SEMITRAILER EXCHANGE FEATURES 1. Ensure the stability of receiving signal from sensors when signal Is weak. 2. Record the sensors' IDs, pressure and temperature limits of the wheels in trailer and trailer ID. 3. Support truck & trailer exchange. 4. Data of sensors in trailer is transferable between monitor and trailer exchange. 5. Visible and audible alert for high pressure, low pressure, high temperature and fast leakage. 6.
# TRAILER EXCHANGE FUNCTIONS 1). Input trailer ID (Normally for the first time to use trailer exchange) In standby mode, Press the "MODE" button on the monitor, it will show the ID code (six-digit numeral) of current trailer, meanwhile tire icons on the LCD trailer will flash.
). High pressure & Low pressure & Fast leakage alert Sensors send the pressure data to trailer exchange every 5 minutes, if the data is over or under its ranges, an audible alarm will sound and red light alert will flash. The alarm can be silenced by pressing the button on the trailer exchange, however, the red light will continue to flash until the pressure is restored to its ranges. 5).
Declaration of conformity FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.