User Manual 5 Disc Audio System with Bluetooth® wireless technology CD2767BE2 English (EN) Scan for more user manual details It's important to read these instructions prior to using your new product for the first time.
SAFETY PRECAUTIONS FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SAFETY PRECAUTIONS For Your Safety The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If the plug won’t go into the outlet completely, turn the plug over and try to insert it the other way. If it still won’t fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Connect power cord only to AC power source as marked on the product. • Care should be taken so that objects do not fall into the product.
GETTING STARTED Unpacking the system You should have the following: • one main unit (with two speakers) • one remote control • user manual Connections Back view 1. FM pigtail antenna 2. Speaker jacks 1 2 EN Red & Black Red & Black SPEAKERS To an AC outlet Using FM antenna Before you use your audio system, you’ll want to make sure both the FM antenna are positioned properly.
UNIT CONTROLS Unit-Front View 25 1 2 4 EN 6 8 24 3 23 5 7 9 22 11 20 21 10 12 19 13 14 18 15 16 17 1) TIMER To turn the timer on/off; press and hold to enter the timer setting mode. 2) CLOCK To show time and enter clock setting mode. 3) DIMMER To adjust display brightness. 4) SLEEP To select the time interval in minutes before the unit turns off. • PAIR 5) To play or pause CD; to pair the bluetooth. 6) AUTO PROG To enter auto preset program in FM mode.
REMOTE CONTROL Remote Control 1 2 3 4 20 5 19 EN 6 18 7 17 8 16 9 15 10 11 14 12 13 12) BASS To turn BASS on or off. 13) To mute and restore audio output. 14) INTRO/PAIRING To turn INTRO mode on or off to play the first 10 seconds of each track in CD mode, to pair the bluetooth. 15) PRESET To select previous/next tuner preset station. 16) DIMMER To adjust display brightness. 17) STOP To stop playing in CD mode.
REMOTE CONTROL ATTENTION • Remove the plastic sheet before operating the remote control. EN ATTENTION To install batteries 2. Insert one CR2025 (3V) size battery. 1. Open the battery door. Using the Remote Control • Point the remote control at the REMOTE SENSOR located on the unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 13 feet (4 meters).
SOUND FEATURES Bass Boost Press BASS to turn on/off boosting the bass frequency. Muting Audio Press on the remote control to cut or restore the sound. Using Preset Equalizer Curves Press EQ on the unit to select among FLAT, ROCK, POP, JAZZ, CLASSICAL and CUSTOM. The display shows your selection briefly. EN Creating a Custom Curve 1. Press EQ on the unit to select the CUSTOM mode. / to cycle among the displayed BASS and TREB range levels. 2. While CUSTOM is displayed, press 3.
CD PLAYBACK CD-R / RW This unit is compatible with CD-RW/ CD-R discs for playback. Notes on CD-R/RW Disc: • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. • Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc.
CD PROGRAM You can program the CD player to play up to any 20 tracks on the CDs in the tray. 1. While the CD player is stopped, press PROGRAM to enter program mode. The system displays the next available program number: “3- - P 01”, prompts you for the first track in the program list. Note: “3- - P 01” - 3 indicates the No. of the current disc. 2. Press / to select a track. 3. Immediately press PROGRAM to assign the selected track to the program number.
LINE IN Play External Sound through the Speaker System Press SOURCE on the unit repeatedly to select LINE IN mode. Note: Suggest using Ø3.5mm LINE IN jack for MP3 player. TROUBLESHOOTING TIPS EN System will not turn on CD sound skips • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. No sound • Clean the disc. • Check disc for warping, scratches, or other damage.
ADDITIONAL INFORMATION Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD Player CAUTION! This system operates with a laser. It must be opened by only a qualified technician. Handling CDs • Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. Do not affix labels or adhesive tapes to the label surfaces. Do not scratch or damage the label.