HPR Series Usage Instructions Page 1 of 11
Regularity Notices and Conformity USA – FCC Information to the user (FCC Part 15.105) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents The Reader ..............................................................Page 4 Equipment Supplied .................................................Page 6 Charging the Reader ................................................Page 6 Connecting the Accessories ....................................Page 6 Switching the Reader On/Off ...................................Page 6 Reading RFID Tags .................................................Page 7 Testing the Unit ..........................................
The Reader Read Button Power Button Battery Charging Indicator Tag Read Indicator Reader Page 4 of 11
Antenna Cable Connector USB Connector Battery Charger Plug Reader End Antenna Desk Stand Attached Page 5 of 11
Equipment Supplied 1. Biomark HPR Unit, (the Reader) 2. Biomark HPR Loop Antenna 3. Fish-Shaped FDX RFID Test Tag 4. AC to DC Adapter (Elpac Power Systems) 5. 2m Antenna Cable 6. 2m USB Cable 7. USB Stick with PC Application 8. Desk Stand 9. 0.5m USB Cable for Memory Stick Charging the Reader Plug the AC charger into the center plug on the end of the Reader. Connect to AC power. The battery charge indicator will light orange while the battery is charging, and change to green once the battery is charged.
Reading RFID tags with the Reader The reading is automatically started when the unit is powered up and stopped by pushing the "Stop" button on the device. The text at the top of the display will toggle between "Reading" and "Standby" when the " Stop/Read" button is pressed. NOTE: If the AC Adapter isn't connected to the unit, a fully charged battery will run flat after approximately 3 hours of continuously being in READING mode.
To Customize Your Reader • Press Stop Key if Reader is in “Reading” mode. • Press Menu key. • Press Up Arrow for Settings.
• Press Up Arrow for Device.
To View Tag Numbers • • • • • Goto Menu. Files. Use Up/Down Arrows to Select File. Press Actions. Pop Box will appear. Using arrow keys select View Tags All Tags in this file will be displayed.
To Delete Tags Use down arrow “Delete”. A message “Are you sure you want to delete Tag File ##?” will appear. This will delete ALL tag numbers in this file. To Copy Tag Numbers to USB Plug USB into cable then plug cable into Reader. Use right arrow to select “Copy to USB”. This will copy all tags in this file to USB. To Copy Tag Numbers to Computer Run the HPR-PC software. Plug Reader into computer via USB port (or Bluetooth). Use left arrow to select “Copy to Computer”.