Users Manual

ManualsBrandsALINCO ManualsElectronicsVHF FM MOBILE TRANSCEIVER

FRON T VIEW

Primary Functions

1 Power turns ON / OFF when ever power suppl y switch is pressed.

2 Volume knob Adjusts the volume level.

3 Dial Chan ges th e fr equency, memor y channel and

4 FUNC/SET Sets in the function mode to access ever y fun ction

5 V/M/MW Switches between VFO mode and memory mode.

6 MHZ/SHIFT Chan ges th e fr equency in 1 MHz steps.

7 TSDCS/LOCK Sets the tone squelch and DCS settin g.

8 CALL/ H/L Switches to CALL mod e.

9 SQL/D Sets the squelch level

10 DATA Terminal Used in clone and burglar alar m functions.

11 TX Light indicator Lights on during transmission.

12 Mic. Connector Connects the attached microphone.

Function s which can be activated wh ile F appears, after pressing th e FUCN Key.

4 FUNC/SET Confirms selection of other functions an d exits

the fun ction mode.

5 V/M/MW Write in to memor y channel.

6 MHZ/SHIFT Sets the shift settin g and the offset frequency.

7 TSDCS/LOCK Sets the key lock function.

8 CALL/ H/L Switches between HI, MID, and LOW power transmission.

9 SQL/D Accesses the 9600 bps packet an d communication mode.

Function s that can be activated wh ile pr essing the FUNC Key

1 PWR Reset all the setting data

5 V/M/MW Erase the memory.

6 MHZ/SHIFT Switches to wide / n arrow mode reception.

7 TSDCS/LOCK Sets the auto dialer.

8 CALL/ H/L Accesses the clon e function mode.

9 SQL/D Accesses the power supply voltage in dication mode.

Function s that requir es continuous pr essing to be activated.

4 FUNC/SET When press with in 2 seconds, it accesses the set mode

9 SQL/D When pr ess within 1 second, the monitor function works on.

4 5 612

Summary of content (7 pages)

PAGE 1
FRONT VIEW 10 11 2 06 1 12 4 5 6 7 8 9 3 Primary Functions 1 Power turns ON / OFF whenever power suppl y switch is pressed. 2 3 Volume knob Dial Adjusts the volume level. Changes the frequency, memory channel and 4 5 6 FUNC/SET V/M/MW MHZ/SHIFT Sets in the function mode to access ever y function Swit ches between VFO mode and memory mode. Changes the frequency in 1 MHz steps. 7 8 9 TSDCS/LOCK CALL/ H/L SQL/D Sets the tone squelch and DCS setting. Swit ches to CALL mode.
PAGE 2
DISPLAY 19 18 17 16 15 14 13 12 11 10 9 1 2 3 1 2 3 4 5 6 SQL M 88 .Decimal point .Decimal point .Decimal point 7 8 9 8888888 BUSY S-meter 10 * 11 12 13 14 15 16 17 18 19 * DCS TSQ +A Nar Lo Mi F 4 5 6 7 8 Appears when setting the squelch level. Appears when in me mory mode Indicates the me mory no. in me mory mode Appears when setting the burglar alarm function. Appears when setting the decimal point of skip level. Indicates the deci mal point of frequency and the sca nning move ment.
PAGE 3
MICROPHONE 2 1 2 1 7 3 4 L OC KDT MF 6 7 3 5 OFF OFF L OC K DR-06T No. 6 OFF Option Key 1 UP key 2 DOWN key 3 PTT k ey 4 DTMF keys 5 DTMF ON/OFF switch / Key Light ON/OFF switch 6 UP/DOWN lockout switch 7 MIC Mic.
PAGE 4
REAR VIEW 2 1 1 Antenna Connector Connection for 50 ohm coaxial cable and antenna. 2 DSUB9 Connector Terminal where market a vailable TNC is being connected during pa cket use. 3 5 4 3 External Spea ker Terminal Terminal for market a vailable external speaker. 4 External Input Power Supply Terminal Terminal for connecting optional EDC-37 which works as an AC power supply when switch on. 5 DC Power Suppl y Cable Please connect it in a 12V DC power suppl y or DC batter y.
PAGE 5
SAFETY TRAINING INFORMATION energy levels and evaluation of such levels for exposure to humans: Your Alinco Incorporated, Electronics Division radio generators RF electromagnetic energy during transmit mode.
PAGE 6
adhere to the following guidelines: Division radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such � DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio.
PAGE 7
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna of the product, under normal use condition is at least 139.