User Manual

BURY GMBH & CO. KG

ROBERT-KOCH-STRASSE 1-7

D-32584 LÖHNE

page 5 / 6

After configuration COM port, choose

white pool like on the graphic bellow.

- In Edit Send

Sequence

bellow), choose HEX, and write sequence which will be sent to device:

AA 0A 24 03 00 87

After configuration COM port, choose

Send Sequence

function by double click on the

white pool like on the graphic bellow.

Sequence

window, write name of sequence definition (like on the graph

bellow), choose HEX, and write sequence which will be sent to device:

AA 0A 24 03 00 87

, and press OK.

function by double click on the

window, write name of sequence definition (like on the graph

bellow), choose HEX, and write sequence which will be sent to device:

PAGE 1
BURY GMBH & CO. KG ROBERT-KOCH-STRASSE 1-7 D-32584 LÖHNE - After configuration COM port, choose Send Sequence function by double click on the white pool like on the graphic bellow. - In Edit Send Sequence window, write name of sequence definition (like on the graph bellow), choose HEX, and write sequence which will be sent to device: AA 0A 24 03 00 87, and press OK.
PAGE 2
BURY GMBH & CO. KG ROBERT-KOCH-STRASSE 1-7 D-32584 LÖHNE - Start communication by pressing button on the control panel. Chose communication tion window from HEX to ASCII. To set correct mode, please press on arrow button to send this sequence. After each activity of the arrow button, mode will be changed. Dipl. -Ing. Tomasz Niedźwiedź E-Mail: niedzwiedz@bury.com Internet: www.bury.