APPLICANT: Alcatel-Lucent USA, Inc. Exhibit 10 FCC ID: AS5ONEBTS-26 EXHIBIT 10: USERS MANUAL § 2.1033 Application for certification. (c) Applications for equipment other than that operating under parts 15 and 18 of the rules shall be accompanied by a technical report containing the following information: (3) A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be submitted if the actual document is not available.
Use pursuant to applicable agreements PRELIMINARY Title page Alcatel-Lucent Remote Radio Head 2X60W - 850, 1900 MHz | UA08.1 Site Preparation NN-20500-305 Issue 0.
PRELIMINARY PRELIMINARY Use pursuant to applicable agreements Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2011 Alcatel-Lucent. All rights reserved.
PRELIMINARY 2 Safety statements 2 Overview Purpose This chapter covers safety precautions. Contents Structure of safety statements 2-2 Safety 2-4 Safety - specific hazards 2-5 Product safety 2-8 PRELIMINARY ...................................................................................................................................................................................................................................
PRELIMINARY Safety statements Structure of safety statements .................................................................................................................................................................................................................................... Structure of safety statements Overview Safety statements describe the safety risks relevant while performing tasks on Alcatel-Lucent products during deployment and/or use.
Structure of safety statements .................................................................................................................................................................................................................................... Signal word Meaning WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
PRELIMINARY Safety statements Safety .................................................................................................................................................................................................................................... Safety General precautions for installation procedures WARNING Failure to observe these safety precautions may result in personal injury or damage to equipment. • • • Read and understand all instructions.
Safety - specific hazards .................................................................................................................................................................................................................................... Safety - specific hazards DANGER Electric-shock hazard Working in severe weather can result in personal injury or death and damage to the equipment.
PRELIMINARY Safety statements Safety - specific hazards .................................................................................................................................................................................................................................... WARNING Laser hazard The light from laser and high-radiance LED's may cause eye damage if absorbed by the retina. In the US consult ANSI Z136.
Safety - specific hazards .................................................................................................................................................................................................................................... CAUTION Laceration hazard The cabinet and the components within may have sharp edges and burrs and contact may cause cuts and lacerations. Beware of sharp edges and burrs, especially when working on areas inside the cabinet difficult to access.
PRELIMINARY PRELIMINARY Safety statements Product safety ....................................................................................................................................................................................................................................
PRELIMINARY 3 Product overview 3 Overview Purpose . This chapter provides an overview of the Alcatel-Lucent Remote Radio Heads: • • RRH 2X60-850 RRH 2X60-1900 Contents Functional description 3-2 Physical description 3-4 Equipment 3-12 Mounting locations 3-13 PRELIMINARY ..................................................................................................................................................................................................................................
PRELIMINARY Product overview Functional description .................................................................................................................................................................................................................................... Functional description General description The Alcatel-Lucent Remote Radio Head 2X60W product is the latest generation of UMTS cell site equipment.
Functional description .................................................................................................................................................................................................................................... • • Rx AIT CPRI ports/Rates: 2 / HW ready 3,4,5 External view This is a view of an RRH 2X60W with 2 antenna connections: PRELIMINARY ........................................................................................................................
PRELIMINARY Product overview Physical description .................................................................................................................................................................................................................................... Physical description Overview This topic covers RRH top and bottom descriptions, ancillary and grounding information.
Physical description .................................................................................................................................................................................................................................... Bottom view of the RRH Bottom view of the RRH 2X60W-850: PRELIMINARY ............................................................................................................................................................................................
PRELIMINARY Product overview Physical description .................................................................................................................................................................................................................................... Bottom view of the RRH 2X60W-1900: PRELIMINARY For details on the RRH connectors refer to “RRH connectors” (p. 3-8). .............................................................................................................
Physical description .................................................................................................................................................................................................................................... Top view of the RRH Top view of the RRH 2X60W-850: PRELIMINARY Product overview Top view of the RRH 2X60W-1900: PRELIMINARY ..................................................................................................................................
PRELIMINARY Product overview Physical description ....................................................................................................................................................................................................................................
Physical description ....................................................................................................................................................................................................................................
PRELIMINARY Product overview Physical description .................................................................................................................................................................................................................................... RRH 2X60-xx ancillary Item TMA Quantity 1 Comments AISG 2.
Physical description .................................................................................................................................................................................................................................... The ground cable is connected to the RRH with M6 screw and cable with a simple or double lug. PRELIMINARY ........................................................................................................................................................
PRELIMINARY Product overview Equipment .................................................................................................................................................................................................................................... Equipment Physical features This topic covers the RRH weights and dimensions. Weights and dimensions The following table provides RRH weights and dimensions.
Mounting locations .................................................................................................................................................................................................................................... Mounting locations Mounting configurations The RRH can be mounted in three standard configurations: • Pole-mounted (using either pole bands or through bolts) • • Wall-mounted Floorstand-mounted.
PRELIMINARY Product overview Mounting locations .................................................................................................................................................................................................................................... PRELIMINARY Floor stand The following diagram shows a floor stand mounted RRH 2X60W: ...............................................................................................................................................
Mounting locations .................................................................................................................................................................................................................................... PRELIMINARY ....................................................................................................................................................................................................................................
PRELIMINARY PRELIMINARY Product overview Mounting locations .................................................................................................................................................................................................................................... ...........................................................................................................................................................................................................................
PRELIMINARY 4 Site configurations 4 Overview Purpose This chapter provides information about the RRH 2X60W radio and CPRI configurations. Contents RF configurations 4-2 CPRI configurations 4-3 PRELIMINARY ...................................................................................................................................................................................................................................
PRELIMINARY Site configurations RF configurations .................................................................................................................................................................................................................................... RF configurations Physical RF connections The RF capacity is measured in sectors, carriers, and RF signal power. The RF capacity determines what components appear in the RRH and what antenna connections are required.
CPRI configurations ....................................................................................................................................................................................................................................
PRELIMINARY Site configurations CPRI configurations .................................................................................................................................................................................................................................... For the 9926 d2U the second Tx path is enabled.
PRELIMINARY 5 Site requirements 5 Overview Purpose This chapter describes the site requirements for the following RRHs: • • RRH 2X60-850 RRH 2X60-1900 Contents Environmental requirements 5-2 General site requirements 5-3 RRH clearances 5-4 Site requirements for pole mount installations 5-5 Site requirements for wall mount installations 5-9 Site requirements for floor stand installations 5-13 PRELIMINARY ......................................................................................
PRELIMINARY Site requirements Environmental requirements .................................................................................................................................................................................................................................... Environmental requirements Outdoor environment The outdoor RRH is weather-hardened, which enables it to operate in environments within the conditions described in the following table.
General site requirements .................................................................................................................................................................................................................................... General site requirements General requirements The following general requirements must be met before the installation of the RRH can begin: • • • Adequate clearance must be provided for service access.
PRELIMINARY Site requirements RRH clearances .................................................................................................................................................................................................................................... RRH clearances Minimum clearances table The following table provides the minimum wall mount clearances recommended around the RRH. RRH Clearances mm (inches) Comments Front 1000 (39.37) Installation access Rear 70 (2.
Site requirements for pole mount installations .................................................................................................................................................................................................................................... Site requirements for pole mount installations Prepare site for pole mounting installation The following are required to prepare a site for pole mounting installation of the RRH.
PRELIMINARY Site requirements Site requirements for pole mount installations .................................................................................................................................................................................................................................... The grip ranges for pole braket of : • • 85 mm is: 51 mm to 150 mm. 50 mm is: 50 mm to 150 mm. Drill pattern for through pole bolts Drill pattern for pole mounting PRELIMINARY 350 (13.78) ........
Site requirements for pole mount installations .................................................................................................................................................................................................................................... Pole mounting installation The following graphic shows the pole mounting installation: PRELIMINARY ....................................................................................................................................
PRELIMINARY PRELIMINARY Site requirements Site requirements for pole mount installations .................................................................................................................................................................................................................................... Example for pole mounting RRH mounted with standard weldments: .............................................................................................................................
Site requirements for wall mount installations .................................................................................................................................................................................................................................... Site requirements for wall mount installations Overview This topic describes site requirements for RRH installation on a wall.
PRELIMINARY PRELIMINARY Site requirements Site requirements for wall mount installations .................................................................................................................................................................................................................................... Wall mount brackets mounting holes The following figure shows the drill pattern for the wall mounting bracket holes. .......................................................................
Site requirements for wall mount installations .................................................................................................................................................................................................................................... Strut mounting hardware The following photo illustrates the hardware that is required to mount a strut on a concrete wall and the RRH to the strut.
PRELIMINARY Site requirements Site requirements for wall mount installations .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Site requirements for floor stand installations .................................................................................................................................................................................................................................... Site requirements for floor stand installations Overview This topic describes site requirements for RRH installation on a floor, such as the location and drilling of anchor holes for the floor stand.
PRELIMINARY Site requirements Site requirements for floor stand installations .................................................................................................................................................................................................................................... The following figure shows the drill pattern for the floor stand anchor holes.
Site requirements for floor stand installations .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
PRELIMINARY PRELIMINARY Site requirements Site requirements for floor stand installations .................................................................................................................................................................................................................................... .............................................................................................................................................................................................