Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix J: Client: Alinco, Inc. Model: DJ-X30T/DJ-X30K Standards: FCC 15.121 & IC RSS-215 Report: 2006207 Manual Please see the following pages.
WIDE BAND COMMUNICATION RECEIVER DJ-X30T/E/K Instruction Manual Thank you for purchasing your new Alinco receiver. This instruction manual contains important safety and operating instructions. Please read this manual carefully before using the product and keep it for future reference.
NOTICE / Compliance Information Statement NOTICE / Compliance Information Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTICE / Compliance Information Statement Conformity Information Alinco, Inc.
Warning Warning To prevent any hazard during operation of Alinco's radio product, in this manual and on the product you may find symbols shown below. Please read and understand the meanings of these symbols before starting to use the product. Danger This symbol is intended to alert the user to an immediate danger that may cause loss of life and property if the user disregards the warning.
Warning Use of this product may be prohibited or illegal outside of your country. Be informed in advance when you travel. The manufacturer declines any responsibilities against loss of life and/or property due to a failure of this product when used to perform important tasks like life-guarding, surveillance, and rescue. Do not use multiple radios in very close proximity. It may cause interference and/or damage to the product(s). Risk of explosion if battery is replaced with an incorrect type.
Warning ■ About power supply Use only appropriate, reliable power supply of correct voltage and capacity. Do not connect cables in reverse polarity. It may result in electric shock, fire and/or malfunction. Do not plug multiple devices including the power supply into a single wall outlet. It may result in overheating and/or fire. Do not handle a power supply with a wet hand. It may result in electric shock. Securely plug the power supply to the wall outlet.
Warning Caution ■ Environment and condition of use Do not use the product in proximity to a TV or a radio. It may cause interference or receive interference. Do not install in a humid, dusty or insufficiently ventilated place. It may result in electric shock, fire and/or malfunction. Do not install in an unstable or vibrating position. It may result in electric shock, fire and/or malfunction when/if the product falls to the ground.
Warning ■ Ligntning Any person is not safe outdoor during thunderstorm and lightning. This condition is getting worse if somebody keeps a hand-held radio; chances of being hit by lightning are doubled since lightning may hit a radio antenna as well. At this time, there is no hand-held radio having any kind of protection against lightning current (which is higher than 10 kA.). Note also that no car provides adequate protection of its passengers or drivers against lightning as well.
Introduction Introduction Thank you very much for purchasing this excellent Alinco receiver. Our products are ranked among the finest in the world. This radio has been manufactured with state of the art technology and it has been tested carefully at our factory. It is designed to operate to your satisfaction for many years under normal use. PLEASE READ THIS MANUAL COMPLETELY TO LEARN ALL THE FUNCTIONS THE PRODUCT OFFERS.
Table of Contents Table of Contents 1. Features… ………………………………………………………………… •• 2. Accessory List… …………………………………………………………… •• 3.
Table of Contents 6.
Table of Contents 8-2-19 Set Mode cancel time setting… ……………………………………………………•• 8-2-20 Write-protect (memory protection) function setting………………………………•• 8-2-21 Skip-scan Operation setting…………………………………………………………•• 8-2-22 Wild Key assignment setting… ……………………………………………………•• 8-2-23 Function assignment for remote controller buttons………………………………•• 9. Channel Display Mode… ………………………………………………… •• 10.
1. Features 1. Features 1 The DJ-X30 is a multifunctional receiver which receives a wide range of radio signals from low-frequency (LF) signals to ultra-high-frequency (UHF) signals. It provides the following features: 1 Receives a wide range of frequencies - between 0.100 and 1299.995 MHz - including aviation radio and business communication frequencies. 2 Built-in bar-antenna receives AM radio and shortwave broadcasts, eliminating the need to attach an external antenna.
2. Accessory List 2 2. Accessory List The package of the DJ-X30 contains the following items. Check that all items are included in your package before using the receiver.
3. Using Accessories 3. Using Accessories 3-1 Attaching/Detaching the External Antenna 1 Hold the antenna at its base 3 and slowly rotate it clockwise (to the right). When you cannot rotate the antenna further, check that it is securely attached to the receiver. 2 To remove the antenna, slowly rotate it counterclockwise (to the left). 3-2 Attaching the Belt Clip 1 Align the belt clip with the Belt clip groove at the rear of the receiver.
3. Using Accessories 3-3 Attaching the Hand Strap 1 Attach the hand strap by 3 Hand strap drawing it through the hole on the belt clip as shown in the figure. 3-4 Changing the Key Cover and Related Precautions 1 Be sure to turn OFF the receiver before starting the following steps. 2 View the receiver from the front, and remove the four screws shown in the figure. Be careful not to lose the screws. (The package of the DJ-X30 includes spare screws as insurance against the loss of the screws.
3. Using Accessories 5 Place the rubber sheet. 3 6 Place the key cover. 7 Secure the cover with the four screws you removed previously. Be careful not to overtighten the screws as this may damage the cover. 3-5 Installing Batteries and Related Precautions 1 Release the lock of the battery compartment cover and open it. Be careful not to lose the cover. (2) (1) 2 Insert two batteries (included), checking that they are orientated correctly with the + and - indicators inside the compartment.
3. Using Accessories 3 Close the cover and lock it. Check that the cover has closed securely. 3 Other than the included Ni-MH battery pack, the DJ-X30 can also be used with AA-size alkaline dry cell batteries or similar commercially-available batteries. (1) (2) ● Battery indicator When the remaining battery power becomes low, the icon appears on the LCD. When the power decreases further, the icon changes to .
3. Using Accessories ● Prevent Short Circuiting the Battery Pack Be extra cautious when carrying the rechargeable battery pack; short circuiting will produce surge current possibly resulting in fire. 3 DON’ T carry with metals of any type, e.g. chains. DON’T carry the battery pack inside bags made of conductive materials. Do enclose inside a non-conductive enclosure. (bags or handkerchief made only of non-conductive material) DON’T place in the proximity of metals or conductives, e.g. nails, chains.
3. Using Accessories 3-7 Using the Optional Trickle Charger and Related Precautions 3-7-1 Connecting the trickle charger 3 AC adapter (EDC-139) 1 Insert the plug of the AC adapter into the DC jack on the rear of the trickle charger. 2 Plug the AC adapter into a wall outlet. Trickle charger (EDC-154) Plugs into DC jack. 3-7-2 Charging the battery pack 1 Install the Ni-MH battery pack in the receiver.