User Guide

Water and moisture:

Do not expose the mixer to rain or moisture or use it in damp or wet conditions.

Do not place containers of liquids on it which might spill into any openings.

Ventilation:

Do not obstruct the ventilation slots or position the mixer where the air flow required for ventilation is impeded.

If the mixer is to be placed in a rack unit or flight case ensure that it is well ventilated.

Heat and vibration:

Do not place the mixer where it is subject to excessive heat or direct sunlight.

Keep the mixer away from any equipment which produces excessive heat or vibration.

Servicing:

Switch off equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen

into the openings, if the power cord or plug have become damaged, during lightning storms, or if smoke, odour or

abnormal noise is noticed.

Refer servicing to qualified technical personnel only.

Installation:

Install the mixer in accordance with the instructions printed in this User Guide.

Do not connect the output of power amplifiers directly to the mixer.

Only use audio connectors and plugs for their intended purpose.

Read instructions:

Retain these safety and operating instructions for future reference.

Adhere to all warnings printed here and on the mixer and follow the operating instructions printed in this User Guide.

Do not remove cover:

Never operate the mixer if the cover is not correctly fitted.

Power sources:

Only connect the console to mains power of the type described in this User Guide and marked on the rear panel.

Use a power cord with sealed mains plug appropriate for your local mains supply as provided with the mixer.

If the provided plug does not fit into mains your outlet consult your service agent for assistance.

Power cord routing:

Run the power cord so that it is out of the way and not likely to be walked on, stretched or pinched by items placed

upon or against it.

Grounding:

Never remove or tamper with the ground connection or polarity in the power cord.

8. Important Safety Precautions

For all additional information such as hardware specification, product information or technical support please go to

http://www.allen-heath.com

A limited one year manufacturer’s warranty applies to this product, the conditions of the warranty can be found at

http://www.allen-heath.com/legal

For service or support in your local area please go to

http://www.allen-heath.com/where-to-buy and search for the country you are in.

Please register this product at http://www.allen-heath.com/register to receive useful information from time to

time.

ZEDi-10FX User Guide AP10147 Issue 1

Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK

Additional Information