Quick Installation Guide

Alien Technology Corp.

18220 Butterfield Blvd.

Morgan Hill, CA 95037

Tel 408-782-3900

Fax 408-782-3910

http://www.alientechnology.com

8102092-000 Rev A

Reader antennas should be positioned so that personnel in

the area for prolonged periods may safely remain at least 23

cm (9 in) in an uncontrolled environment from the antenna’s

surface. See FCC OET Bulletin 56 “Hazards of radio

frequency and electromagnetic fields” and Bulletin 65

“Human exposure to radio frequency electromagnetic fields.”

To operate the reader and the Alien RFID Gateway demo

software you will need the following:

• PC running Windows® 98 or higher, with minimum 200

MHz speed, and 128 MB RAM

• Minimum of 45 MB of available disk space

• Ethernet connectivity

• CD-ROM drive

• 120/220 VAC standard power outlet

Cautions & Warnin

stem Re

uirements

ALIEN TECHNOLOGY

QUICK

INSTALLATION

GUIDE

ALR-9650

December 2007

PAGE 1
Cautions & Warnings! Reader antennas should be positioned so that personnel in the area for prolonged periods may safely remain at least 23 cm (9 in) in an uncontrolled environment from the antenna’s surface. See FCC OET Bulletin 56 “Hazards of radio frequency and electromagnetic fields” and Bulletin 65 “Human exposure to radio frequency electromagnetic fields.
PAGE 2
Quick Hardware Installation 1. 2. Quick Software Installation Place the PC, reader, and secondary antenna (if used) on a tabletop near an AC outlet. 1. Quit all applications/programs currently running on your PC (except Windows Explorer). CAUTION: Set up the reader and antenna so they are at least 9 inches away from the any person who will be in range of the RF signal for prolonged periods. (See full FCC caution on back page.) 2. Place the Alien CD in your CD drive. 3.