Alfred ML2 Installation Guide Professional Installation Recommended ENVELOPER Alfred International Inc. reserves all rights for the final interpretation of the following instructions. A\ All design and specifications are subject to change without notice
INTRODUCTION The Alfred ML2 smart door lock combines a sophisticated and modern design aesthetic with advanced features and durability that is perfect for residential, commercial and multi-family properties. It is easy to use and install and allows you to manage access with up to 250 unique PIN codes and 250 RID access cardsharper. You can program, control, monitor your door lock using the Alfred Home app, and the door position sensor detects whether your door is open or closed.
BEFORE INSTALLATION The Alfred ML2 door lock is compatible with mortise lock produced by different manufacturers: Manufacturer Model Remark Yale TBC Adapter required (sold separately) Schlep L-Series Lawrence LG-8700 Series Sargent 7800/8200 Series Adapter required (sold separately) Cor bin Russ win TBC Adapter required (sold separately) Note: Compatibility table may update time to time, please visit alfredinc.com to see latest compatible models, or contact for more information and assistance.
PREPARE FOR INSTALLATION For New door installation For retrofit installation Refer to installation guide of the mortise lock 1. Bore saw 1" (25mm) 2. Bore saw 3/8" (9.5mm) 3.
Front assembly ahd A: Status indicator(Red) B: Status indicator{Green) €: Touchscreen keypad D: Low battery indicator E: USB-C Emergency Power Port (x2} F: Reboot Button (x2} SPECIFICATIONS Back assembly Wireless module port H: Handing switch I: Reset button J: Internal indicator K: Multi-functional button L: Thumb turn 4/9 Back side of back assembly M: Port for Hard wired power N: Port for Door position sensor ©: Port for front assembly Please note the and poles for the hard-wired DC power!
INSTALLATION 2. Hold the Front assembly (part H) with keypad flush to your door and align cable with door hole prep. 1. Install the door position sensor (part G) in the door edge. Note: The Arrow on Door sensor should point upwards. The door position sensor is optional but recommended for full lock functionality and feature support.
ABLATION 3. Using the ML2 Alignment Tool (Part J), position the mounting plate by first routing the cables and connectors through the mounting plate's cable hole. The alignment tool inserts through the mounting plate and into the thumb turn hole of the mortise lock. 4. Secure both assemblies using installation bolts (part D). Make sure the front assembly and back mounting plate are aligned and square. Tighten screws securely with a #2 Philips screwdriver.
INSTALLATION 5. Attach cables to the back assembly. Note: Door Position Sensor installation is optional but recommended for full lock functionality and feature support. Front assembly cable 7/9 6. Remove back battery cover(remove top screw and gently pull from lower sides of the cover) and secure back assembly using 1/4" mounting screws (part |) onto the mounting plate.
INSTALLATION 8. Install rechargeable battery pack then install 7. Hand the lock by changing position of handing battery cover. switch on back assembly according to your door opening direction.
INSTALLATION 9. Install door sensor magnet on door frame with the arrow pointing upwards. Final mechanical and fitment check: It is important to ensure the fitment and mechanical operation of the lock is working correctly.
Congratulations, you have installed the Alfred ML2 Smart Lock. Please now download the Alfred Home App from either the Apple App Store or Google Play Store to set up your Master PIN Code for the lock or refer to Programming Instructions booklet provided. Download the Alfred Home App FLORES € App Store For support, please reach out to: You can also reach us at 1-833-4-ALFRED (253733) www.alfredinc.