INSTALLATION MANUAL a] SINGLE-LEVER LAVATORY FAUCET ~ ITEM NO.: 06 AB1295** c ® X COMPONENTS CHECKING LIST OF THE STANDARD COMPONENTS: Please double-check the component list hereinafter and contact our company or our distributor for any nonconformity. Remarks: 1, Without affecting their performance, components may be changed without further notice. 2, Drawings for reference only. Product size & shape refer to actual faucet. The Component List | Qty. 8 1 Main body 2 Washer 3 .
% Dimension Drawing 194 127 121 Maxima X Installation Procedures cold water Make a hole of on the basin deck, screw off the nut (6) from the long rod (5), screw the long rod (5) and the inlet pipe (7) onto the main body(1), put the main body into the hole with the washer (2) between basin deck and the main body. 2. Fixing the faucet from downside of the basin deck, with 2-hole washer(3), 2-hole gasket(4) and the nut(6).
\ 3. After adjusting the direction of the main body and base, | 4. Connect the water inlet pipes to the angle valves with fine tightening the nut(8) with a spanner. sealing. ¥ Usage: & Yr How to operate the handle Y Open 1) Raise the handle lever up for opening water, push down to close; Close 2) Tum the handle lever to the left to increase hot water flow to higher water temperature, and lower the water temperature by operating 90° reversely.