oa Tonsure quality of signal reception; the centenarian should be vertical the RC model. When operating, careful to avoid pointing an antenna directly at the receiver. DO NOT grip transmitter antenna during operation se this will weaken the quality and intensity of radio transmission resulting in loss of control, AHEAD SOLDERER BEEN BENT FRESHENER RIE SR REEVE ARES CRATERS NAS DUNN SRE E Re RRM RR EN The indicator LED "HY will solid green it when it's on.
IMPORTANT! In order to maximize the performance and enjoyment of the ALIGN ATI GET transmitter, please read this section carefully and completely. To ensure signal deception quality.
The status indicator shows current battery voltage and work status of the receiver. HERS STIRRER ERST EER TER Status Cylindrical LED Of Oar disconnected. RESTS Lo Hus R RES Red Solid Light: | Power on and working, REVELER ELDERBERRY Beware Fast Flashing Binding HE ERE EE RA Flashing Slowly The pairing transmitter is off or loss of signal. made EXEGESES Ral BEEN 1. Afer the linking is done, please eve i tha receiver to be linked is really under the control by the ir i 2.
GETTING STARTED EIR He tore operating, make sure to follow the Instruction fo install the battery and connect the system. TERR ERE RR aE TRANSMITTER CHARGING NOTICE INTERBRED Please follow below steps for transmitter battery checking : BRB FL SRE ERNA 1. Power on ALIGN ATS GBT transmitter SIGNALIZATION CET EmE RNY 2. Chick the battery Indicator on the LGD monitor plodded Canaan TER LORE RER charge the battery wham battery power under 209%. TEV BENIN ER REE 3 Confirm the device is firmly compacted.
TX/RX BINDING Bas/mleaan The transmitter and receiver are bound In factory Please follow ihe instructions if you use other transmissible and receiver: 1: Place transmitter & receiver within 1 meter range: 2. Power on transmitter. Two methods for RX binding: Binding via APE interface or press binding attribution the transmitter, Binding method I: Open A13 GET APR system; connect to Bluetooth, press "Bind" Boston on APE and power bn RX to start binding.
3. Receiver connect with binding key with power, AGB receiver get into process of binding. 4. Power on BX and complete binding, then RX LED rad solid light: 5. Check transmitting, RX and model ype works properly. Any question; please repeat binding process and above steps again. SBE Pea ae aay ABE ICES ene Roa RARER E cone Ras BURG UBR ER Sheen R BRN SERENER LE (Ua REIN TORRENT. Solid Rad Li here Forward Bunion The monitor will show Danae receiver signals and binding connection status after completion.
ATI GST TRANSMITTER'SETUP HARRIER ots A153 GET transmitter is lashed 10 the latest Stemware version in factory Visit Align at www allegorical tw for ore news and firmware updates: Please scan OR Cara for link [0 ALIGN website to find related software, or search! ALIGN ATS in IGS 1 Android app store. AT GEYSER GUN IRE BRE REORIENT OR EEN RIE SNE ES BRE « BE OR Code SEIGNEUR THEE REFINER + inl Rosalinda App store BEE ALIGN ATS" © nation com. w/A LS] Recommend to Use inches laptop for sy Bowman larvae TH.
After bucktooth connected, select [ A13 GST Transmitter Sat lip} to ATI GBT Setup Homepage: li displays the Home Page with valuable information including model type, flight mode: neutral point adjustment binding, timer accumulated lime transmitter battery and signals. ele.
ATI TRANSMITTER FEATURES INTRODUCTION AUSTERER TESTER Enter ATA GST homepage; it shows current model mode and flight mode. Also it provides hotkeys for "Bind” & "Tinkerer. For more advanced settings, please click "System Setup” or “Function Setup” to enter the menu for details.
MODEL SELECTION MODEL TYPE BRL Goa 1) Mabel Selection : Allow to save 20 sets of parameter settings and model types (MO1~M20). Also allow to rename nosy save ar sadist the settings. 2) Model Type: Shows current model name and allow to rename it. HEGEL ORE PEER REED TRIBE (M0120) SRE BEES Seas ERT ESTERS RRR PY EE Mabel MOT raters "ALIGN E14". Model M02 refers "ALIGN G1. Mabel MOS refers "ALIGN M470", Modal M04 refers "ALIGN M690".