This screen initially appears in the sound setting mode. In the FM band menu, press the MENU button to go to the sound setting mode. The options include: STEREO and MONO types. The status is displayed on the top of the LCD display. How to select one is the same as that of the Main menu. After the setup, the screen will automatically go to the next mode.
p.37 Operation type LCD display Used button Descriptions Store a channel automatically (To automatically search for frequency and save it). This mode helps you automatically search for frequency to store a channel. Select YES in the automatic channel storing mode in the FM menu. Upon this, the MP3 player will search for frequency to sequentially store it to the index. After the storing, the screen will automatically go to the Preset mode.
p.38 Operation type LCD display Used button Descriptions Record FM radio (To record FM broadcasting to turn it into an MP3 file). When you want to record the FM broadcasting you are listening to, press the REC button for about three seconds to get it recorded. * In case available memory is not sufficient during the recording, a message “DISK FULL” appears with the last file stored. Pause recording FM radio.
p.39 Operation type LCD display Used button Descriptions Store recorded files consecutively. When you push the MENU button up during the FM recording, the file “FM00001.MP3” will be stored, with the recording automatically continuing with the file “FM00002.MP3”. Check the proceeding time for FM radio recording (To check available recording time for FM radio or ongoing recording time).
p.40 12. Configuration mode Operation type LCD display Used button Descriptions Configuration mode (This setting helps you check basic configurations of the MP3 player.) In the MENU mode, roll the MENU button up and down so that you can select a menu you want. Pushing the button up four times, you can select the Configuration mode. When the Configuration icon is lit, press the MENU button to go to the Configuration mode.
p.41 Operation type LCD display Used button Descriptions Check firmware version (To check the latest firmware version). When you press the MENU button, you can see the firmware version in the menu. To move to the Main menu, press the MENU button quickly or press the ESC button. * Firmware version items Year Month Date Memory capacity (This setting helps you check the current memory status of the MP3 player.) With this, you can check the available memory capacity of the MP3 player.
p.42 Operation type LCD display Used button Descriptions SLEEP setting (This setting turns off the MP3 player in a set period. It would be convenient for you to use this setting at bedtime.) When you press the MENU button quickly, the screen shows the menu. Roll the MENU button up and down until a SLEEP time you want is lit. Then, select one by pressing the MENU button quickly. The options include: NO, 30 minutes, 60 minutes, and 120 minutes.
p.43 Operation type LCD display Used button Descriptions Sound quality of mike (This setting helps you set the sound quality of mike in voice recording. The larger the set figure is, the better the quality is.) With this, you can select the sound quality of the mike. When you press the MENU button quickly, the screen shows the menu. Roll the MENU button up and down until a quality setting you want is lit. Then, select one by pressing the MENU button quickly. The options include: 8Kbps ~ 128Kbps.
p.44 13. Screen setting mode Operation type LCD display Used button Descriptions Screen setting mode (This setting helps you set the display of the MP3 player.) In the MENU mode, you can roll the MENU button up and down until a menu you want is selected. When you push the button up five times, the Screen setting mode is selected. When the Screen setting icon is lit, press the MENU button quickly to go to the Screen setting mode. LCD ON time (This setting helps you set the time when the display is activated.
P.45 Operation type LCD display Used button Descriptions Language setting (This setting helps you set the language seen in the display of the MP3 player.) With this setting, you can select a language displayed in the LCD display. Roll the MENU button up and down until a language you want is lit. Then, select one by pressing the MENU button quickly. The options include: Korean and English. When you select one, the screen will automatically move to the Main menu. Select the display (To show file information).
p.46 14. Exit a menu Operation type LCD display Used button Descriptions Exit a menu With this, you can exit the MENU mode after all settings are made. Roll the MENU button up and down to select the exit. Then, press the center of the MENU button quickly to exit the menu.
p.47 15. Recording Operation type LCD display Used button Descriptions Voice recording (This setting helps you record with the built-in mike of the MP3 player.) The mike is installed in the front center of the MP3 player. To activate voice recording, set the recording mode as Voice. Select recording (To select recording method). With the MENU button, select MENU -> Configuration -> Select recording -> Voice. * See page 42 for the recording setting in the Configuration mode.
p.48 Operation type LCD display Used button Descriptions Recording This screen initially appears in the voice recording mode. When you press and hold the REC button for about three seconds, the recording will start. * If available memory is not sufficient during the recording, a message “DISK FULL” appears with the last file stored.
p.49 Operation type LCD display Used button Descriptions Store recorded files consecutively. When you roll the MENU key up during the voice recording, the file “VOC00001.MP3” will be stored, while the recording automatically continuing with the file “VOC00002.MP3”. Complete/store recording To save a recorded file, press and hold the REC button for about three seconds to automatically store the file to the VOC folder. After the storing, the screen will automatically move to the Main menu.
p.50 Operation type LCD display Used button Descriptions Play a recorded file (To play a voice-recorded file). To play a recorded file, press the POWER ON/OFF button quickly. * You can select a file you want with the MENU button using “Navigation” function See pages 30 - 31 for Navigation. Return to the MP3 mode. To go back to the MP3 mode from the recording mode, press the MENU button to change the folder to MP3.
p.51 15. Line-in recording Operation type LCD display Used button Descriptions Line-in recording (This setting helps you record with an external device connected to the MP3 player.) * Caution: The jack of the MP3 player may not fit in the port of the external device. You need to buy the connector additionally. Connect the external device for recording as seen in the figure. If you want to use an external mike and/or other external devices, activate the Line-in mode.
p.52 Operation type LCD display Used button Descriptions Sound quality of line-in With this, you can select the sound quality of the line-in. When you press the MENU button quickly, the screen shows the menu. Roll the MENU button up and down until a quality setting you want is lit. Then, select one by pressing the MENU button quickly. The options include: 32Kbps ~ 160Kbps. When you select one, the screen will automatically move to the Main menu. Recording This screen initially appears in the recording mode.
P.53 Operation type LCD display Used button Descriptions Pause recording When you press the REC button quickly, the recording will pause. If pressed again, the recording will go back on. Store recorded files consecutively. When you push the MENU key up during the line-in recording, the file “LINE00001.MP3” will be stored, while the recording automatically continues with the file “LINE00002.MP3”.
p.54 Operation type LCD display Used button Descriptions Wait for another file recording After the recording, the LINE00001 file will be stored to the LINE_IN folder and the screen will waiting for play. Play a recorded file. After the recording, you can play the file by pressing the MENU button up and down until a file you want is lit. Then, press the POWR button quickly. * You can select a file you want with the MENU button using “Navigation” function See pages 30 - 31 for Navigation.
p.55 16. MENU mode while playing Operation type LCD display Used button Descriptions Enter a menu while playing While playing, you can press the MENU button quickly to see the MENU mode at the bottom of the LCD screen. Select the Equalizer mode while playing By rolling the MENU button up and down, you can select a mode you want. When the Equalizer mode is lit, press the MENU button quickly to select a mode you want.
p.56 Operation type LCD display Used button Descriptions Block repetition setting while playing This setting helps you set a block to play repeatedly. Press the MENU button while playing until the Block repetition is lit, and press the MENU button quickly. If you press the button once: Start A is set. If you press the button twice: End B is set. If you press the button three times: Block repetition stops.
p.57 Operation type LCD display Used button Descriptions Exit a menu/go to the Main menu. After you select a menu, you can go back to the Main menu by pressing the ESC button quickly.
p.58 17. How to charge the MP3 player Operation type Operation Descriptions image Before charging See “How to connect the MP3 player to the PC” for the connection to the computer. When the USB port is connected: Connect the MP3 player to the PC or the charge adapter. The AC plug seen at the right top part is a battery charge lamp. During the charge, the battery level display is moving up and down at the right top part.
p.59 18. Troubleshooting In case of any errors, please check the followings before contacting us. 1.I can’t turn on the MP3 player. - Is it charged? Please get it charged. - Is the HOLD button of the MP3 player pushed to ON? (If so, please push the button to OFF.) - Push the RESET button with a pin (at the back part of the MP3 player). 2. The MP3 player remains mute or makes noises.
p.60 19. Product specifications Classification Audio Supported files Voice recording and encoding FM radio Max play time Power supply General information Items No. of channels Frequency range Headphone output Signal-to-noise ratio Bit rate File format 256 MB 512 MB Frequency range No.
p.61 20. After-sales service 1. The product “AVIT” is provided by Alltec Electronics. The MP3 player is manufactured under strict production management system and quality management system. 2. In case of malfunctions in normal use, you can be offered free repair service from the dealer you purchased the product or our service center in the warranty period (one year since the purchase). 3. Regardless of the warranty period, you need to be billed for repairing any malfunctions due to your negligence. 4.
Product warranty Product name Production No. Customer Dealer Model name Name Address Name Address Telephone Telephone Purchase date Manufacturer Warranty period One year Company: Alltec Telephone Electronics. Co., Ltd. Address Pyeonik C – 211, Incheon Industrial Goods Distribution Center, 294, Songnim 4-dong, Dong-gu, Incheon, South Korea Parts for repair will be stocked for one year since related products will be out of the market. Please fill the blank field above in the warranty in product sales.