Installation guide

AT-SPSX SFP Transceiver Installation Guide
Overview
The AT-SPSX SFP transceiver is capable of reaching a
maximum operating distance of up to 500 m and transmits
using an 850 nm wavelength.
The AT-SPSX SFP transceiver is designed to be used in
ATI products such as the AT-8000 and AT-9400 series
switches.
Verifying Package Contents
Make sure that the correct component and installation
instructions are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales
representative for assistance.
AT-SPSX Specifications
The SFP transceiver uses a fiber optic cable with LC
connectors.
Laser
Class 1 laser product. Do not stare into the laser beam.
Note
A transceiver must be connected to another transceiver
or fiber optic port that has similar operating
characteristics.
Note
You can hot swap the SFP transceiver. You do not
need to power off the networking device when you
install or replace an SFP transceiver.
Model
Maximum
Distance
Type of Fiber Optic Cable
AT-SPSX 500 m 50/125 µm multimode fiber
300 m 62.5/125 µm multimode
fiber
AT-SPSX SFP Transceiver Installation Guide
Overview
The AT-SPSX SFP transceiver is capable of reaching a
maximum operating distance of up to 500 m and transmits
using an 850 nm wavelength.
The AT-SPSX SFP transceiver is designed to be used in
ATI products such as the AT-8000 and AT-9400 series
switches.
Verifying Package Contents
Make sure that the correct component and installation
instructions are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales
representative for assistance.
AT-SPSX Specifications
The SFP transceiver uses a fiber optic cable with LC
connectors.
Laser
Class 1 laser product. Do not stare into the laser beam.
Note
A transceiver must be connected to another transceiver
or fiber optic port that has similar operating
characteristics.
Note
You can hot swap the SFP transceiver. You do not
need to power off the networking device when you
install or replace an SFP transceiver.
Model
Maximum
Distance
Type of Fiber Optic Cable
AT-SPSX 500 m 50/125 µm multimode fiber
300 m 62.5/125 µm multimode
fiber
AT-SPSX SFP Transceiver Installation Guide
Overview
The AT-SPSX SFP transceiver is capable of reaching a
maximum operating distance of up to 500 m and transmits
using an 850 nm wavelength.
The AT-SPSX SFP transceiver is designed to be used in
ATI products such as the AT-8000 and AT-9400 series
switches.
Verifying Package Contents
Make sure that the correct component and installation
instructions are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales
representative for assistance.
AT-SPSX Specifications
The SFP transceiver uses a fiber optic cable with LC
connectors.
Laser
Class 1 laser product. Do not stare into the laser beam.
Note
A transceiver must be connected to another transceiver
or fiber optic port that has similar operating
characteristics.
Note
You can hot swap the SFP transceiver. You do not
need to power off the networking device when you
install or replace an SFP transceiver.
Model
Maximum
Distance
Type of Fiber Optic Cable
AT-SPSX 500 m 50/125 µm multimode fiber
300 m 62.5/125 µm multimode
fiber
AT-SPSX SFP Transceiver Installation Guide
Overview
The AT-SPSX SFP transceiver is capable of reaching a
maximum operating distance of up to 500 m and transmits
using an 850 nm wavelength.
The AT-SPSX SFP transceiver is designed to be used in
ATI products such as the AT-8000 and AT-9400 series
switches.
Verifying Package Contents
Make sure that the correct component and installation
instructions are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales
representative for assistance.
AT-SPSX Specifications
The SFP transceiver uses a fiber optic cable with LC
connectors.
Laser
Class 1 laser product. Do not stare into the laser beam.
Note
A transceiver must be connected to another transceiver
or fiber optic port that has similar operating
characteristics.
Note
You can hot swap the SFP transceiver. You do not
need to power off the networking device when you
install or replace an SFP transceiver.
Model
Maximum
Distance
Type of Fiber Optic Cable
AT-SPSX 500 m 50/125 µm multimode fiber
300 m 62.5/125 µm multimode
fiber