User Manual Alcatel would like to thank you for your purchase. We hope you will enjoy your high-quality mobile communication experience. For more information about your mobile hotspot or to download the complete user manual version, please visit https://us.alcatelmobile.
Table of Contents Getting to Know Your Mobile Hotspot.....................................1 LED Description.............................................................................1 Indicators.........................................................................................2 Inserting the SIM card..................................................................3 Removing the SIM card................................................................4 Inserting/Removing the battery..................
Getting to Know Your Mobile Hotspot Power key WPS key Charging out port LED indicators Charging in port LED Description Part Description Power key Hold the Power key for 3 seconds to power the device on/off. WPS key Hold the WPS key for 3 seconds to activate the WPS function. Once activated, the Wi-Fi LED indicator will flash every two seconds. If the network is not accessed within 2 minutes, device will automatically exit WPS mode. LED indicators Displays Wi-Fi, signal, battery, and SMS status.
Part Description Reboot Hold Power key for 10 seconds to restart device. Indicators When the hotspot is powered on, the following icons will illuminate. For a description of the icons, please refer to the table below: Wi-Fi Indicator (Blue LED) Solid Blue Wi-Fi is active. Flashing Blue WPS mode is active. Signal Indicator (Red or Blue LED) Solid Blue Registered and connected to network.
Battery Indicator (Red or Blue LED) Solid Blue 3 LEDs light up blue: Battery level 80% - 100% 2 LEDs light up blue: Battery level 40% - 79% 1 LED lights up blue: Battery level 15% - 39% Solid Red 1 LED lights up red: Battery level 0% - 14%. Flashing LEDs will flash while charging. Once the battery level is at 100%, 3 LEDs will display solid blue. SMS Indicator (Blue LED) Solid Blue New message Slowly Flashing Blue Message inbox is full. Off No new messages. Software update Fast Flashing Blue 1.
2. Press and push the Nano SIM card to install it in the SIM card slot. Removing the SIM card Do not pull the SIM card out forcefully. Press and hold the flat spring, and then pull the SIM card out.
Inserting/Removing the battery Ensure that the pins on the battery are aligned with the pins on the device before fully inserting the battery. Close the back cover with the loopholes aligned. Charging Your Mobile Hotspot There are two ways to charge your mobile hotspot: 1. Charge using a charger and USB data cable Connect the USB cable into the charging port as shown and connect the charger to a power outlet to start charging.
2. Charge using a computer and USB data cable You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, it takes about 4 hours to complete charging. Note: When red battery indicator lights up, device should be charged in order to protect the battery. Charging other devices Use the full-size USB port to charge other devices, such as tablets and smartphones.
OS supported Windows (32 bit & 64 bit) 7/8/8.1/10 Mac OS X 10.6 to 10.11 with the latest upgrade Connect your Wi-Fi device to your Mobile Hotspot 1. Power on your mobile hotspot. 2. On your computer or other Wi-Fi enabled device, search for available Wi-Fi networks and select network name (SSID) located on the label underneath the mobile hotspot battery. Note: Wi-Fi name (SSID) and Wi-Fi Password is located on the label underneath the mobile hotspot battery.
4. Follow the system prompts on your Wi-Fi device to finish the connection. 5. If no Wi-Fi device is connected within 2 minutes, WPS function will automatically close. Managing Your Mobile Hotspot Accessing Your Mobile Hotspot You can access your Mobile Hotspot device information using an Internet browser. To access using a browser: 1. Connect to your hotspot device through Wi-Fi using the network connection software on your computer. Provide the Wi-Fi network password, if requested. 2.
5. Click Login. If you entered the correct password, the Web User Interface screen appears. Access Using a USB Cable 1. Connect your Mobile Hotspot to your PC using the USB cable. 2. Power on your device. 3. Open a browser and enter http://mobile.hotspot or http://192.168.0.1 in the address bar. The Mobile Hotspot login screen will appear. 4. Enter your Password in the field provided. You can find your default admin password and Wi-Fi password located on the label underneath the mobile hotspot battery. 5.
Change Mobile Hotspot Network Name (SSID) Access http://mobile.hotspot or http://192.168.0.1. Click Settings in the navigation section. Select the Wi-Fi Settings tab. Change the name that appears in the Network Name (SSID) field in the Wi-Fi Settings area. 5. Select or deselect the Broadcast Network Name checkbox to enable or disable broadcasting the hotspot’s Network Name (SSID). 6. Click Apply to save your changes on the Wi-Fi Settings tab of the Settings screen. 1. 2. 3. 4.
2. Select Settings -> Wi-Fi Settings -> Whitelist or Blacklilst of MAC. 3. After initiating the whitelist function, you need to know the user client’s MAC address and add it to the list. The format is XX:XX:XX:XX:XX:XX. The device is capable of connecting up to 16 devices at one time. To maximize connection speeds while multiple users are connected, it is recommended to limit the users to 10 at a time. 4.
Safety and Use We recommend that you read this document carefully before using your mobile hotspot. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Do not switch on your device when its use is prohibited or when using the device may cause interference or danger. Follow rules or regulations in hospitals and health care facilities. Switch off your device near medical devices.
It is recommended that the device only be used in an environment where the temperature is between -10°C and 50°C and humidity level is between 10% to 90%. CONDITIONS OF USE Abide by laws and regulations of wireless device use while on aircrafts. Operational Warnings: Obey all posted signs when using the mobile hotspot in public areas. Follow Instructions to Avoid Interference Problems: Turn off your mobile hotspot in any location where posted notices instruct you to do so.
BATTERY Only use batteries, battery chargers, and accessories recommended by TCL Communication Ltd. and its affiliates and are compatible with your hotspot device. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of alternate chargers or batteries. Your mobile hotspot should not be disposed by way of municipal waste. Please consult local regulations for disposal of electronic products.
Proper Disposal in European Union Countries: Such collection points are accessible free of charge. All products with this sign must be brought to proper collection points. Disposal in Countries Outside of European Union: Equipment with this symbol are not to be thrown into ordinary bins if your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled.
on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for routers employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of routers. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or using “hands-free” devices to keep routers away from the head and body. (fact sheet n°193). Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. Your router is equipped with a built-in antenna. For optimal operation, you should avoid touching it or damaging it. As routers offer a range of functions, they can be used in positions other than against your ear.
(2) the costs for implementing the measures, (3) the risks involved with the processing of the personal data, and (4) the sensitivity of the personal data processed. You can access, review and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request.
Disclaimer Certain variations may be present between mobile hotspot and user manual description depending on software release or specific operator services. TCL Communication Ltd. shall not be held legally responsible for such deviations, if any, nor for their potential consequences, which responsibility shall be borne by the operator exclusively. 12 Month Limited Warranty For Warranty information and support, please visit https://us.alcatelmobile.com/warranty/.
Alcatel is a trademark of Nokia used under license by TCL Communication Technology Holdings Limited. LINKZONE is a trademark of TCL Communication Technology Holdings Limited. © 2021 TCT Mobile Limited. All rights reserved. TCL Communication Technology Holdings Limited reserves the right to alter material or technical specification without prior notice.
