AI 027620

r:o
ructions f
ton Ins
mbly & Installati
esAs
Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.
2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.
3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.
Step 1. Fix part #4 to part #5 by using flat screw .
Finally,check the installation,thecrystal hanging
on the iamp body.
Step 3.
Step 4.
Install E12 bulbs bulb,do not use
bulbs that exceeds 40W.
Step 2. Fix part #2 to part #5 by using screw .
40W Bulbs
5-M
ain body
C20-16-06-00C20-16-06-00C20-16-06-00 C20-16-06-00 C20-16-06-00
C10-12-04-00 C10-12-04-00
C20-16-06-00C20-16-06-00 C20-16-06-00
C10-12-04-00 C10-12-04-00
1-Screw
2-Fabric shade
3-Flat screw
4-Slat
027620 6-Light wall lamp
e AssemblyFixtur