User's Manual

Equipment tested for
compliance as a
complete unit
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box
1214, Lockport, NY, 14095, Tel: [phone]) could void the user’s authority to operate the equipment.
CAN ICES-3(B) / NMB-3(B)
CT9603W47
Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order
to disconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socket outlet
completely.
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should
be observed during handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any
heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that
produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
• Only use attachments / accessories specifi ed by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY INFORMATION
• The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases,
shall be placed on the apparatus.
• Always leave suffi cient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or
cabinet that may prevent air fl ow through vent openings.
• Do not place lighted candles, cigarettes, cigars, etc. on the product.
• Care should be taken so that objects do not fall into the product.
• Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.
• To prevent the risk of fi re or electric shock, do not expose this apparatus to rain or moisture.
• Do not play your headset at high volume. Hearing experts warn against extended high-volume play.
Printed in China
Copyright and Trademark Notices
Android, Google, Google Play and other marks are trademarks of Google Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names
are those of their respective owners.
About HDMI
High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition
video and
digital multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required
by the HDMI standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in
no Video or Audio output.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice.
Turning on your tablet for the frist time
Getting to know your tablet
Press and hold the Power button 4~5
seconds.
Select the language, then tap
and follow the
onscreen instructions to setup the tablet.
Be sure your home Wi-Fi network is turned on
and connected to the internet.
Please plug into the supplied AC power supply (wall outlet) to activate the battery before you turn
it on for the fi rst time.
To wall outlet
Power off the tablet
Turn on the tablet in standby mode
Press the Power button to turn on the
tablet screen.
Touch and drag to unlock.
Sleep / Standby mode
Press the Power button to turn off the tablet screen.
Press and hold the Power
button until the
Power off appears and tap it.
The tablet will be completely powered off.
Volume +/-Pogo Pin
Connect to optional keyboard (not included)
Quick Start Guide
USB port
Power
Headphone
jack
Camera
IMPORTANT! Please Read.
We recommend fully charging your tablet before using it for the fi rst time. For optimal operation,
please connect the provided AC adapter to your tablet once the battery reaches 20% charge.
This device complies with Industry Canada License-exempt RSS-210. Operation is subject to the following two conditions: (1)
This device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.