APPLICANT: Alcatel-Lucent EXHIBIT 3 FCC ID: AS5BBTRX-14 EXHIBIT 3 Section 2.1033 (c)(3) INSTALLATION AND OPERATING INSTRUCTIONS A copy of the installation and operating instructions to be furnished to the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to the FCC when it becomes available. Response A copy of Alcatel-Lucent 9763 MCI B25 PCS LTE 2x250mW, AC Hardware Installation manual is attached to this exhibit.
Use pursuant to applicable agreements Title page Alcatel-Lucent 9763 Metro Cell Indoor B25 LTE 2x250mW Operation and Installation 3MN-MCI-IMOP Issue 1 | December 2013 Alcatel-Lucent – Proprietary Use pursuant to applicable agreements
Use pursuant to applicable agreements Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2013 Alcatel-Lucent. All rights reserved.
Contents About this document Purpose ............................................................................................................................................................................................. xi xi Reason for reissue ........................................................................................................................................................................ xi xi Supported systems ...............................................................
Contents .................................................................................................................................................................................................................................... Hardware and ancillary items 3 ............................................................................................................................................ 2-10 2-10 9763 MCI installation Overview ..........................................................
List of tables 3-1 Recommended wall anchor materials ................................................................................................................ 3-4 ....................................................................................................................................................................................................................................
List of tables .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
List of figures 2-1 9763 MCI hardware- front and back views ..................................................................................................... 2-3 2-2 9763 MCI connection interfaces 2-3 LED position and orientation 2-4 Wall mount Installation example 2-5 9763 MCI daisy chain installation example .....................................................................................................
List of figures .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
List of procedures 3 9763 MCI installation 3-1 Mount the 9763 MCI onto a wall ...................................................................................................................... 3-10 ....................................................................................................................................................................................................................................
List of procedures .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
About this document About this document Purpose The purpose of this document is to provide product operation information and hardware installation instructions for an Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW. Reason for reissue The reissue reasons are: Issue number Issue Date Reason for reissue 1 December 2013 Standard Supported systems This document applies to the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW.
About this document .................................................................................................................................................................................................................................... Prerequisites None Conventions used Vocabulary conventions In this document the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW is also referred to as the 9763 MCI V1.0 B25 LTE 2x250mW, or simply the 9763 MCI.
About this document .................................................................................................................................................................................................................................... Standard cross-sections and wire diameter of round copper conductors The following table is from CEI/IEC 60947-1:2004, Table 1, Standard cross-sections of round copper conductors and approximate relationship between mm 2 and AWG/kcmil sizes for reference.
About this document .................................................................................................................................................................................................................................... Document support For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at the following telephone numbers. These numbers apply for document support only.
1 Safety statements 1 Overview Purpose This chapter provides general information on the structure of safety instructions and summarizes general safety requirements. General safety and residual risk The equipment has been developed in line with state-of-the-art technology and conforms with current national and international safety requirements. The equipment is considered safe during normal operation when safe working practices are complied with.
Safety statements Structure of safety statements .................................................................................................................................................................................................................................... Structure of safety statements Overview This topic describes the components of safety statements that appear in this document.
Safety statements Structure of safety statements .................................................................................................................................................................................................................................... Signal words The signal words identify the hazard severity levels as follows: Signal word Meaning DANGER Indicates an extremely hazardous situation which, if not avoided, will result in death or serious injury.
Safety statements Safety .................................................................................................................................................................................................................................... Safety General precautions for installation procedures WARNING Failure to observe these safety precautions may result in personal injury or damage to equipment. • • • Read and understand all instructions.
Safety statements Safety - specific hazards .................................................................................................................................................................................................................................... Safety - specific hazards DANGER Electric-shock hazard Working in severe weather can result in personal injury or death and damage to the equipment.
Safety statements Safety - specific hazards .................................................................................................................................................................................................................................... WARNING Laser hazard Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.
Safety statements Safety - specific hazards .................................................................................................................................................................................................................................... CAUTION Hot-surface hazard The surfaces of the MCI can become hot enough to cause burns on unprotected skin.
Safety statements Safety - specific hazards ....................................................................................................................................................................................................................................
Safety statements Product safety .................................................................................................................................................................................................................................... Product safety Equipment safety Safety information for this equipment can be found on various Caution, Warning, Danger, information labels or instructions affixed to or included with the product or included within this document.
Safety statements Product safety .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
2 2 ardware architecture H and functionality Overview Purpose This chapter provides an overview of the hardware architecture and product functionality of the Alcatel-Lucent 9763 Metro Cell Indoor. Contents Functional description 2-2 Physical description 2-3 Supported installation options 2-8 Hardware and ancillary items 2-10 ..............................................................................................................................................................................
Hardware architecture and functionality Functional description .................................................................................................................................................................................................................................... Functional description General description Alcatel-Lucent Metro Cells product family enables mobile service providers (MSPs) to deliver cost-effective capacity to high-density areas.
Hardware architecture and functionality Physical description ....................................................................................................................................................................................................................................
Hardware architecture and functionality Physical description .................................................................................................................................................................................................................................... Connection interfaces The following figure shows the connection interfaces for the 9763 MCI.
Hardware architecture and functionality Physical description .................................................................................................................................................................................................................................... The AC input port satisfies the first and second level surge protection requirements specified for port type 7 in GR-1089, Issue 6. Voltage spikes with a duration of ≤10µs are ignored.
Hardware architecture and functionality Physical description .................................................................................................................................................................................................................................... Figure 2-3 LED position and orientation LED Product labelling The 9763 MCI module has the following labelling: 1.
Hardware architecture and functionality Physical description .................................................................................................................................................................................................................................... 3.
Hardware architecture and functionality Supported installation options .................................................................................................................................................................................................................................... Supported installation options Overview The following section describes the supported installation options for the Alcatel-Lucent 9763 Metro Cell Indoor V1.0 B25 LTE 2x250mW product.
Hardware architecture and functionality Supported installation options ....................................................................................................................................................................................................................................
Hardware architecture and functionality Hardware and ancillary items .................................................................................................................................................................................................................................... Hardware and ancillary items Overview The following section lists the Alcatel-Lucent 9763 Metro Cell Indoor V1.
Hardware architecture and functionality Hardware and ancillary items ....................................................................................................................................................................................................................................
Hardware architecture and functionality Hardware and ancillary items .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................................
3 9763 MCI installation 3 Overview Purpose This chapter provides information and procedures for mounting the Alcatel-Lucent 9763 Metro Cell Indoor onto a wall. Contents 9763 MCI pre-installation 3-2 9763 MCI Pre-installation information 3-3 9763 MCI installation clearances 3-5 9763 MCI daisy chain requirements 3-6 9763 MCI installation 3-9 Procedure 3-1: Mount the 9763 MCI onto a wall 3-10 ........................................................................................................
9763 MCI installation 9763 MCI pre-installation Overview ....................................................................................................................................................................................................................................
9763 MCI installation 9763 MCI pre-installation 9763 MCI Pre-installation information .................................................................................................................................................................................................................................... 9763 MCI Pre-installation information Verify site preparation The following site preparation requirements should be checked and met before the installation of the equipment can begin.
9763 MCI installation 9763 MCI pre-installation 9763 MCI Pre-installation information .................................................................................................................................................................................................................................... Table 3-1 Recommended wall anchor materials Surface structure Recommended anchor materials Recommended screw torque Wood Screw Hex T M8x70 stainless steel (x4) 7.0 N.m (62.0 lb.in).
9763 MCI installation 9763 MCI pre-installation 9763 MCI installation clearances .................................................................................................................................................................................................................................... 9763 MCI installation clearances Minimum installation clearances The following provides the minimum wall mount clearances recommended around the Alcatel-Lucent 9763 Metro Cell Indoor V1.
9763 MCI installation 9763 MCI pre-installation 9763 MCI daisy chain requirements ....................................................................................................................................................................................................................................
9763 MCI installation 9763 MCI pre-installation 9763 MCI daisy chain requirements .................................................................................................................................................................................................................................... Optical link for backhaul and daisy chain The following shows the deployment scenario for optical backhaul and daisy chaining.
9763 MCI installation 9763 MCI pre-installation 9763 MCI daisy chain requirements ....................................................................................................................................................................................................................................
9763 MCI installation 9763 MCI installation Overview .................................................................................................................................................................................................................................... 9763 MCI installation Overview Purpose This section provides the installation instructions for mounting the Alcatel-Lucent 9763 Metro Cell Indoor onto a wall. Contents Procedure 3-1: Mount the 9763 MCI onto a wall 3-10 .....
9763 MCI installation 9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall ....................................................................................................................................................................................................................................
9763 MCI installation 9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall .................................................................................................................................................................................................................................... • • As a prerequisite, backhaul cable has been routed from the backhaul system to the 9763 MCI.
9763 MCI installation 9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall .................................................................................................................................................................................................................................... NOTICE ESD hazard Semiconductor devices can be damaged by electrostatic discharges (ESD) Always observe the general ESD instructions for handling modules containing semiconductor components.
9763 MCI installation 9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall .................................................................................................................................................................................................................................... Ensure that the power that feeds the AC power cable to the 9763 MCI is OFF. Block access so that no one can restore power to that cable during this procedure.
9763 MCI installation Procedure 3-1: Mount the 9763 MCI onto a wall .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................
Appendix A: LED State Description Overview Purpose This chapter describes the LED status and descriptions for 9763 MCI. Contents LED status for 9763 MCI A-2 ...................................................................................................................................................................................................................................
LED State Description LED status for 9763 MCI .................................................................................................................................................................................................................................... LED status for 9763 MCI Overview This topic describes the LED status of the 9763 MCI device.
LED State Description LED status for 9763 MCI .................................................................................................................................................................................................................................... State Description LED Cell is operational Cell has been in stable operation for 15 minutes OFF ......................................................................................................................................
LED State Description LED status for 9763 MCI .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
Appendix B: Product conformance statements Overview Purpose This section presents the product conformance statements that apply to the Alcatel-Lucent 9763 Metro Cell Indoor access point equipment. The statements that are required are determined primarily by national or multi-national regulations. However, in some regions, contract terms determine which statements are required. The presence of the statement indicates that the product does comply with that statement wherever it is required to do so.
Product conformance statements United States compliance Introduction .................................................................................................................................................................................................................................... United States compliance Introduction Purpose The statements that follow are the product conformance statements that apply to the Alcatel-Lucent 9763 Metro Cell Indoor when deployed in the United States.
Product conformance statements United States compliance Federal Communications Commission .................................................................................................................................................................................................................................... Federal Communications Commission Federal Communications Commission Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.
Product conformance statements United States compliance Product safety conformance statements ....................................................................................................................................................................................................................................
Product conformance statements United States compliance Antenna exposure statements .................................................................................................................................................................................................................................... Antenna exposure statements Antenna exposure Equipment with integrated antennas This equipment complies with FCC RF radiation exposure limits set forth in 47 CFR Part 1, Subpart I, Section 1.
Product conformance statements United States compliance FDA/IEC optical transmitter product compliance statements ....................................................................................................................................................................................................................................
Product conformance statements United States compliance Eco-environmental statements ....................................................................................................................................................................................................................................
Product conformance statements Eco-environmental statements .................................................................................................................................................................................................................................... ............................................................................................................................................................................................................................
Glossary ................................................................................................................................................................................................................................... Numerics 3GPP 3rd Generation Partnership Project ................................................................................................................................................................................................................................
Glossary .................................................................................................................................................................................................................................... AWG (American Wire Gauge) American standard for classifying wire diameter. .....................................................................................................................................................................................................
Glossary .................................................................................................................................................................................................................................... CFR Code of Federal Regulations Circuit 1. The complete path between two terminals over which one-way or two-way communications may be provided. 2. An electronic path between two or more points, capable of providing a number of channels. 3.
Glossary .................................................................................................................................................................................................................................... Diversity A method of radio transmission and/or reception, which counteracts the effects of fading by combining several signals all bearing the same information.
Glossary .................................................................................................................................................................................................................................... during temporary and short-duration peaks for which the rectifier output is insufficient. Frequency For a periodic wave, such as alternating current, the number of complete cycles per unit of time. The unit of frequency is cycles per second, or hertz.
Glossary .................................................................................................................................................................................................................................... Guy Steel wire or rope used to hold a pole upright. ............................................................................................................................................................................................................................
Glossary .................................................................................................................................................................................................................................... Cell site walk-through where site preparation activities are verified prior to installing the 9412 eNodeB Compact equipment.
Glossary .................................................................................................................................................................................................................................... Phase The number of separate voltage waves in commercial alternating current, designated as "single phase", "three phase", etc. Pigtail A short length of electrical conductor permanently affixed to a component, used to connect the component to another.
Glossary .................................................................................................................................................................................................................................... Service provider Customer who purchases switching and Site equipment from system vendors, which, in turn, is provided to end-user subscribers through resellers and distribution channels.
Glossary .................................................................................................................................................................................................................................... TRDU (Transmit Receive Duplex Unit) Twisted pair cable Cable made up of one or more separately insulated twisted-wire pairs, none of which is arranged with another to form quads. Tx (Transmit) TYP (Typical) .................................................................
Glossary .................................................................................................................................................................................................................................... Walk-through A critical examination of a design or product undertaken to ensure that it is of adequate quality. Waveform The characteristic shape of a periodic wave, determined by the frequencies present and their amplitudes and relative phases.
Glossary .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
Index A about this document glossary, GL-1 Ancillary orderable items, 2-7 RF antenna, 2-5 AWG conversion table, xiii ............................................................. B Backhaul, 2-5 Basic site requirements Installation clearances, 3-5 Pre-installation, 3-3 SFP modules, 2-10 Product base items, 2-7 Hardware architecture and functionality, 2-1 Antenna GPS antenna, 2-5 Power, 2-10 ............................................................. I Installation materials, 3-3 .............
Index .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................