Installation & Assembly

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (2)

This fixture is designed to dim with an

Electronic Low Voltage dimmer. Dimming

levels will vary by dimmer.

Below is a List of Recommended Dimmers:

· Lutron DVELV-330P

· Lutron MAELV-600M

· Lutron SAELV-153P

· Leviton IPL06-10Z

· Leviton 6674-POW

· Legrand Tru-Universal ADTP703TUW4

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

To prevent water intrusion, caulk around back-plate

where fixture meets the wall using outdoor silicone

sealant. Leave a small gap at the bottom to allow

moisture to exit.

PAGE 1
Please consult your electrician for hanging fixture and wiring. To prevent water intrusion, caulk around back-plate where fixture meets the wall using outdoor silicone sealant. Leave a small gap at the bottom to allow moisture to exit. PRODUCTS ARE NOT INENDED FOR COMMERCIAL USE. This fixture is designed to dim with an Electronic Low Voltage dimmer. Dimming levels will vary by dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting bracket (B) Backplate (C) Wire Nuts (x3) (D) Mounting screws (x4) Locate all hardware & components before discarding packaging A 1.) Step.1: Install Mounting bracket(A) to outlet box. B 2.) Step.2: Wire fixture to wires in outlet box. Green/Copper wire is for Ground. A D B C 3.) C Step.3: Install Backplate(B) to Mounting bracket(A). D 4.) Step.