223.500 915.000 223.500 915.000 (FM and NFM).
23.500 915.
223.500 915.
94 94 94
223.500 915.000 233.500 915.000 Another way to switch 222 and 902MHz band is to rotate the upper dial while pressing and holding the or the key. 223.500 915.
G29T Program scan mode Program scan This mode is for tuning in selected channels within a set scan range. You must first register date in the program scan bank in 40 order to perform the following operations.
232.000MHz 915.000MHz, 3: 232.100MHz 4: 915.
Mode Program scan mode. Rotate the upper dial and select the Program scan bank. receiver 222MHz band: from 216.000MHz to 249.995MHz 902MHz band: from 902.000MHz to 927.995MHz receiver 222MHz band: from 216.000MHz to 249.995MHz 902MHz band: from 902.000MHz to 927.995MHz 223.
When transmitting with the operating frequencies set in 222MHz 222MHz or 902MHz - 902MHz bands, [RX disabled] will appear on the display and reception will stop on the sub band temporarily. Operating the full-duplex without using an optioned earphone microphone or an earphone may cause howling. Please refer P.80 “Full-Duplex” setting in the set-mode and select “prohibited” parameter to avoid this.
