User's Manual

Equipment tested for
compliance as a
complete unit
WT19303W87
Turning on your tablet for the first time
Tablet docking
Press and hold the Power button 4~5
seconds until the RCA logo appears.
Select the region and language, then tap
and
follow the onscreen instructions to setup the tablet.
Be sure your home Wi-Fi network is turned on and connected to the internet.
To wall outlet
NOTE
The keyboard connects to the tablet via the Connector. When the connection is successful, the tablet will
automatically adjust its settings to use the keyboard.
Remove tablet from keyboard
Power off the tablet
Turn on the tablet in standby mode
Press the Power button to turn on the
tablet screen.
Swipe up the lock screen from
the bottom edge of the display.
Sleep / Standby mode
Press the Power button to turn off the tablet screen.
You can shut down your tablet by doing either of the following:
a. If your tablet is unresponsive, Press and hold the
Power
button until the message "Slide to
shut down you PC" appears.
b. Slide
to the bottom edge of the display, then the
tablet will be completely powered off.
Tap Settings from the Charms bar, then tap
Power
and select Shut down to do a normal shutdown.
Volume +/-
Connector
Use to connect the tablet
to keyboard.
Touch pad
Keys
There are two ways to dock the tablet onto the keyboard.
or
Quick Start Guide
Getting To Know Your Tablet
Windows button
Press to open/close
the Windows Start
screen.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable pro tection aga inst har mful int erfere nce i n a residen tial instal lation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harm ful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
s Reorient or relocate the receiving antenna.
s Increase the separation between the equipment and receiver.
s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
s Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214,
Lockport, NY, 14095, Tel: [phone]) could void the user’s authority to operate the equipment.
CAN ICES-3(B) / NMB-3(B)
Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order to
disconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socket outlet completely.
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be
observed during handling and use.
s Read these instructions.
s Keep these instructions.
s Heed all warnings.
s Follow all instructions.
s Do not use this apparatus near water.
s Clean only with dry cloth.
s Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
s Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce
heat.
s Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
s Only use attachments / accessories specified by the manufacturer.
s Unplug this apparatus during lightning storms or when unused for long periods of time.
s Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY INFORMATION
s The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
s Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet
that may prevent air flow through vent openings.
s Do not place lighted candles, cigarettes, cigars, etc. on the product.
s Care should be taken so that objects do not fall into the product.
s Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.
s To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
s Do not play your headset at high volume. Hearing experts warn against extended high-volume play.
Copyright and Trademark Notices
Intel Inside logo is trademarks of Intel Corporation in the U.S. and /or other countries, Copyright Intel Corporation, 2015. All rights
reserved.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
The
Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names are
those of their respective owners.
About HDMI
High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digital
multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMI
standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audio
output.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice.
This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of
the device.