User's Manual

ManualsBrandsALFA NETWORK ManualsElectronics802.11bgn AP/Router

AP121U

802.11n AP/Router

Changes to specifications and descriptions may change at any time without prior notice

Features:

• High Speed Data Rates

Providing faster data rates of up to 150Mbps and

is compatible with legacy 802.11b/g equipment

• Advanced Robust Security

Firewall with SPI to protect the internal host from

hacker attacks. Wireless security is

comprehensive and included WPA/WPA2 PSK

• Feature Rich

WDS, Dual SSIDs, Static Routing, QoS and more

Application: on:

Summary of content (4 pages)

PAGE 1
AP121U 802.11n AP/Router Features: • High Speed Data Rates Providing faster data rates of up to 150Mbps and is compatible with legacy 802.11b/g equipment • Advanced Robust Security Firewall with SPI to protect the internal host from hacker attacks. Wireless security is comprehensive and included WPA/WPA2 PSK • Feature Rich WDS, Dual SSIDs, Static Routing, QoS and more Application: on: Copyright 2011 Alfa Networks Inc.
PAGE 2
AP121U 802.11n AP/Router Specification Standard IEEE 802.11b/g/n Operation Mode Router Bridge Wireless ISP Antenna 5dBi detachable antenna Frequency Band 2.400GHz ~ 2.484GHz Data Rate 802.11n ( 40MHz ): up to 150Mbps 802.11n ( 20MHz ): up to 72Mbps 802.11g: 54,48,36,24,18,12,9,6Mbps 802.11b: 11,5.5,2,1Mbps Tx Power 802.11b: 20dBm² 2 802.11g: 20dBm ² 2 802.11n: 20dBm ² 2 Power requirement DC Jack: 12V DC PoE: 12V Passive PoE Security Sensitivity 64/128bit WEP WPA(TKIP with IEEE 802.
PAGE 3
Declaration: This device have no Ad Hoc Mode. System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.
PAGE 4
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.