29 Press PTT to complete and go back to operate. 96 223.
23.500 Although DJ-G29T has been programmed with appropreate modulation mode according to the standard band-plans, the transmitting modulation mode can be selected manually. Available modes are NFM (narrow FM) and FM only.
Two different selective-calling tones, CTCSS (PL) and DCS, are available. the receiving signal has been set with CTCSS tone. 223.
open. 223.
87
223.500 915.000 223.500 915.
223.500 223.400MHz 223.420MHz 223.440MHz 223.600MHz 223.580MHz 223.560MHz 223.460MHz 223.540MHz 223.480MHz 223.520MHz 223.
90
5kHz, 6.25kHz, 10kHz, 12.5kHz, 15kHz, 20kHz, 25kHz, 30kHz, 50kHz, 100kHz, 125kHz, 150kHz, 200kHz, 500kHz and 1MHz 223.500 5kHz The microphone gain can be adjusted in four steps. The modulation depth can be affected by the volume at which the operator is speaking and by adjusting the distance between the operator’s mouth and the microphone.
Please program at least 1 priority-memory in advance.
range 223.
XBR(Cross Band Repeater) Mode G29T G29T Cross Band Repeater is prohibited when MAIN and SUB are set for Same band.
902MHz G29T.
and hold for a second, 223.500 915.000 223.500 915.
“Program scan mode (P.36)” 90 is 223.
Single All 223.500 Single All Press either a to stop scanning.
223.500 223.
9-7 or
