Assembly Instructions

ManualsBrandsAllModern Manuals3-4 Person Patio Conversation SetsJariel Solid Wood 4 - Person Seating Group with Cushions

Corner Chair

Caution: You must read this before you proceed

Caution: This Chair is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Whenever moving or lifting the Chair and to prevent damage to the Chair, two adults may be

needed to execute these actions.

Page 1 of 7

Summary of content (7 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Corner Chair Caution: This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. Whenever moving or lifting the Chair and to prevent damage to the Chair, two adults may be needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Seat Panel 1 B Backrest Panel 1 C Leg 4 D Seat Cushion 1 E Back Cushion 1 Description QTY ① Bolt (M8x40mm) 9 ② Bolt (M6x40mm) Sleeve Nut (M6x15mm) Hardware Label ③ Picture 5 5 ④ Washer 9 ⑤ Allen Key 2 Page 2 of 7
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Cushion (E) Backrest Panel (B) Seat Cushion (D) Seat Panel (A) Leg (C) FRONT FACING This Corner Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Corner Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) With assistance from your adult partners, turn the Seat Panel(A) facedown as pictured above. 2.2) Attach Leg(C) into the housing on the Seat Panel(A) using Bolts(①), and Washers(④) with Allen Key(⑤) as shown above. Do not fully tighten the Bolts. Repeat the same process with the remaining three Legs(C).
PAGE 5
Step 3 3.2 3.3 3.1 3.1) With assistance from your adult partners, stand the Seat Panel(A) up. 3.2) Insert Backrest(B) into Seat Panel(A) as shown in the picture above. 3.3) Attach Backrest(B) to Seat Panel(A) using Bolts(②), and Sleeve Nuts(③) with Allen Keys(⑤) as shown in picture above. Do not fully tighten the Bolts. Step 4 Place the Chair on a flat, level surface. Carefully sit, onto the Chair. This pressure will help the Legs and Seat panel reach full alignment at all joints. Check for wobbles.
PAGE 6
Step 5 Place Seat Cushion(D), and Back Cushion(E) onto the chair as pictured. Secure the velcro straps as shown in the diagrams. Your Corner Chair is ready for use. This Corner Chair can only be used on a flat, level surface. Step 6 Note: This is an optional step in case you want to connect the Corner Chair and Loveseats. It should be done before securing Cushions. With assistance from your adult partners, rotate the latches onto the pre-fixed clips to connect the items together.
PAGE 7
Page 7 of 7