Basic Operation 4.CTCSS/CDCSS CTCSS/CDCSS signaling is mainly used to avoid receiving irrelated signals on the same channel. If CTCSS/CDCSS signaling is set, it can only receive the calls of those who share the same channel and have the same CTCSS/CDCSS signaling, but if CTCSS/CDCSS signaling is not set, you will receive all the calls on the channel. Press " " key, group number flashing display; switch button select group number is determined. Note: 1.
Basic Operation 5.VOX function With this feature, transmitting opeartion is launched by the voice you said without having to press the " " botton. It become to receive state automatically after you talk. Press " " " key first, enter the function menu, and then press the " And then press " " " key and " key to select VOX function. " key into this function can be set up, and then press " " key to select 1-5 sensitivity, press " " key to confirm.
Basic Operation 6.DW function You can set two channels you need to receive state at the same time, no matter which channel information all can talk.After the call, you can return to the state of "DW". 2 you need to channel can be set to receive state at the same time, no matter which channel information can be fired. After the completion of the finished, can be restored to the DW.
Basic Operation 7.SQL function In setting the level of SQL(that is, to eliminate the noise level), generally choose 3 grade. OF state, when receiving ,it often have noise. Please do not set OF state, if you want to eliminate the noise. Press " " key, enter the function menu, and then press " key selected SQL function, and then press " Press " " key and " " " key into function set. " key confirm. Note: Set the SQL function as "OF",the channel to receive all sound in "GROUP" mode. 8.
Basic Operation 9.KEY TONE function Key tone can set to open or close. Press " " key, enter the function menu, then press " selected KEY TONE function, and then press " Press " " key and " Press " " key to confirm. " key or " " key " key into the function set. " key, selecting ON/OF It shows symbols, means the KEY TONE is open state 10.Roger tone function After transmitting, loosen PTT key has to be done to transmit prompt. Tell your parter the trammitting is complete.
Basic Operation 11.APO function Within the scope of the set time, it will cut off power supply if you do nothing. In order to prevent forget to turn off the power and the function of the design. Press " " key, enter the function menu; then press " select APO function, then press " Press " " key and " Press " " key to confirm " key or " " key to " key into the function set.
Basic Operation 13.CALL TONE Function 1.Pressed PTT twice quickly, it will have CALL TONE syllable. you call the other party; 2.Warning each other to be ready to launch on the phone. 3.There are 5 CALLTONE to be choosed.So you can set different CALL TONE sounds against each other . Set the CALL TONE sound method: 1.
Set Mode Set Mode Selection content Function key F key CODE “ APO “ Rog “ KEY tone “ SCRM “ SQL “ DW “ 26 F key Operation method 01-105/OF Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu 01-06/OF Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu ON/OF Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu ON/OF Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu ON
Set Mode Set Mode VOX “ CALL F key 01-05/OF Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu 01-05 Press the “ ” or “ ” key to select, Press the “ ” to save and back to previous menu ” key F key END 27
Maintenance and Reference Maintenance and Reference Trouble Shooting 1.Issues: Solutions. 2.No power: Batteries has ran out, pls recharge! If the charge without electricity, possibly is the service life of batteries.Please replace the battery!(generally rechargeable times: about 300 ~ 500 times) 3.No receiving: You hold PTT, please loosen it. 4.No voice: the volume is too low, pls adjust higher! Group number are inconsistent, please change same. 5.
Maintenance and Reference Maintenance and Reference 1.Please do not carry directly antenna external microphone and headset. 2.With a lint-free rag wiping the dust and stain of interphone trying to prevent poor contact. 3.Please take out the batteries when you don't use it. 4.Please use neutral detergent to clean it when the buttons and shell of interphone is dirty after long times to use.
Maintenance and Reference Maintenance and Reference Resetting When you reset the unit, all settings are returned to the initial factory settings. ① Turn on the unit with the keys and switch pressed together. ② All the icons appear on the display. ③ Release the volume key, press the Release the 30 key, the display will appear. key, the display will disappear.
Maintenance and Reference Maintenance and Reference Optional accessories ・EBP-90 ・EBC-40 ・EDC-200 ・EDC-201 Li-ion Battery Pack (DC 3.7V 1000mAh) Belt Clip AC Adaptor AC Adaptor ・EME-24 Earphone Microphone ・EME-61 Earphone Microphone with VOX ・EMS-60 Speaker microphone Recommened installation of earphone microphone Earphone Use a clip to fix with collar Clip the PTT unit closer to your mouth Carry the radio on the side or the back of your body, and the cable should go around the back as shown.
Specifications and parameters: Specifications and parameters: Device number DJ-FX45 Frequency range 462.5625-462.7125MHz 7groups 467.5625-467.7125MHz 7groups RF power output 0.5W(ERP) CTCSS/CDCSS 50CTCSS/105CDCSSS Frequency stability ±2.5ppm Rx Sensitivity -9dBu EMF Power supply 3.
CTCSS CTCSS 50 Group of CTCSS Frequency(Hz) 105 Group of DCS Codes 33
Yodoyabashi Dai-bldg 13F 4-4-9 Koraibashi, Chuo-ku, Osaka 541-0043 Japan Phone: +81-6-7636-2362 Fax: +81-6-6208-3802 http://www.alinco.com E-mail:export@alinco.co.jp Copyright Alinco, lnc.