ZED-10FX USER GUIDE Publication AP7763
CONTENTS Warranty ......................................................................... 4 Conformity Statement ................................................. 5 Safety Instructions ......................................................... 6 Packed Items Checklist ................................................ 9 Introduction to ZED-10FX & 10............................... 10 Specifications .................................................................. 12 Dimensions ..................
WARRANTY Limited One Year Warranty This product is warranted to be free from defects in materials or workmanship for period of one year from the date of purchase by the original owner. To ensure a high level of performance and reliability for which this equipment has been designed and manufactured, read this User Guide before operating.
EMC & SAFETY This product complies with the European Electro magnetic Compatibility directives 2004/108/EC and the European Low Voltage Directives 2006/95/EC. This product has been tested to EN55103 Parts 1 & 2 2009 for use in Environments E1, E2, E3, and E4 to demonstrate compliance with the protection requirements in the European EMC directive 2004/108/EC. During some tests the specified performance figures of the product were affected.
SAFETY INSTRUCTIONS WARNING - Read the following before proceeding : CAUTION AC MAINS IN ~ ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR ! FUSE TYPE T 3.15A 20mm T 5.0A 20mm AC SUPPLY 220 - 240V~ 100 - 120V~ 47-63Hz 320VA MAX 300W MAX WARNING: This equipment must be earthed. SERIAL No: Made in the UK by ALLEN & HEATH WARNING - THIS APPARATUS MUST BE EARTHED. Read instructions: Retain these safety and operating instructions for future reference.
SAFETY INSTRUCTIONS Water and moisture: To reduce the risk of fire or electric shock do not expose the console to rain or moisture or use it in damp or wet conditions. Do not place containers of liquids on it which might spill into any openings. Ventilation: Do not obstruct the ventilation slots or position the console where the air flow required for ventilation is impeded. If the console is to be operated in a rack unit or flightcase ensure that it is constructed to allow adequate ventilation.
SAFETY INSTRUCTIONS General Precautions: Damage : Environment : Cleaning : Transporting : Hearing : ! Allen & Heath To prevent damage to the controls and cosmetics avoid placing heavy objects on the control surface, scratching the surface with sharp objects, or rough handling and vibration. Protect from excessive dirt, dust, heat and vibration when operating and storing. Avoid tobacco ash, smoke, drinks spillage, and exposure to rain and moisture.
PACKED ITEMS Check that you have received the following: Mic Mic Mic Mic Line Line GTR 1 GTR 2 Hi Z O/P Level Switch Left Left Left Right Right Right Hi Z Left USB Left Left USB IN L 20 0 40 20 0 40 GAIN - 10 10 60 40 M L 20 0 40 GAIN - 10 10 60 40 M L HPF 20 USB IN R 40 GAIN - 10 10 60 40 M G HPF Right - 10 10 Right HF FX OUT/ FOOTSWITCH 0 5 5 -15 -15 500 650 -15 +15 1k 500 200 650 -15 +15 1k 500 200 f 2k 120 4k 650 2k 500 120 4k 650 2
INTRODUCTION TO THE ZED-10FX Background Overview: The Allen & Heath ZED series mixers have been carefully and lovingly designed in the beautiful county of Cornwall in the UK and are manufactured alongside a wide range of professional audio mixing consoles to the same high standards.
INTRODUCTION TO THE ZED-10FX EQ: The ZED-10FX and ZED-10 mixers are equipped with a 3-band equaliser circuit on each mono input, with swept mid frequency section, and a 2-band EQ on the stereo channels. The frequency and response of each has been carefully chosen to give the maximum performance when using the EQ on a variety of sources.
SPECIFICATIONS Operating Levels Input Mono channel (XLR) Input -10 to –60dBu for nominal (+11dBu in max) Mono channel Line Input (Jack socket) +10 to –40dBu (+31dBu maximum) Stereo Input (Jack or phono sockets) 0dBu nominal (control = Off to +15dB) Output L/R Outputs ( XLR) Normal/DI out 0dBu/-30dBu +21dBu/-9dBu maximum. Aux & FX Outputs (Jack sockets) 0dBu nominal. +21dBu maximum. Record & Monitor Outputs (phono sockets) 0dBu nominal. +21dBu maximum.
DIMENSIONS Mic Mic Line Mic Line Mic GTR 1 O/P Level Switch Left Left Left Right Right Right GTR 2 Hi Z Hi Z Left USB Left Left USB IN L 20 0 40 GAIN 20 0 40 GAIN - 10 10 60 40 M L 20 0 40 GAIN - 10 10 60 40 M L HPF 20 USB IN R 40 GAIN - 10 10 60 40 M G HPF Right - 10 10 Right HF 0 HF 5 -15 500 650 -15 +15 1k 500 650 f 500 2k 120 4k 650 f 500 2k 120 4k 650 f 2k f 2k 3k MID +15 120 4k 3k MID 120 +15 -15 LF +15 -15 LF +15
BLOCK DIAGRAM SCHEMATIC MIC IN LINE IN L R USB AUDIO INPUT INSTRUMENT IN ST1-b L R L ST1-a R L R USB AUDIO INPUT L R Phantom Power GAIN + - 100Hz HM HF 3 BAND EQUALISER MONO CHANNEL HPF LF STEREO CHANNEL MONO CHANNELS 3&4 MONO CHANNELS 1&2 CLASS A FET HI-Z DI GAIN BOOST GAIN HF 2 BAND EQUALISER LF STEREO CHANNEL 1 DSP EFFECTS MIX PLAYBACK STEREO CHANNEL 2 EFFECTS PROCESSOR PLAYBACK INPUT PLAYBACK LEVEL LEVEL EFFECT TYPE BANK SEL UP SEL DOWN TAP/PARAMETER PFL PFL BAL P
MONO INPUT CHANNEL 1 & 2 Mic Input Socket Standard 3-Pin XLR socket wired as Pin 1=Chassis, Pin 2=hot (+), Pin 3=Cold (-). Line Input Jack Socket Standard 1/4” (6.25mm) Jack socket for balanced or unbalanced Micline level signals. MicWired Tip=Hot(+), Mic Ring=cold (-), Sleeve=Chassis. Line GTR 1 to the XLRGTR 2 The Line input connects input Hi Z Hi Z through a circuit, so be aware that the two signals will add together if both inputs are plugged in simultaneously.
0 20 0 40 GAIN 20 0 40 GAIN - 10 10 60 40 M L 20 0 40 GAIN - 10 10 60 40 M L 20 40 GAIN - 10 10 60 40 M G Rig - 10 10 MONO INPUT CHANNEL 1&2 HPF HPF HPF 60 40 M G HPF 0 HF -15 500 650 +15 1k 200 f 2k 3k MID 120 4k HF HF EQ HF HF The HF (High Frequency) equaliser affects the frequency re-15 sponse of the higher audible frequencies.
0 20 0 40 GAIN 20 0 40 GAIN - 10 10 60 40 M L 20 0 40 GAIN - 10 10 MONO HPF 60 40 M L - 10 10 20 40 GAIN 60 40 M G - 10 10 INPUT CHANNEL 1&2 HPF HPF Rig 60 40 M G HPF 0 HF HF -15 500 650 HF -15 +15 1k 500 200 200 f 2k f 3k MID 120 4k MID 120 HF 5 -15 FX send This controls the level of signal that is sent to the effects -15 is post-level +15 +15 The signal +15 processor from -15 the channel.
MONO INPUT CHANNEL 3 & 4 Hi Z input The only difference between mono inputs 1-2 and 3-4 is Left or other instruments. the Hi Z inputs for guitars Mic Mic GTR 1 GTR 2 0 40 Hi Z 20 0 40 GAIN 60 40 M L Standard 1/4” (6.25mm) Jack socket for unbalanced line level signals or instrument pickups. Wired Tip=Hot(+), Right Ring=cold (-), Sleeve=Chassis.
STEREO INPUT CHANNEL 1 ST-1b Inputs Standard RCA Phono sockets for unbalanced line level stereo signal sources from equipment such as CD players, sound modules or MP3 players. If your MP3 player has a mini jack socket (most common) use a stereo mini jack plug to 2 x RCA Phono lead. Left Right ST-1a Inputs Standard 1/4” jack sockets for line level stereo signals.
0 5 -15 STEREO INPUT CHANNEL 1 +15 FX send This controls the level of signal that is sent to the effects processor from the stereo channel. The signal is post-level which means it is affected by the channel Level control (so it stays in proportion to the signal going to Mix) and the send control has 6dB gain fully clockwise. There is no master level control for the FX bus.
STEREO INPUT CHANNEL 2 ST-2 Input The USB audio input is connected through the break contacts of the standard 1/4” (6.25mm) jack sockets. Plugging into the jacks will override the USB input, so if you want to use the ST-2 channel for the USB input signal, make sure nothing is plugged into the jack sockets.
TAP ZED-FX EFFECTS PROCESSOR 1 Dly+verb (level) 9 Plate (decay) 2 Dly+verb (size) 10 Plate (predly) 3 Dly+verb (regen) 11 Plate (colour) 4 12 Hall1 (size) PingPong(regen) 5 BeatDly (regen) 13 Hall2 (size) 6 Ambient (echo) 14 Arena (size) 7 SlapVerb (size) 15 Flanger (dpth) 8 DoubleZED(size) 16 Chorus (dpth) Bank 9-16 PARAMETER (HOLD) TAP FX to AUX 0 +6 FX Bank LED. The Bank LED illuminates when one of the effects type 9 to 16 is selected.
ZED-FX EFFECTS PROCESSOR Effects Type List & Description. There are 16 different effects presets in the ZED Effects Processor. Each is fed with a mono signal from the FX bus, and the output from the effects processor is in stereo. Each preset has a parameter adjust control which is matched to the preset.
MASTER SECTION Main Mix Out XLR connectors StandardLeftXLR output connectors Left for the main stereo mix. Impedance balanced to aid interference rejection. A recessed switch on the rear panel reRight Right duces the level by 30dB if it is required to submix these outputs into the XLR inputs of another mixer. c 2 20 Left USB Main MixLeftInsert jackLeft sockets Standard 1/4” (6.25mm) jack sockets wired: USB IN L Tip = send, Ring = return, Sleeve = Chassis.
MASTER SECTION Stereo Meters 12 Segment LED meters with fast attack (4mS) and medium decay (1S). The meters display the signals selected by the Phones Select switches, or the mono Listen signal (PFL) if activated by any of the Listen switches. O/P Level Switch FX OUT AUX OUT +16 +9 +6 +3 0 -3 -6 -9 -12 -16 -20 -30 0 LEVEL +10 L Phones Monitor Source PFL (Pre-Fade Listen) active LED A red LED to indicate a Listen switch has been pressed on one of the channels.
CONNECTING TO A COMPUTER USB lead type A to B Mic Mic Mic Mic Line Line GTR 1 GTR 2 Hi Z O/P Level Switch Left Left Left Right Right Right Hi Z USB Left Left Left Right Right Right USB IN L 20 0 40 20 0 40 GAIN - 10 10 60 40 M L 20 0 40 GAIN - 10 10 60 40 M L HPF 20 USB IN R 40 GAIN - 10 10 60 40 M G HPF - 10 10 HF 0 HF 5 -15 -15 500 650 -15 +15 1k 500 200 650 -15 +15 1k 500 200 f 2k 120 4k 650 2k 120 4k 500 2k 650 +15 1k f +15 2k
APPLICATION DRAWING—LIVE MIXING GAIN - 10 10 -15 -15 120 200 500 -15 HF f LF MID FX AUX 1k HPF 0 0 3k 2k 650 +15 4k +15 +15 +6 +6 0 20 500 -15 120 -15 -15 PAN AUX FX LF MID 200 f HF - 10 10 GAIN Hi Z Mic 40 Mic 1k HPF 3k 2k 650 +15 4k +15 +15 0 0 0 20 Mic 500 -15 200 120 -15 -15 +6 +6 Hi Z Mic 40 GTR 2 0 20 GAIN - 10 10 HF f LF MID FX AUX PAN 60 40 M G GTR 1 40 1k HPF 0 0 3k 2k 650 +15 4k +15 +15 +6 +6 PAN 40 1k
APPLICATION DRAWING—STUDIO RECORDING GAIN - 10 10 500 -15 HF 120 200 f -15 -15 MID LF FX AUX 1k HPF 0 0 3k 2k 650 +15 4k +15 +15 +6 +6 0 20 500 -15 120 -15 -15 PAN AUX FX LF MID 200 f HF - 10 10 GAIN Hi Z Mic 40 GTR 2 1k HPF 650 +15 2k 3k 0 0 0 20 Mic 500 -15 4k +15 +15 +6 +6 Hi Z GTR 1 40 Mic 0 20 GAIN - 10 10 HF 120 200 f -15 -15 MID LF FX AUX PAN 60 40 M G Line 40 1k HPF 0 0 3k 2k 650 +15 4k +15 +15 +6 +6 PAN
WIRING INFORMATION PROCESSOR Insert cable wiring RETURN S INSERT T OUT T R S R SEND GROUND RETURN SEND S T R IN LINK RING TO SLEEVE TO UNBALANCE General Wiring Information Y-Adapter Y-Adapter 2 Outputs to 1 Input RCA PHONO CABLE RCA phono jacks 1 Output to 2 Inputs adapter UNBALANCED No ! UNBALANCED INSTRUMENT CABLE UNBALANCED BALANCED TRS JACK CABLE BALANCED Sleeve=ground Sleeve=ground Ring=cold (-) Ring=cold (-) Tip=hot (+) TO INPUT Yes Tip=hot (+) 2=hot (+) 1=ground
See more products from ALLEN & HEATH at: www.allen-heath.com Large Live Sound mixers — iLive digital, ML and GL Series Small Format Live Sound mixers — ZED, MixWizards and PA Series DJ products — Xone Series Sound Management Series — iDR Series Registering your product Thank you for buying the Allen & Heath ZED-10FX mixer. We hope that you are happy with it and that you enjoy many years of faithful service with it. Please go to www.allen-heath.com/register.