User Guide English ( 3 – 12 ) Guía del usuario Español ( 13 – 22 ) Guide d’utilisation Français ( 23 – 33 ) Guida per l’uso Italiano ( 34 – 43 ) Benutzerhandbuch Deutsch ( 44 – 54 ) Appendix English ( 55 )
User Guide (English) Introduction Box Contents Concert Digital Piano Music Rest Sustain Pedal User Guide Power Adapter Safety & Warranty Manual Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit alesis.com. For additional product support, visit alesis.com/support. Setup Music Rest Step 1 Step 2 Detail Connection Diagram Items not listed in Introduction > Box Contents are sold separately.
Features Top Panel 1. Power: This switch turns the piano’s power on or off. In order to save energy, the piano will automatically shut down after 30 minutes if it is not used. 2. Master Volume: This knob adjusts the master volume for the Line Output and Headphone Output. Note: The internal speakers will be muted if there are headphones plugged into the Headphone Output.
Quick Start Playing Demo Songs The Concert Digital Piano features 2 demo songs. To play the demo songs: 1. Press and release the Split and Layer buttons at the same time. The Concert Digital Piano will enter Demo Mode and play the demo songs in a continuous loop. The two button LEDs will flash during demo playback. 2. To exit Demo Mode, press and release the Split and Layer buttons again. Playing Voice Demos Each Voice on the panel is preset with a voice demo.
Layer Mode Layer Mode allows for two different voices to be layered together for a fuller and richer sound. To enable Layer Mode: 1. Press the Layer button to enter Layer Mode. The Layer button LED will be lit green. 2. Select the first voice by pressing one of the Voice buttons to choose between its Original or Variation voice. 3. Press the Layer button again. The Layer button LED will be lit red. 4.
Advanced Functions You can change more advanced settings by pressing and releasing the Metronome and Lesson buttons at the same time to enter Advanced Functions Mode. Use the keys that correspond to the graphics below to change your desired setting.
Voice Volume You can set the volume of each voice in Layer and Split Mode by using Advanced Function Mode. 1. 2. 3. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. Use the keys marked Upper Volume 1–5 to change the volume of the upper voice in Layer Mode. 1 is the lowest volume, and 5 is the highest volume. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Transpose This function allows the overall pitch of the piano to be transposed up or down by a maximum of one octave in semitone increments. To change the transposition: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Use the keys marked Transpose + or Transpose – to set the transpose value. Press both keys together to reset the transposition back to the default value of 0. 3.
Effects With the Concert, you can add adjustable Reverb and/or Chorus effects to your sound. To enable the effects: 1. Press the Reverb/Chorus button once to turn on the reverb effect. The button LED will be lit green when only the Reverb effect is enabled. 2. Press the Reverb/Chorus button again to turn off the reverb effect and turn on the chorus effect. The button LED will be lit red when only the Chorus effect is enabled. 3.
Pedal Resonance Pedal resonance is a function that simulates the reverberation of notes when pressing the sustain pedal on an acoustic piano. When you use the included sustain pedal with Pedal Resonance enabled, the Concert reproduces the rich harmonics and unique sound characteristics of an acoustic piano. To turn Pedal Resonance on or off: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2.
Restore Factory Default Settings To restore your Recital to the factory default settings, press and hold the Layer and Lesson buttons for 5 seconds. The following parameters will be reset to their default values: Reverb, Chorus, Metronome Tempo, Metronome Time Signature, Metronome Volume, Upper Volume, Lower Volume, Split Volume, Split Point, MIDI Channel, Touch Sensitivity, and Auto Power Off.
