Alien Technology, LLCALIEN® ALR-H450Handheld TerminalUser Manual
Alien Technology, LLCALIEN® CATALOGUE Chapter 1 Getting Started .......................................................................................................... 3 Chapter 2 About The Device ..................................................................................................... 5 Chapter 3 Call Function ............................................................................................................ 8 Chapter 4 Barcode Reader ...............................................
Alien Technology, LLCALIEN® Chapter 1 Getting Started 1.1 Brief Instruction ALR-H450 is a series of Android powered smart terminals, with data capture, data processing, wireless communication. It is with high-reliability & high-expansibility. Auto & Accurate data collection is achieved in various business fields via a complete solution of premium options, the flexible solution among options and operators is suited-up.
Alien Technology, LLCALIEN® Routinely check the battery’s charge status. Carefully monitor batteries that are approaching the end of their estimated life. Consider replacing the battery with a new one if you note either of the following conditions: The battery run time drops below about 80% of the original run time. The battery charge time increases significantly.
Alien Technology, LLCALIEN® Chapter 2 About The Device 2.
Alien Technology, LLCALIEN® Buttons: Button Function 1. Power Button Press and hold to turn the device on or off 2. App List View Button View a list of apps running 3. Home Button Press to return to the home screen 4. Cancel Button Tap to return to the previous screen 2.2 SD Card Installation Detailed installation steps are as follows: 1. Open the SIM slot as the direction of ‘Open/Lock’ labeled; 2. Open the SD slot as the direction of ‘Open/Lock’ labeled; 3.
Alien Technology, LLCALIEN® 2.3 SIM Card Installation 1. Open the SIM slot as the direction of ‘Open/Lock’ labeled; 2. Install the SIM card correctly; 3. Lock the SIM slot properly; 2 3 2.4 Battery Installation 1. Push the battery down into the bottom of the battery; 2. Push the battery to the direction of the array; 3. Turn the battery lock; 2.5 Battery Charging 2.5.1 Direct Charging Use the adapter to charge the battery via the USB connector of the snap-on;. 2.5.
Alien Technology, LLCALIEN® Chapter 3 Call Function 3.1 Phone 1. Click this icon : 2. Click the number button to input the numbers; 3. Click the button to confirm and dial; 4. Click the to end the calling; Contacts Logs Voice Calling 3.2 Emulated Numeric Keypad Contacts 1. Click ‘Contacts’ to open the contacts list; 2. Click ‘ ’ to add the new contact; 3.
Alien Technology, LLCALIEN® Group Favorites Contact List 3.3 Messaging 1. Click ‘ 2. Click ‘ 3. Click ‘ 4.
Alien Technology, LLCALIEN® Chapter 4 Barcode Reader 4.
Alien Technology, LLCALIEN® Chapter 5 RFID Reader 5.1 Ultra High Frequency 1. Open the UHF demo within Appcenter, and press the ‘Start’ button to start scanning; 2.
Alien Technology, LLCALIEN®
Alien Technology, LLCALIEN® Chapter 6The Other Functions 6.1 PING 1. Open the Ping in Appcenter; 2. Set the Ping parameters and select the internal/external addresses; 6.2 Bluetooth 1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth; 2. Input the content or select the file, then scan the nearby Bluetooth printer and pair them; 3.
Alien Technology, LLCALIEN® 6.3 GPS 1. Open the GPS demo in Appcenter and turn on GPS module; 2.
Alien Technology, LLCALIEN® 6.4 Volume Settings 1. Open the Volume Setting demo in Appcenter; 2.
Alien Technology, LLCALIEN® 6.5 Sensor 1. Open the Sensor demo in Appcenter; 2. Test the sensor based on the requirements; 6.6 Keyboard 1. Open the Keyboarddemo in Handset Appcenter; 2.
Alien Technology, LLCALIEN® 6.7 Network 1. Open the Network demo in Appcenter; 2. Test the WIFI/Mobile signal based on the requirements; 6.8 Keyboard Emulator Keyboard Emulator can be used directly for multiple using environments and the output formats can including prefix/suffix/enter/tap can also be defined, please define the options properly based on the features of the device.
Alien Technology, LLCALIEN® 2) Click the options correctly based on the features of the device hardware, please also press the physical button to define the scan button, then please define the output formats based on the requirements, finally click ‘Open’ to save and enable it ;
Alien Technology, LLCALIEN® FCC Caution § 15.19 Labeling requirements. The 15.19 statement is used. They should have used the one for Licensed devices: “This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user.
Alien Technology, LLCALIEN® comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. FCC RF exposure information (SAR). This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.